767
edits
Changes
no edit summary
{{InfoBoxBottom}}
The following picture shows block diagram of NaonEVB-Lite Mid board.
[[File:Naonevb-mid-block diagram.png|thumbnail|center|300px|NaonEVB-Mid block diagram]]
This section describes how to quick start NaonEVB-Mid-based system, provided that it is programmed according to NELK configuration.
# connect the serial cable, provided with the board, to J17connector
# connect this cable to PC COM port through a NULL-modem cable (not provided)
# start your favourite terminal software on PC; communication parameters are:
# (optional) to connect the system to Ethernet LAN, please plug cable on connector J11
# (optional) to connect the system to HDMI TV/LCD, please plug cable on connector J6
# connect a 12Vcc power supply to J14as shown in the following picture: [[File:Naonevb-mid-power-connector.jpg|thumb|none|border|300px]] Once power has been applied, U-Boot bootloader will be executed and the following messages will be printed on serial console (please note that messages may vary due different U-Boot releases): <pre class="board-terminal">U-Boot 2010.06-00011-gd371eb4 (Apr 22 2013 - 12:17:17) [nelk-4.0.0-Naon-min] TI8148-GP rev 2.1 ARM clk: 600MHzDDR clk: 400MHzL3 clk: 200MHzDSS clk: 200MHzIVA clk: 266MHzISS clk: 400MHzDSP clk: 500MHz DRAM: 512 MiBUsing default environment Hit any key to stop autoboot: 0 8192 KiB AT45DB642D at 0:0 is now current device## Starting application at 0x81000000 ... U-Boot 2010.06-00011-gd371eb4 (Apr 22 2013 - 12:17:53) [nelk-4.0.0-Naon] TI8148-GP rev 2.1 ARM clk: 600MHzDDR clk: 400MHzL3 clk: 200MHzDSS clk: 200MHzIVA clk: 266MHzISS clk: 400MHzDSP clk: 500MHz I2C: readyDRAM: 512 MiBNAND: HW ECC BCH8 Selected1024 MiBMMC: OMAP SD/MMC: 0MUX: configuring for evb_midNet: Detected MACID:00:50:C2:1E:AF:E3cpswNAON#</pre>
===Hardware information===
====Bootstrap settings====
Please refer to [[Bootstrap settings (NaonEVB-Mid)]]
====JTAG interfaces====
====Video interfaces====
NaonEVB-Mid provides a rich set of video input/output interfaces. Please refer to [[Video input/output interfaces (NaonEVB-Mid)|this page]] for more details.
PDF files show the view of the default BOM variant used to manufacture the board. Components that are not populated are denoted as "Do Not Stuff".}}
* Orcad: http://www.dave.eu/downloadsystem/restrictedfiles/naonarea-riservata/naonevb-mid-1.0.6.zip* PDF: http:/nelk/2www.0dave.0eu/system/files/hwarea-riservata/NAONEVBnaonevb-MIDmid-1NADP_S-NADP0000C0R_1.0.6.zippdf == PinMux == * PDFFile .dat for the [http://www.ti.com/tool/pinmuxtool PinMux utility] containing the cpu pin configuration for the NaonEVB-Mid carrier board : http://www.dave.eu/downloadsystem/files/restrictedarea-riservata/naon-evbs-pinmux.zip ==BOM==* http:/nelk/2www.0dave.0eu/system/files/hwarea-riservata/NaonEVBnaonevb-Midmid-BOM_S.NADP0000C0R.1.0.6.pdfzip==Layout==Layout* http://www.dave.eu/system/files/area-riservata/naonevb-mid-CS064311A_component_view.pdf==Mechanical==* DXF: http://www.dave.eu/downloadsystem/files/restrictedarea-riservata/naonnaonevb-mid-CS064311A.zip* IDF (3D): http:/nelk/2www.0dave.0eu/system/files/hwarea-riservata/NaonEVBnaonevb-mid-MidCS064311-CS064311A3D.pdfzip