Difference between revisions of "AxelEVB-Lite-Adapter (AxelLite)"

From DAVE Developer's Wiki
Jump to: navigation, search
m (→‎Boot mode selection)
(35 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
{{WorkInProgress}}
 
{{InfoBoxTop}}
 
{{InfoBoxTop}}
 
{{AppliesToAxelLite}}
 
{{AppliesToAxelLite}}
 
{{InfoBoxBottom}}
 
{{InfoBoxBottom}}
−
 
−
{{ObsoleteWikiPage|link=AXEL_Lite_SOM/AXEL_Lite_Evaluation_Kit}}
 
  
 
== Introduction ==
 
== Introduction ==
Line 16: Line 15:
 
* routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors
 
* routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors
  
−
{{ImportantMessage|text=There are two versions of the adapter. Revision 0 is used in combination with the [[AxelEVB-Lite_rev.0|AxelEVB-Lite revision 0]]. Revision A is used in combination with the [[AxelEVB-Lite|AxelEVB-Lite revision A]].}}
+
The following images show the top and bottom views of the AxelEVB-Lite-Adapter:
−
 
 
−
===Revision 0===
 
−
The following images show the top and bottom views of the AxelEVB-Lite-Adapter revision 0:
 
  
−
[[Image:Axellite-adapter-top1.jpg|thumb|none|border|350px|Top view]]
+
[[Image:Axellite-adapter-top.jpg|thumb|none|border|350px|Top view]]
 
[[Image:Axellite-adapter-bottom.jpg|thumb|none|border|350px|Bottom view]]
 
[[Image:Axellite-adapter-bottom.jpg|thumb|none|border|350px|Bottom view]]
−
 
−
===Revision A===
 
−
The following images show the top and bottom views of the AxelEVB-Lite-Adapter revision A:
 
−
 
−
[[Image:Axellite-adapter-rev.A-top.jpg|thumb|none|border|350px|Top view]]
 
−
[[Image:Axellite-adapter-rev.A-bottom.jpg|thumb|none|border|350px|Bottom view]]
 
  
 
== Connectors' pinout ==
 
== Connectors' pinout ==
Line 73: Line 63:
 
|}
 
|}
  
−
== Boot mode selection ==
+
=== J5 - MicroSD ===
−
The following sections detail how to select the boot option depending on the adapter's revision.
+
 
 +
The signals of the SD1 interface are routed to the J5 microSD memory card connector. The following table reports the connector's pinout:
  
−
For further details, please refer to [[Boot_options_(AxelLite) | this page]], which describes the available boot modes thoroughly.
+
{| class="wikitable"  
−
===Revision 0===
 
−
This adapter provides a switch that allows selecting the boot device according to the following table. The available boot options differ depending on the Axel Lite type. In this regard, there are basically two types: those that are equipped with both NOR and NAND flash, and those that are equipped with NAND flash only.
 
−
{| class="wikitable"
 
−
|+
 
−
! rowspan="2" |Axel Lite type
 
−
! colspan="2" |S1.2
 
−
position
 
 
|-
 
|-
−
!on
+
!Pin#
−
!off
+
!Pin name
 +
!Function
 +
!Notes
 
|-
 
|-
−
|NOR and NAND flash
+
|1 ||SD1_DAT2||| DATA[2] || -
−
|microSD card
 
−
|NOR flash
 
 
|-
 
|-
−
|NAND flash only
+
|2 ||SD1_DAT3||| Card Detect/DATA[3] || -
−
|microSD card
+
|-
−
|NAND flash
+
|3 ||SD1_CMD||| CMD line || -
−
|}
+
|-
−
It is worth remembering that, when using Axel Lite in combination with AxelEVB-Lite revision 0, the S5, S6, S7, S8, and S9 switches of the carrier board don't affect the boot options.
+
|4 ||ADP_3.3V||| Power Supply || -
−
===Revision A===
+
|-
−
Revision A does not integrate any switch. To select the boot source, please use the S9.2 switch provided by the [[AxelEVB-Lite#Boot_configurations|AxelEVB-Lite rev. A]] board instead.
+
|5 ||SD1_CLK||| Clock || -
−
 
+
|-
−
The selectable boot options differ depending on the Axel Lite type. In this regard, there are basically two types: those that are equipped with both NOR and NAND flash, and those that are equipped with NAND flash only.
+
|6, 9, 10, 11, 12 ||DGND||| - || -
−
 
+
|-
−
{| class="wikitable"
+
|7 ||SD1_DAT0||| DATA[0] || -
−
|+
 
−
! rowspan="2" |Axel Lite type
 
−
! colspan="2" |S9.2
 
−
position
 
 
|-
 
|-
−
!on
+
|8 ||SD1_DAT1||| DATA[1] || -
−
!off
 
 
|-
 
|-
−
|NOR and NAND flash
+
|13 ||ADP_3.3V|| - ||Pull up to 3.3V with 10K Ohm -
−
|microSD card
 
−
|NOR flash
 
 
|-
 
|-
−
|NAND flash only
 
−
|microSD card
 
−
|NAND flash
 
 
|}
 
|}
  
−
==Technical documentation==
+
== Boot mode selection ==
−
=== Revision 0 ===
+
 
−
====Schematics====
+
S1 is a 2-way dip switch for the boot mode selection.
−
* Orcad: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1.dsn__0.zip
+
 
−
* PDF: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1-color.pdf
+
For further details, please refer to [[Boot_options_(AxelLite) | Axel Lite boot options]]
−
====BOM====
+
 
−
* http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_S.XLADP0000I0R.0.9.1.BOM_.csv__0.zip
+
==Schematics==
−
====Layout====
+
* Orcad: coming soon
−
* http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214_Assem.pdf
+
* PDF: coming soon
−
====Mechanical Drawings ====
+
 
−
*DXF (2D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214-DXF.zip
+
==BOM==
−
*IDF (3D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-0/axelevb-lite-adapter-CS010214-IDF.zip
+
* coming soon
 +
 
 +
==Layout==
 +
* coming soon
  
−
=== Revision A ===
+
==CAD Drawings ==
−
====Schematics====
+
* DXF (2D): coming soon
−
* Orcad: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0.dsn__0.zip
+
* IDF (3D): coming soon
−
* PDF: http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0-color_0.pdf
 
−
====BOM====
 
−
* http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_S.XLADP0000I0R.1.0.0.BOM_.csv__0.zip
 
−
====Layout====
 
−
* http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A_assem_view_0.pdf
 
−
====Mechanical Drawings ====
 
−
* DXF (2D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A-DXF.zip
 
−
* IDF (3D): http://mirror.dave.eu/axel/hw/AxelEVBLite-Adapter/rev-A/axelevb-lite-adapter-CS010214A-IDF.zip
 

Revision as of 08:50, 11 April 2014

HOME SOMs SBCs ToloMEO Embedded Assistant Sale-tag.pngGET A QUOTE Customer-service.pngONLINE HELPDESK
Roadmap IoT Services ML/AI services Embedded Design Services

WorkInProgress.gif

Info Box
Axel-lite 02.png Applies to Axel Lite

Introduction[edit | edit source]

Axel Lite requires a dedicated adapter to be plugged to the AxelEVB-Lite carrier board. This adapter:

  • provides the SODIMM socket for the AxelLite SOM
  • provides the following additional features:
    • microSD slot (for SD boot)
    • JTAG connector
    • dip-switch for boot mode selection
  • routes the signals from the AxelLite pins to the AxelEVB-Lite mating connectors

The following images show the top and bottom views of the AxelEVB-Lite-Adapter:

Top view
Bottom view

Connectors' pinout[edit | edit source]

J6 - SODIMM connector[edit | edit source]

J6 is a TE Connectivity 204-pin SODIMM socket. The pinout matches the Axel Lite pinout.

J1, J2, J3 - AxelEVB-Lite mating connectors[edit | edit source]

J1, J2 and J3 are Hirose FX8C-140S-SV connectors that match the AxelEVB-Lite SOM connectors' pinout.

J4 - JTAG[edit | edit source]

J4 is a SAMTEC FSI-110-03-G-S connector. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 DGND - -
2 JTAG_TCK - -
3 JTAG_TMS - -
4 JTAG_TDO - -
5 JTAG_TDI - -
6 JTAG_nTRST - -
7 CPU_PORn - -
8 N.C. - -
9 N.C. - -
10 JTAG_VREF - -

J5 - MicroSD[edit | edit source]

The signals of the SD1 interface are routed to the J5 microSD memory card connector. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 SD1_DAT2 DATA[2] -
2 SD1_DAT3 Card Detect/DATA[3] -
3 SD1_CMD CMD line -
4 ADP_3.3V Power Supply -
5 SD1_CLK Clock -
6, 9, 10, 11, 12 DGND - -
7 SD1_DAT0 DATA[0] -
8 SD1_DAT1 DATA[1] -
13 ADP_3.3V - Pull up to 3.3V with 10K Ohm -

Boot mode selection[edit | edit source]

S1 is a 2-way dip switch for the boot mode selection.

For further details, please refer to Axel Lite boot options

Schematics[edit | edit source]

  • Orcad: coming soon
  • PDF: coming soon

BOM[edit | edit source]

  • coming soon

Layout[edit | edit source]

  • coming soon

CAD Drawings[edit | edit source]

  • DXF (2D): coming soon
  • IDF (3D): coming soon
HOME SOMs SBCs ToloMEO Embedded Assistant Sale-tag.pngGET A QUOTE Customer-service.pngONLINE HELPDESK
Roadmap IoT Services ML/AI services Embedded Design Services
Retrieved from "https://wiki.dave.eu/index.php?title=AxelEVB-Lite-Adapter_(AxelLite)&oldid=2988"