170
edits
Changes
no edit summary
== Quick start guide ==
This chapter describes how to quickly start working with the SDVX kit. The following paragraphs will guide you through the setup and installation procedures.
===Kit registration===
{{ImportantMessage|text='''Customers are strongly recommended to register their kits'''. Registration grants access to reserved material such as source code and additional documentation.
To register the kit, please send an email to [mailto:support-sdvx@dave.eu], [[Development_Kits_Identification_Codes|providing the kit P/N and S/N]].
If you also wish to access git repositories containing source code, please follow the procedure described [[Accessing_DAVE_Embedded_Systems_restricted_git_repositories|here]].}}
===Target setup and first boot===
This section describes how to quick start SDV04 board delivered along with SDVX kit (see also the following image):
* Connect a serial cable between the J8 connector on the SDV04 board and PC COM port through a null-modem (https://en.wikipedia.org/wiki/Null_modem) cable (not provided)
*on host side start your favorite terminal that will be used to interact with the target's serial console; communication parameters are 115200-8-N-1
*optionally connect the system to Ethernet LAN by plugging cable into connector J10
*connect 12V power supply to J35 connector; J16 pinout is:
**1: GND
**2: VIN
*insert microSD card in the slot J13.
===Host setup===
===Target configuration for the development stage (<code>net_nfs</code>)===
===Target configuration for standalone boot===
===How to update root file system on SD card===
==== Update rfs on target====
==== Update rfs on a Linux PC====
===Developing the software for the target===