Changes

Jump to: navigation, search

Diva Embedded Linux Kit (DIVELK)

55 bytes removed, 08:01, 20 June 2017
Target setup and first boot
The following dump shows the typical messages printed out to the console during bootstrap process.
<pre class="mw-collapsible mw-collapsed">
U-Boot SPL 2015.07-divelk-3.0.0 (May 31 2017 - 10:13:07)
WARNING: ConfigID on block 3 is UNLOCKED
reading u-boot.img
reading u-boot.img
I2C: ready
DRAM: 512 MiB
NAND: 512 1024 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
*** Warning - bad CRC, using default environment
 
CB ConfigID CRC mismatch for 0x00000000 (was 0x00000000, expected 0x2144df1c) at block 3 (offset 96): using default
Display: AM800480STMQW_TA1 (800x480)
SF: Detected S25FL256S_64K with page size 256 Bytes, erase size 64 KiB, total 32 MiB
device 0 offset 0x780000, size 0x4000000x119436SF: 4194304 1152054 bytes @ 0x780000 Read: OKError: no valid bmp image at 8f000002WARNING: ConfigID on block 0 3 is UNLOCKED
SOM ConfigID#: 00000001
SOM UniqueID#: 000020390000c661:1c0bc968
CB ConfigID CRC mismatch for 0x00000000 (was 0x00000000, expected 0x2144df1c) at block 3 (offset 96): using default
CB ConfigID#: ffffffff
mmc0 is current device
reading boot.scr
877 787 bytes read in 4 ms (213191.9 4 KiB/s)
Running bootscript from mmc ...
## Executing script at 80200000
bootscript generated with command "mkimage -A ARM -T script -C none -n DIVA -d bootscript.txt boot.scr"
Booting DIVELK via mmcboot with divelk-3.0.0_am335x-divelk.dtb as device tree
reading splash_image.bmp
1152054 bytes read in 72 ms (15.3 MiB/s)
reading divelk-3.0.0_uImage
4148488 bytes read in 243 ms (16.3 MiB/s)
reading divelk-3.0.0_am335x-divelk.dtb
39558 bytes read in 9 ms (4.2 MiB/s)
FDT: override 'som_uniqueid' with '000020390000c661:1c0bc968'
FDT: override 'cb_uniqueid' with '00000000:00000000'
## Booting kernel from Legacy Image at 80007fc0 ...
8,154
edits

Navigation menu