Changes

[ 0.000000] Linux version 3.12.10-divelk-2.0.0 (amon@linuxserver2) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313 - Linaro GCC 2013.03) ) #26 SMP Sat Sep 13 10:45:59 CEST 2014

[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 rw console=ttyO0,115200n8 consoleblank=0mtdparts=omap2-nand.0:128k(SPL),128k(SPL.backup1),128k(SPL.backup2),128k(SPL.backup3),1920k(u-boot),128k(u-boot-env),128k(fdt),6m(kernel),-(rootfs);spi1.0:256k(MLO),512k(u-boot),256k(env1),256k(env2),256k(fdt),6m(kernel),-(free)

[ 0.000405000409] Calibrating delay loop... 479.23 BogoMIPS (lpj=2396160)

[ 0.119961119964] Mount-cache hash table entries: 512[ 0.131807131811] CPU: Testing write buffer coherency: ok

[ 0.137485137504] Brought up 1 CPUs[ 0.137511137533] SMP: Total of 1 processors activated.[ 0.137522137544] CPU: All CPU(s) started in SVC mode.[ 0.138562138587] devtmpfs: initialized[ 0.143500143587] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3[ 0.209514209601] omap_hwmod: debugss: _wait_target_disable failed[ 0.210503210581] pinctrl core: initialized pinctrl subsystem[ 0.211769211857] regulator-dummy: no parameters[ 0.214592214690] NET: Registered protocol family 16[ 0.217656217798] DMA: preallocated 256 KiB pool for atomic coherent allocations[ 0.221356221492] cpuidle: using governor ladder[ 0.221379221516] cpuidle: using governor menu[ 0.230598230756] platform mpu.1: FIXME: clock-name 'fck' DOES NOT exist in dt![ 0.232257232413] platform 49000000.edma: FIXME: clock-name 'fck' DOES NOT exist in dt![ 0.234050234218] OMAP GPIO hardware version 0.1[ 0.247603247827] omap-gpmc 50000000.gpmc: could not find pctldev for node /pinmux@44e10800/nandflash_pins_default, deferring probe[ 0.247645247871] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral[ 0.248269248489] platform 56000000.sgx: FIXME: clock-name 'fck' DOES NOT exist in dt![ 0.252788253038] DSS not supported on this SoC[ 0.252816253065] No ATAGs?[ 0.252829253079] hw-breakpoint: debug architecture 0x4 unsupported.[ 0.295867295970] bio: create slab <bio-0> at 0[ 0.319063319222] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver[ 0.320906321038] vin: 5000 mV [ 0.323602323718] SCSI subsystem initialized[ 0.325575325674] usbcore: registered new interface driver usbfs[ 0.325838325939] usbcore: registered new interface driver hub[ 0.326152326254] usbcore: registered new device driver usb[ 0.327258327385] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe[ 0.327292327421] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral[ 0.327812327950] pps_core: LinuxPPS API ver. 1 registered[ 0.327827327964] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.328025328161] PTP clock support registered[ 0.330806330978] Advanced Linux Sound Architecture Driver Initialized.[ 0.332504332716] Switched to clocksource timer1[ 0.363046363794] NET: Registered protocol family 2[ 0.363902364657] TCP established hash table entries: 4096 (order: 3, 32768 bytes)[ 0.364002364762] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)[ 0.364086364847] TCP: Hash tables configured (established 4096 bind 4096)[ 0.364165364928] TCP: reno registered[ 0.364185364948] UDP hash table entries: 256 (order: 1, 8192 bytes)[ 0.364213364976] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)[ 0.364496365256] NET: Registered protocol family 1[ 0.365004365759] RPC: Registered named UNIX socket transport module.[ 0.365020365774] RPC: Registered udp transport module.[ 0.365030365783] RPC: Registered tcp transport module.[ 0.365039365793] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.366220367016] NetWinder Floating Point Emulator V0.97 (double precision)[ 0.367011367827] PM: Loading am335x-pm-firmware.bin[ 0.529337530548] VFS: Disk quotas dquot_6.5.2[ 0.529528530738] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 0.530515531740] NFS: Registering the id_resolver key type[ 0.530615531867] Key type id_resolver registered[ 0.530627531880] Key type id_legacy registered[ 0.530999532254] NTFS driver 2.1.30 [Flags: R/W].[ 0.531052532307] jffs2: version 2.2. (NAND) (SUMMARY) © �© 2001-2006 Red Hat, Inc.[ 0.531276532535] msgmni has been set to 989[ 0.534486535449] NET: Registered protocol family 38[ 0.534558535511] io scheduler noop registered[ 0.534571535523] io scheduler deadline registered[ 0.534609535560] io scheduler cfq registered (default)[ 0.537228538175] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568[ 0.589511590593] Console: switching to colour frame buffer device 100x30[ 0.597265598277] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled[ 0.600799601816] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0[ 1.259200281209] console [ttyO0] enabled[ 1.264920286942] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20[ 1.288707310673] brd: module loaded[ 1.300807323060] loop: module loaded[ 1.311398333908] mtdoops: mtd device (mtddev=name/number) must be supplied[ 1.321358343735] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17[ 1.328988350969] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16[ 1.337003358842] m25p80 spi1.0: s25fl256s1 (32768 Kbytes)[ 1.346095364293] CAN 7 cmdlinepart partitions found on MTD device driver interfacespi1.0[ 1.352053370563] c_can_platform 481cc000Creating 7 MTD partitions on "spi1.d_can0": c_can_platform device registered (regs=fa1cc000, irq=68)[ 1.363406375888] usbcore0x000000000000-0x000000040000 : registered new interface driver asix"MLO"[ 1.369447383286] usbcore0x000000040000-0x0000000c0000 : registered new interface driver ax88179_178a[ "u-boot"[ 1.376425390594] usbcore0x0000000c0000-0x000000100000 : registered new interface driver cdc_ether"env1"[ 1.383027397868] usbcore0x000000100000-0x000000140000 : registered new interface driver r815x"env2"[ 1.389097405253] usbcore0x000000140000-0x000000180000 : registered new interface driver smsc95xx"fdt"[ 1.395481412191] usbcore0x000000180000-0x000000780000 : registered new interface driver net1080"kernel"[ 1.401742419714] usbcore0x000000780000-0x000002000000 : registered new interface driver cdc_subset"free"[ 1.408288428475] CAN device driver interface[ 1.434708] c_can_platform 481cc000.d_can: c_can_platform device registered (regs=fa1cc000, irq=68)[ 1.446015] usbcore: registered new interface driver zaurusasix[ 1.414649452044] usbcore: registered new interface driver cdc_ncmax88179_178a[ 1.421352458930] ehci_hcdusbcore: USB 2.0 'Enhanced' Host Controller (EHCI) Driverregistered new interface driver cdc_ether[ 1.428418465550] ehci-omapusbcore: OMAP-EHCI Host Controller registered new interface driverr815x[ 1.434726471615] usbcore: registered new interface driver cdc_wdmsmsc95xx[ 1.441013477990] usbcore: registered new interface driver usb-storagenet1080[ 1.448135484283] usbcore: registered new interface driver usbserialcdc_subset[ 1.454708490779] usbcore: registered new interface driver usbserial_genericzaurus[ 1.461848] usbserial: USB Serial support registered for generic[ 1.468527497093] usbcore: registered new interface driver ftdi_siocdc_ncm[ 1.474907503937] usbserialehci_hcd: USB Serial support registered for FTDI USB Serial Device2.0 'Enhanced' Host Controller (EHCI) Driver[ 1.487326510886] musbehci-hdrc musbomap: OMAP-hdrc.0.auto: Enabled SW babble controlEHCI Host Controller driver[ 1.494094517235] musb-hdrc musb-hdrc.0.autousbcore: Falied to request rx1.registered new interface driver cdc_wdm[ 1.500314523592] musb-hdrc musb-hdrc.0.autousbcore: musb_init_controller failed with status registered new interface driver usb-517storage[ 1.508785530485] platform musb-hdrc.0.autousbcore: Driver musb-hdrc requests probe deferralregistered new interface driver usbserial[ 1.537087] usbcore: registered new interface driver usbserial_generic[ 1.518940544375] musb-hdrc musb-hdrc.1.autousbserial: Enabled SW babble controlUSB Serial support registered for generic[ 1.525693550984] musbusbcore: registered new interface driver ftdi_sio[ 1.557337] usbserial: USB Serial support registered for FTDI USB Serial Device[ 1.569745] musb-hdrc musb-hdrc.10.auto: Falied to request rx1.Enabled SW babble control[ 1.531905576609] musb-hdrc musb-hdrc.0.auto: Falied to request rx1.[ 1.583022] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517[ 1.540202591267] platform musb-hdrc.10.auto: Driver musb-hdrc requests probe deferral[ 1.569971601463] mousedevmusb-hdrc musb-hdrc.1.auto: PS/2 mouse device common for all miceEnabled SW babble control[ 1.577964608210] input: timusb-hdrc musb-tsc as /devices/ocp.2/44e0d000hdrc.tscadc/TI-am335x-tsc/input/input0[ 1.588798] i2c /dev entries driverauto: Falied to request rx1.[ 1.595735614488] omap_wdtmusb-hdrc musb-hdrc.1.auto: OMAP Watchdog Timer Rev 0x01: initial timeout 60 secmusb_init_controller failed with status -517[ 1.605305622856] edmaplatform musb-dma-engine edma-dma-enginehdrc.1.0auto: allocated channel for 0:25Driver musb-hdrc requests probe deferral[ 1.612714653327] edma-dma-engine edma-dma-engine.0: allocated channel mousedev: PS/2 mouse device common for 0:24all mice[ 1.619977660663] omap_hsmmc 48060000.mmcinput: unable to get vmmc regulator ti-517[ 1tsc as /devices/ocp.626996] edma2/44e0d000.tscadc/TI-dmaam335x-engine edma-dma-enginetsc/input/input0[ 1.0: freeing channel for 24671593] i2c /dev entries driver[ 1.634058678569] edmaomap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec[ 1.688151] edma-dma-engine edma-dma-engine.0: freeing allocated channel for 0:25[ 1.640982695572] platform 48060000edma-dma-engine edma-dma-engine.mmc0: Driver omap_hsmmc requests probe deferralallocated channel for 0:24[ 1.649450702910] ledtrig-cpuomap_hsmmc 48060000.mmc: registered unable to indicate activity on CPUsget vmmc regulator -517[ 1.656349709845] edma-dma-engine edma-dma-engine.0: allocated freeing channel for 0:3624[ 1.663701716920] omapedma-dma-sham 53100000.shamengine edma-dma-engine.0: hw accel on OMAP rev 4.3freeing channel for 25[ 1.671745723910] omap-aes 53500000platform 48060000.aesmmc: OMAP AES hw accel rev: 3.2Driver omap_hsmmc requests probe deferral[ 1.678097732299] edmaledtrig-dma-engine edma-dma-engine.0cpu: allocated channel for 0:5registered to indicate activity on CPUs[ 1.685285739174] edma-dma-engine edma-dma-engine.0: allocated channel for 0:636[ 1.694601746525] usbcoreomap-sham 53100000.sham: registered new interface driver usbhidhw accel on OMAP rev 4.3[ 1.700502754574] usbhidomap-aes 53500000.aes: OMAP AES hw accel rev: USB HID core driver3.2[ 1.708722760718] usbcore: registered new interface driver sndedma-usbdma-audioengine edma-dma-engine.0: allocated channel for 0:5[ 1.718885768028] UDA134X SoC Audio Codecedma-dma-engine edma-dma-engine.0: allocated channel for 0:6[ 1.743837777248] davinci_evm sound.4: uda134x-hifi <-> 48038000.mcasp mapping okusbcore: registered new interface driver usbhid[ 1.757053783237] oprofileusbhid: no performance countersUSB HID core driver[ 1.762324791362] oprofileusbcore: using timer interrupt.registered new interface driver snd-usb-audio[ 1.767382801674] TCP: cubic registeredUDA134X SoC Audio Codec[ 1.770893824052] Initializing XFRM netlink socketdavinci_evm sound.4: uda134x-hifi <-> 48038000.mcasp mapping ok[ 1.775561837299] NEToprofile: Registered protocol family 17no performance counters[ 1.780316842555] NEToprofile: Registered protocol family 15using timer interrupt.[ 1.785106847618] canTCP: controller area network core (rev 20120528 abi 9)cubic registered[ 1.851130] Initializing XFRM netlink socket[ 1.791873855784] NET: Registered protocol family 2917[ 1.796721860546] canNET: raw Registered protocol (rev 20120528)family 15[ 1.801239865336] can: broadcast manager protocol controller area network core (rev 20120528 tabi 9)[ 1.807373872096] 8021qNET: 802.1Q VLAN Support v1.8Registered protocol family 29[ 1.811942876881] Key type dns_resolver registeredcan: raw protocol (rev 20120528)[ 1.817320881397] cpu cpu0can: cpu0 regulator not ready, retrybroadcast manager protocol (rev 20120528 t)[ 1.822835887520] platform cpufreq-cpu0.08021q: Driver cpufreq-cpu0 requests probe deferral[ 1802.8311421Q VLAN Support v1.8[ 1.892100] PM: CM3 Firmware Version = 0x187Key type dns_resolver registered[ 1.836357897496] ThumbEE CPU extension supported.cpu cpu0: cpu0 regulator not ready, retry[ 1.843598903001] omapplatform cpufreq-gpmc 50000000cpu0.gpmc0: GPMC revision 6.0Driver cpufreq-cpu0 requests probe deferral[ 1.849053911300] gpmc_mem_initPM: disabling cs 0 mapped at 0x0-0x1000000CM3 Firmware Version = 0x187[ 1.856959916487] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit), 1024MiB, page size: 2048, OOB size: 64ThumbEE CPU extension supported.[ 1.869691923680] omap2omap-nandgpmc 50000000.gpmc: detected x8 NAND flashGPMC revision 6.0[ 1.874446929131] nandgpmc_mem_init: using OMAP_ECC_BCH8_CODE_HW ECC scheme[ 1.880115] omap2disabling cs 0 mapped at 0x0-nand: using custom ecc layout0x1000000[ 1.896952937019] vrtcNAND device: 1800 mV Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit), 1024MiB, page size: 2048, OOB size: 64[ 1.900445949754] vrtcomap2-nand: supplied by vindetected x8 NAND flash[ 1.907593954499] vionand: 1500 <--> 3300 mV at 1500 mV using OMAP_ECC_BCH8_CODE_HW ECC scheme[ 1.912384960175] vioomap2-nand: supplied by vinusing custom ecc layout[ 1.920058965136] vdd_mpu: 600 <9 cmdlinepart partitions found on MTD device omap2--> 1500 mV at 1137 mV nand.0[ 1.925258971955] vdd_mpuCreating 9 MTD partitions on "omap2-nand.0": supplied by vin[ 1.933197977663] vdd_core0x000000000000-0x000000020000 : 600 <--> 1500 mV at 1137 mV "SPL"[ 1.938357985117] vdd_core0x000000020000-0x000000040000 : supplied by vin"SPL.backup1"[ 1.945845993214] vdd30x000000040000-0x000000060000 : 5000 mV "SPL.backup2"[ 12.952174001160] vdig10x000000060000-0x000000080000 : 1200 <--> 2700 mV at 1800 mV "SPL.backup3"[ 12.957262009145] vdig10x000000080000-0x000000260000 : supplied by vin"u-boot"[ 12.964302018198] vdig20x000000260000-0x000000280000 : 1200 <"u-boot-> 1800 mV at 1800 mV env"[ 12.969266026420] vdig20x000000280000-0x0000002a0000 : supplied by vin"fdt"[ 12.976404033730] vpll0x0000002a0000-0x0000008a0000 : 1800 <--> 2500 mV at 1800 mV "kernel"[ 12.981280046645] vpll0x0000008a0000-0x000040000000 : supplied by vin"rootfs"[ 12.988291910559] vdacvrtc: 1800 <--> 2850 mV at 1800 mV [ 12.993313914394] vdacvrtc: supplied by vin[ 2.000264921442] vaux1vio: 1800 1500 <--> 2850 3300 mV at 1800 1500 mV [ 2.005430926452] vaux1vio: supplied by vin[ 2.012475934061] vaux2vdd_mpu: 1800 600 <--> 2800 1500 mV at 3300 1137 mV [ 2.017557939149] vaux2vdd_mpu: supplied by vin[ 2.025050947000] vaux33vdd_core: 1800 600 <--> 3300 1500 mV at 3300 1137 mV [ 2.030116952150] vaux33vdd_core: supplied by vin[ 2.037272959384] vmmcvdd3: 1800 <-5000 mV [ 2.965617] vdig1: 1200 <--> 3300 2700 mV at 3300 1800 mV [ 2.042150970598] vmmcvdig1: supplied by vin[ 2.060169977702] tps65910vdig2: 1200 <-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0> 1800 mV at 1800 mV [ 2.069590982663] at24 0-0050vdig2: 4096 byte 24c32 EEPROM, writable, 32 bytes/writesupplied by vin[ 2.078885989856] ina2xx 0vpll: 1800 <--0041> 2500 mV at 1800 mV [ 2.994840] vpll: power monitor ina226 (Rshunt = 10000 uOhm)supplied by vin[ 23.085885001759] omap_i2c 44e0b000.i2cvdac: bus 0 rev0.11 1800 <--> 2850 mV at 100 kHz1800 mV [ 23.092282006728] musbvdac: supplied by vin[ 3.013866] vaux1: 1800 <-hdrc musb-hdrc> 2850 mV at 1800 mV [ 3.0.auto018861] vaux1: Enabled SW babble controlsupplied by vin[ 23.101130026421] musbvaux2: 1800 <-hdrc musb-hdrc> 2800 mV at 3300 mV [ 3.0.auto031390] vaux2: MUSB HDRC host driversupplied by vin[ 23.107985038485] musbvaux33: 1800 <-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1> 3300 mV at 3300 mV [ 23.116715043689] usb usb1vaux33: New USB device found, idVendor=1d6b, idProduct=0002supplied by vin[ 23.123969050823] usb usb1vmmc: New USB device strings: Mfr=3, Product=2, SerialNumber=11800 <--> 3300 mV at 3300 mV [ 23.131610055802] usb usb1vmmc: Product: MUSB HDRC host driversupplied by vin[ 23.136889073949] usb usb1tps65910-rtc tps65910-rtc: Manufacturerrtc core: Linux 3.12.10registered tps65910-divelk-2.0.0 musb-hcdrtc as rtc0[ 23.143904083252] usb usb1at24 0-0050: SerialNumber: musb-hdrc.0.auto4096 byte 24c32 EEPROM, writable, 32 bytes/write[ 23.150475092440] hub 1ina2xx 0-00041:1.0: USB hub foundpower monitor ina226 (Rshunt = 10000 uOhm)[ 23.154633099442] hub 1-omap_i2c 44e0b000.i2c: bus 0:1rev0.0: 1 port detected11 at 100 kHz[ 23.160314106054] musb-hdrc musb-hdrc.10.auto: Enabled SW babble control[ 23.169104114825] musb-hdrc musb-hdrc.10.auto: MUSB HDRC host driver[ 23.175903121563] musb-hdrc musb-hdrc.10.auto: new USB bus registered, assigned bus number 21[ 23.184622130296] usb usb2usb1: New USB device found, idVendor=1d6b, idProduct=0002[ 23.191804137543] usb usb2usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 23.199538145203] usb usb2usb1: Product: MUSB HDRC host driver[ 23.204843150459] usb usb2usb1: Manufacturer: Linux 3.12.10-divelk-2.0.0 musb-hcd[ 23.211835157470] usb usb2usb1: SerialNumber: musb-hdrc.10.auto[ 23.218485164033] hub 21-0:1.0: USB hub found[ 23.222656168106] hub 21-0:1.0: 1 port detected[ 23.228149173859] edmamusb-dmahdrc musb-engine edma-dma-enginehdrc.1.0auto: allocated channel for 0:25Enabled SW babble control[ 23.235556182507] edmamusb-dmahdrc musb-engine edma-dma-enginehdrc.0: allocated channel for 0:24[ 2.331112] mmc0: host does not support reading read-only switch. assuming write-enable.[ 2.341865] mmc0: new high 1.auto: MUSB HDRC host driver[ 3.189383] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2[ 3.198116] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002[ 3.205382] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 3.213083] usb usb2: Product: MUSB HDRC host driver[ 3.218342] usb usb2: Manufacturer: Linux 3.12.10-divelk-2.0.0 musb-hcd[ 3.225358] usb usb2: SerialNumber: musb-hdrc.1.auto[ 3.231979] hub 2-0:1.0: USB hub found[ 3.236124] hub 2-0:1.0: 1 port detected[ 3.241593] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25[ 3.248906] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24[ 3.341278] mmc0: host does not support reading read-only switch. assuming write-enable.[ 3.352042] mmc0: new high speed SDHC card at address 1234[ 23.348752358955] mmcblk0: mmc0:1234 SA16G 14.6 GiB [ 23.353583363802] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6[ 23.360031370249] davinci_mdio 4a101000.mdio: detected phy mask ffffffbf[ 23.368787379000] libphy: 4a101000.mdio: probed[ 23.373191383422] davinci_mdio 4a101000.mdio: phy[6]: device 4a101000.mdio:06, driver SMSC LAN8710/LAN8720[ 23.383063393289] mmcblk0: p1 p2[ 23.388144398432] Detected MACID = 00:50:c2:1e:af:e0[ 23.399693409822] tps65910-rtc tps65910-rtc: setting system clock to 2014-10-03 10:2836:25 29 UTC (14123321051412332589)[ 23.415107425312] ALSA device list:[ 23.418279428505] #0: Diva Dacu[ 23.430401440728] kjournald starting. Commit interval 5 seconds[ 23.451373461578] EXT3-fs (mmcblk0p2): using internal journal[ 23.456953467158] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode[ 23.464341474540] VFS: Mounted root (ext3 filesystem) on device 179:2.[ 23.473728483932] devtmpfs: mounted[ 23.477436487639] Freeing unused kernel memory: 368K (c085c000 - c08b8000)

[ 34.372834382357] udevd[898954]: starting version 182[ 79.828921887444] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.[ 9 10.688192144522] cryptodev: driver 1.6 loaded.

Configuring network interfaces... [ 1213.886710122234] net eth0: initializing cpsw version 1.12 (0)[ 1213.894834130330] net eth0: phy found : id is : 0x7c0f1[ 1213.909136144609] 8021q: adding VLAN 0 to HW filter on device eth0

[ 1716.053192362961] libphy: 4a101000.mdio:06 - Link is Up - 100/Full