Changes

[ 0.000000] Linux version 3.12.10-divelk-2.0.0 (amon@precisebakerylinuxserver2) (gcc version 4.7.3 20130226 (prerelease) (crosstool-NG linaro-1.13.1-4.7-2013.03-20130313420130313 - Linaro GCC 2013.03) ) #26 SMP Sat Sep 13 10:45:59 CEST 2014

[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0d90000 c0d9a000 s9024 r8192 d15552 u32768

[ 0.000000] Memory: 482228K482188K/521216K available (6358K kernel code, 562K rwdata, 2132K 2168K rodata, 368K init, 254K bss, 38988K 39028K reserved, 0K highmem)

[ 0.000000] .text : 0xc0008000 - 0xc0852f9c 0xc085bf9c (8492 8528 kB)[ 0.000000] .init : 0xc0853000 0xc085c000 - 0xc08af340 0xc08b8340 ( 369 kB)[ 0.000000] .data : 0xc08b0000 0xc08ba000 - 0xc093c8b0 0xc09468b0 ( 563 kB)[ 0.000000] .bss : 0xc093c8b8 0xc09468b8 - 0xc097c3f4 0xc09863f4 ( 255 kB)

[ 0.000408000405] Calibrating delay loop... 479.23 BogoMIPS (lpj=2396160)[ 0.119676119684] pid_max: default: 32768 minimum: 301[ 0.119841119839] Security Framework initialized[ 0.119963119961] Mount-cache hash table entries: 512[ 0.131798131807] CPU: Testing write buffer coherency: ok[ 0.132314132332] CPU0: thread -1, cpu 0, socket -1, mpidr 0[ 0.132392132408] Setting up static identity map for 0xc063b588 0xc063b648 - 0xc063b5f80xc063b6b8[ 0.136894137485] Brought up 1 CPUs[ 0.136919137511] SMP: Total of 1 processors activated.[ 0.136930137522] CPU: All CPU(s) started in SVC mode.[ 0.137967138562] devtmpfs: initialized[ 0.142914143500] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3[ 0.208918209514] omap_hwmod: debugss: _wait_target_disable failed[ 0.209947210503] pinctrl core: initialized pinctrl subsystem[ 0.211220211769] regulator-dummy: no parameters[ 0.214096214592] NET: Registered protocol family 16[ 0.217171217656] DMA: preallocated 256 KiB pool for atomic coherent allocations[ 0.220893221356] cpuidle: using governor ladder[ 0.220917221379] cpuidle: using governor menu[ 0.230145230598] platform mpu.1: FIXME: clock-name 'fck' DOES NOT exist in dt![ 0.231749232257] platform 49000000.edma: FIXME: clock-name 'fck' DOES NOT exist in dt![ 0.233548234050] OMAP GPIO hardware version 0.1[ 0.247007247603] omap-gpmc 50000000.gpmc: could not find pctldev for node /pinmux@44e10800/nandflash_pins_default, deferring probe[ 0.247053247645] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral[ 0.247657248269] platform 56000000.sgx: FIXME: clock-name 'fck' DOES NOT exist in dt![ 0.252172252788] DSS not supported on this SoC[ 0.252201252816] No ATAGs?[ 0.252215252829] hw-breakpoint: debug architecture 0x4 unsupported.[ 0.295294295867] bio: create slab <bio-0> at 0[ 0.318367319063] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver[ 0.319554320906] vin: 5000 mV [ 0.322895323602] SCSI subsystem initialized[ 0.324859325575] usbcore: registered new interface driver usbfs[ 0.325128325838] usbcore: registered new interface driver hub[ 0.325440326152] usbcore: registered new device driver usb[ 0.326575327258] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe[ 0.326611327292] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral[ 0.327130327812] pps_core: LinuxPPS API ver. 1 registered[ 0.327145327827] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.327340328025] PTP clock support registered[ 0.329452330806] Advanced Linux Sound Architecture Driver Initialized.[ 0.331853332504] Switched to clocksource timer1[ 0.362362363046] NET: Registered protocol family 2[ 0.363224363902] TCP established hash table entries: 4096 (order: 3, 32768 bytes)[ 0.363324364002] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)[ 0.363407364086] TCP: Hash tables configured (established 4096 bind 4096)[ 0.363488364165] TCP: reno registered[ 0.363508364185] UDP hash table entries: 256 (order: 1, 8192 bytes)[ 0.363537364213] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)[ 0.363821364496] NET: Registered protocol family 1[ 0.364320365004] RPC: Registered named UNIX socket transport module.[ 0.364335365020] RPC: Registered udp transport module.[ 0.364345365030] RPC: Registered tcp transport module.[ 0.364354365039] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.365523366220] NetWinder Floating Point Emulator V0.97 (double precision)[ 0.366315367011] PM: Loading am335x-pm-firmware.bin[ 0.528683529337] VFS: Disk quotas dquot_6.5.2[ 0.528875529528] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 0.529857530515] NFS: Registering the id_resolver key type[ 0.529963530615] Key type id_resolver registered[ 0.529976530627] Key type id_legacy registered[ 0.530363530999] NTFS driver 2.1.30 [Flags: R/W].[ 0.530414531052] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.[ 0.530644531276] msgmni has been set to 989[ 0.533859534486] NET: Registered protocol family 38[ 0.533934534558] io scheduler noop registered[ 0.533947534571] io scheduler deadline registered[ 0.533985534609] io scheduler cfq registered (default)[ 0.536601537228] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568[ 0.589162589511] Console: switching to colour frame buffer device 100x30[ 0.596808597265] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled[ 0.600343600799] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0[ 1.258836259200] console [ttyO0] enabled[ 1.264550264920] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20[ 1.288289288707] brd: module loaded[ 1.300363300807] loop: module loaded[ 1.310911311398] mtdoops: mtd device (mtddev=name/number) must be supplied[ 1.320838321358] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17[ 1.328468328988] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16[ 1.336501337003] m25p80 spi1.0: s25fl256s1 (32768 Kbytes)[ 1.345589346095] CAN device driver interface[ 1.351555352053] c_can_platform 481cc000.d_can: c_can_platform device registered (regs=fa1cc000, irq=68)[ 1.362901363406] usbcore: registered new interface driver asix[ 1.368933369447] usbcore: registered new interface driver ax88179_178a[ 1.375940376425] usbcore: registered new interface driver cdc_ether[ 1.382571383027] usbcore: registered new interface driver r815x[ 1.388647389097] usbcore: registered new interface driver smsc95xx[ 1.395037395481] usbcore: registered new interface driver net1080[ 1.401302401742] usbcore: registered new interface driver cdc_subset[ 1.407851408288] usbcore: registered new interface driver zaurus[ 1.414214414649] usbcore: registered new interface driver cdc_ncm[ 1.420940421352] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 1.428004428418] ehci-omap: OMAP-EHCI Host Controller driver[ 1.434326434726] usbcore: registered new interface driver cdc_wdm[ 1.440611441013] usbcore: registered new interface driver usb-storage[ 1.447721448135] usbcore: registered new interface driver usbserial[ 1.454279454708] usbcore: registered new interface driver usbserial_generic[ 1.461429461848] usbserial: USB Serial support registered for generic[ 1.468115468527] usbcore: registered new interface driver ftdi_sio[ 1.474499474907] usbserial: USB Serial support registered for FTDI USB Serial Device[ 1.486939487326] musb-hdrc musb-hdrc.0.auto: Enabled SW babble control[ 1.493709494094] musb-hdrc musb-hdrc.0.auto: Falied to request rx1.[ 1.499930500314] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517[ 1.508397508785] platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral[ 1.518536518940] musb-hdrc musb-hdrc.1.auto: Enabled SW babble control[ 1.525265525693] musb-hdrc musb-hdrc.1.auto: Falied to request rx1.[ 1.531476531905] musb-hdrc musb-hdrc.1.auto: musb_init_controller failed with status -517[ 1.539777540202] platform musb-hdrc.1.auto: Driver musb-hdrc requests probe deferral[ 1.569482569971] mousedev: PS/2 mouse device common for all mice[ 1.577460577964] input: ti-tsc as /devices/ocp.2/44e0d000.tscadc/TI-am335x-tsc/input/input0[ 1.588293588798] i2c /dev entries driver[ 1.595262595735] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec[ 1.604812605305] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25[ 1.612233612714] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24[ 1.619492619977] omap_hsmmc 48060000.mmc: unable to get vmmc regulator -517[ 1.626507626996] edma-dma-engine edma-dma-engine.0: freeing channel for 24[ 1.633576634058] edma-dma-engine edma-dma-engine.0: freeing channel for 25[ 1.640496640982] platform 48060000.mmc: Driver omap_hsmmc requests probe deferral[ 1.648977649450] ledtrig-cpu: registered to indicate activity on CPUs[ 1.655875656349] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36[ 1.663223663701] omap-sham 53100000.sham: hw accel on OMAP rev 4.3[ 1.671212671745] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2[ 1.677557678097] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5[ 1.684743685285] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6[ 1.694019694601] usbcore: registered new interface driver usbhid[ 1.699921700502] usbhid: USB HID core driver[ 1.708135708722] usbcore: registered new interface driver snd-usb-audio[ 1.718287718885] UDA134X SoC Audio Codec[ 1.743152743837] davinci_evm sound.4: uda134x-hifi <-> 48038000.mcasp mapping ok[ 1.756354757053] oprofile: no performance counters[ 1.761605762324] oprofile: using timer interrupt.[ 1.766655767382] TCP: cubic registered[ 1.770167770893] Initializing XFRM netlink socket[ 1.774827775561] NET: Registered protocol family 17[ 1.779585780316] NET: Registered protocol family 15[ 1.784379785106] can: controller area network core (rev 20120528 abi 9)[ 1.791142791873] NET: Registered protocol family 29[ 1.795988796721] can: raw protocol (rev 20120528)[ 1.800505801239] can: broadcast manager protocol (rev 20120528 t)[ 1.806638807373] 8021q: 802.1Q VLAN Support v1.8[ 1.811186811942] Key type dns_resolver registered[ 1.816559817320] cpu cpu0: cpu0 regulator not ready, retry[ 1.822074822835] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral[ 1.830373831142] PM: CM3 Firmware Version = 0x187[ 1.835589836357] ThumbEE CPU extension supported.[ 1.842812843598] omap-gpmc 50000000.gpmc: GPMC revision 6.0[ 1.848270849053] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000[ 1.856188856959] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit), 1024MiB, page size: 2048, OOB size: 64[ 1.868917869691] omap2-nand: detected x8 NAND flash[ 1.873664874446] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme[ 1.879331880115] omap2-nand: using custom ecc layout[ 1.896110896952] vrtc: 1800 mV [ 1.899609900445] vrtc: supplied by vin[ 1.906747907593] vio: 1500 <--> 3300 mV at 1500 mV [ 1.911541912384] vio: supplied by vin[ 1.919203920058] vdd_mpu: 600 <--> 1500 mV at 1137 mV [ 1.924407925258] vdd_mpu: supplied by vin[ 1.932311933197] vdd_core: 600 <--> 1500 mV at 1137 mV [ 1.937468938357] vdd_core: supplied by vin[ 1.945037945845] vdd3: 5000 mV [ 1.951292952174] vdig1: 1200 <--> 2700 mV at 1800 mV [ 1.956361957262] vdig1: supplied by vin[ 1.963625964302] vdig2: 1200 <--> 1800 mV at 1800 mV [ 1.968589969266] vdig2: supplied by vin[ 1.975718976404] vpll: 1800 <--> 2500 mV at 1800 mV [ 1.980588981280] vpll: supplied by vin[ 1.987598988291] vdac: 1800 <--> 2850 mV at 1800 mV [ 1.992623993313] vdac: supplied by vin[ 12.999551000264] vaux1: 1800 <--> 2850 mV at 1800 mV [ 2.004705005430] vaux1: supplied by vin[ 2.011760012475] vaux2: 1800 <--> 2800 mV at 3300 mV [ 2.016834017557] vaux2: supplied by vin[ 2.024243025050] vaux33: 1800 <--> 3300 mV at 3300 mV [ 2.029306030116] vaux33: supplied by vin[ 2.036490037272] vmmc: 1800 <--> 3300 mV at 3300 mV [ 2.041363042150] vmmc: supplied by vin[ 2.059344060169] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0[ 2.068776069590] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write[ 2.078097078885] ina2xx 0-0041: power monitor ina226 (Rshunt = 10000 uOhm)[ 2.085105085885] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 100 kHz[ 2.091503092282] musb-hdrc musb-hdrc.0.auto: Enabled SW babble control[ 2.100364101130] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver[ 2.107205107985] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1[ 2.115934116715] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002[ 2.123182123969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.130819131610] usb usb1: Product: MUSB HDRC host driver[ 2.136096136889] usb usb1: Manufacturer: Linux 3.12.10-divelk-2.0.0 musb-hcd[ 2.143106143904] usb usb1: SerialNumber: musb-hdrc.0.auto[ 2.149684150475] hub 1-0:1.0: USB hub found[ 2.153843154633] hub 1-0:1.0: 1 port detected[ 2.159541160314] musb-hdrc musb-hdrc.1.auto: Enabled SW babble control[ 2.168321169104] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver[ 2.175115175903] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2[ 2.183825184622] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002[ 2.191008191804] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.198743199538] usb usb2: Product: MUSB HDRC host driver[ 2.204046204843] usb usb2: Manufacturer: Linux 3.12.10-divelk-2.0.0 musb-hcd[ 2.211039211835] usb usb2: SerialNumber: musb-hdrc.1.auto[ 2.217694218485] hub 2-0:1.0: USB hub found[ 2.221754222656] hub 2-0:1.0: 1 port detected[ 2.227338228149] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25[ 2.234730235556] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24[ 2.330489331112] mmc0: host does not support reading read-only switch. assuming write-enable.[ 2.341247341865] mmc0: new high speed SDHC card at address 1234[ 2.348117348752] mmcblk0: mmc0:1234 SA16G 14.6 GiB [ 2.352947353583] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6[ 2.359394360031] davinci_mdio 4a101000.mdio: detected phy mask ffffffbf[ 2.368185368787] libphy: 4a101000.mdio: probed[ 2.372586373191] davinci_mdio 4a101000.mdio: phy[6]: device 4a101000.mdio:06, driver SMSC LAN8710/LAN8720[ 2.382465383063] mmcblk0: p1 p2[ 2.387522388144] Detected MACID = 00:50:c2:1e:af:e0[ 2.399089399693] tps65910-rtc tps65910-rtc: setting system clock to 2014-10-03 10:2028:11 25 UTC (14123316111412332105)[ 2.414535415107] ALSA device list:[ 2.417708418279] #0: Diva Dacu[ 2.429920430401] kjournald starting. Commit interval 5 seconds[ 2.450831451373] EXT3-fs (mmcblk0p2): using internal journal[ 2.456409456953] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode[ 2.463803464341] VFS: Mounted root (ext3 filesystem) on device 179:2.[ 2.473231473728] devtmpfs: mounted[ 2.476938477436] Freeing unused kernel memory: 368K (c0853000 c085c000 - c08af000c08b8000)

[ 3.372057372834] udevd[898]: starting version 182[ 7.984695828921] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.[ 9.957065688192] cryptodev: driver 1.6 loaded.

Configuring network interfaces... [ 1312.202281886710] net eth0: initializing cpsw version 1.12 (0)[ 1312.210138894834] net eth0: phy found : id is : 0x7c0f1[ 1312.224268909136] 8021q: adding VLAN 0 to HW filter on device eth0

[ 17.362590053192] libphy: 4a101000.mdio:06 - Link is Up - 100/Full