3,260
edits
Changes
→Power consumption
* PWRHOLD (input): This signal is connected to processor's PMIC_PWR_EN and is used to initiate power up sequence.
* PMIC_PWRON (input): A rising edge of this pin (automatically done at startup) the PMIC performs an OFF-to-ACTIVE state transition. On a falling edge of this pin, the PMIC performs an ACTIVE-to-OFF state transition. This signal is pulled-up to VIN through 10kOhm resistor.
== Reset scheme and voltage monitoring ==
Diva implements a flexible reset scheme that offers several different solutions for system integrators at carrier board level. The following picture shows a diagram of the reset scheme:
