Changes

NAON#run net_nfs No "cpsw" environment variable found. Using both ports ('setenv cpsw [0|1]' to force port usage)Trying port: 6Auto negotiation failedNo "cpsw" environment variable found. Using both ports ('setenv cpsw [0|1]' to force port usage)Trying port: 1Auto negotiation DONE!link up on port 01, speed 100, full duplex

TFTP from server 192.168.0.121; our IP address is 192.168.0.122123

Loading: T #################################################################

################################################################# ###############################

Bytes transferred = 2688116 3153616 (290474 301ed0 hex)

Image Name: Linux-2.6.37-naon-4.0.2.0+

Data Size: 2688052 3153552 Bytes = 2.6 3 MiB

[ 0.000000] Linux version 2.6.37-naon-4.0.2.0 + (nelk@nelk-desktop) (gcc version 4.3.3 (Sourcery G++ Lite 2009q122009q1-203) ) #1 Mon Apr 22 11:50:30 CEST 2013

[ 0.000000] OMAP chip is TI8148 2.01[ 0.000000] SRAM: Mapped pa 0x40300000 0x402f1000 to va 0xfe400000 size: 0x200000xf000[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3292832672[ 0.000000] Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.121:/home/shared/devel/dave/naon-DAA/sw/linux/sdk/rfs/nelk panic=5 rootdelay=5 ip=192.168.0.123:192.168.0.121:192.0[ 0.000000] PID hash table entries: 1024 512 (order: 0-1, 4096 2048 bytes)[ 0.000000] Dentry cache hash table entries: 32768 16384 (order: 54, 131072 65536 bytes)[ 0.000000] Inode-cache hash table entries: 16384 8192 (order: 43, 65536 32768 bytes)[ 0.000000] Memory: 130MB 128MB 1MB = 130MB 129MB total[ 0.000000] Memory: 125748k123872k/125748k 123872k available, 54476k 56352k reserved, 0K highmem

[ 0.000000] .init : 0xc0008000 - 0xc003b000 0xc0035000 ( 204 180 kB)[ 0.000000] .text : 0xc003b000 0xc0035000 - 0xc0514000 0xc05f3000 (4964 5880 kB)[ 0.000000] .data : 0xc0514000 0xc05f4000 - 0xc05535a0 0xc063ee40 ( 254 300 kB)

[ 0.260000] TI81XX: Map 0x8af00000 to 0xfe500000 for dram barrier[ 0.270000] TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier[ 0.280000] omap_voltage_early_init: voltage driver support not added[ 0.280000] regulator: core version 0.5[ 0.270000290000] regulator: dummy: [ 0.270000290000] NET: Registered protocol family 16[ 0.280000290000] omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting![ 0.300000] omap_voltage_add_dev: VDD specified does not exist![ 0.310000] OMAP GPIO hardware version 0.1[ 0.280000310000] OMAP GPIO hardware version 0.1[ 0.280000320000] OMAP GPIO hardware version 0.1[ 0.290000320000] OMAP GPIO hardware version 0.1[ 0.300000330000] registered ti814x_vpss deviceclk get on i2c3 fck failed[ 0.300000340000] registered TI814x on-chip HDMI deviceCannot clk_get ck_32[ 0.310000340000] Debugfs: Only enabling/disabling deep sleep and wakeup timer is supported now[ 0.330000350000] bio: create slab <bio-0> at 0registered ti81xx_vpss device[ 0.330000360000] SCSI subsystem initializedregistered ti81xx_vidout device[ 0.340000360000] usbcore: registered new interface driver usbfsti81xx on-chip HDMI device[ 0.340000360000] usbcore: registered new interface driver hubti81xx_fb device[ 0.350000370000] usbcore: registered new ti81xx_vin device driver usb[ 0.350000380000] registerd cppibio: create slab <bio-dma Intr @ IRQ 170> at 0[ 0.360000390000] Cppi41 Init DoneSCSI subsystem initialized[ 0.360000390000] omap_i2c omap_i2c.1usbcore: bus 1 rev4.0 at 100 kHzregistered new interface driver usbfs[ 0.370000400000] regulatorusbcore: VRTC: 1800 mV registered new interface driver hub[ 0.370000400000] regulatorusbcore: VIO: 1500 mV registered new device driver usb[ 0.380000410000] regulator: VDD1: 600 <--> 1500 mV at 1200 mV USBSS revision 4ea2080b[ 0.390000410000] regulator: VDD2: 600 <registerd cppi--> 1500 mV at 1200 mV dma Intr @ IRQ 17[ 0.400000420000] regulator: VDDCTRL: 600 <--> 1400 mV at 1200 mV Cppi41 Init Done[ 0.400000420000] regulatoromap_i2c omap_i2c.1: LDO1: 1100 <--> 3300 mV bus 1 rev4.0 at 1800 mV 100 kHz[ 0.410000430000] regulator: LDO2VRTC: 1100 <--> 3300 mV at 1800 mV [ 0.420000440000] regulator: LDO3VIO: 1100 <--> 3300 mV at 3300 1500 mV [ 0.420000440000] regulator: LDO4VDD1: 1100 600 <--> 3300 1500 mV at 1800 1200 mV [ 0.430000450000] regulator: LDO5VDD2: 1100 600 <--> 3300 1500 mV at 3300 1200 mV [ 0.440000460000] regulator: LDO6VDDCTRL: 1100 600 <--> 3300 1400 mV at 3300 1200 mV [ 0.450000460000] regulator: LDO7LDO1: 1100 <--> 3300 mV at 3300 1800 mV [ 0.450000470000] regulator: LDO8LDO2: 1100 <--> 3300 mV at 1800 mV [ 0.460000] tps65910 1-002d: No interrupt support, no core IRQ[ 0.470000480000] regulator: tps62353LDO3: 750 1100 <--> 1537 3300 mV at 1200 3300 mV [ 0.470000490000] omap_i2c omap_i2c.3regulator: LDO4: bus 3 rev4.0 1100 <--> 3300 mV at 100 kHz1800 mV [ 0.500000490000] omap_i2c omap_i2c.4regulator: LDO5: bus 4 rev4.0 1100 <--> 3300 mV at 100 kHz3300 mV [ 0.500000] Advanced Linux Sound Architecture Driver Version 1.0.23.regulator: LDO6: 1100 <--> 3300 mV at 3300 mV [ 0.510000] Switching to clocksource gp timerregulator: LDO7: 1100 <--> 3300 mV at 3300 mV [ 0.520000510000] musb-hdrcregulator: version 6.0, host, debug=0LDO8: 1100 <--> 3300 mV at 1800 mV [ 0.520000] musbtps65910 1-hdrc musb-hdrc.0002d: dma type: dma-cppi41No interrupt support, no core IRQ[ 0.530000] musbregulator: tps62353: 750 <-hdrc musb-hdrc.0: MUSB HDRC host driver> 1537 mV at 1200 mV [ 0.530000550000] musb-hdrc musb-hdrcomap_i2c omap_i2c.3: bus 3 rev4.0: new USB bus registered, assigned bus number 1at 100 kHz[ 0.540000570000] usb usb1omap_i2c omap_i2c.4: New USB device found, idVendor=1d6b, idProduct=0002bus 4 rev4.0 at 100 kHz[ 0.570000] Advanced Linux Sound Architecture Driver Version 1.0.23.[ 0.550000580000] usb usb1Bluetooth: New USB device strings: Mfr=3, Product=2, SerialNumber=1Core ver 2.15[ 0.560000580000] usb usb1NET: Product: MUSB HDRC host driverRegistered protocol family 31[ 0.560000590000] usb usb1Bluetooth: Manufacturer: Linux 2.6.37-naon-0.2.0 musb-hcdHCI device and connection manager initialized[ 0.570000590000] usb usb1Bluetooth: SerialNumber: musb-hdrc.0HCI socket layer initialized[ 0.570000600000] hub 1-0:1.0: USB hub foundcfg80211: Calling CRDA to update world regulatory domain[ 0.580000610000] hub 1-0:1.0: 1 port detectedSwitching to clocksource gp timer[ 0.580000620000] musb-hdrc musb-hdrc: version 6.0: USB Host mode controller at cb81e000 using DMA, IRQ 18otg (peripheral+host), debug=0[ 0.590000630000] musb-hdrc musb-hdrc.10: dma type: dma-cppi41[ 0.600000630000] musbMUSB controller-hdrc musb-hdrc.1: MUSB HDRC host driver0 revision 4ea20800[ 0.600000640000] musb-hdrc musb-hdrc.1usb2phy: new USB bus registered, assigned bus number 2computed values rxcalib(15)DACs(30 16 15)[ 0.610000640000] usb usb2usb2phy: New USB device found, idVendor=1d6b, idProduct=0002override computed values rxcalib(15)DACs(30 16 15)[ 0.620000650000] usb usb2usb2phy_config: New USB device strings: Mfr=3musb(0) rxcalib done, Product=2, SerialNumber=1[ rxcalib read value 6f6f617e[ 0.630000660000] usb usb2musb-hdrc musb-hdrc.0: Product: MUSB HDRC host driverUSB Peripheral mode controller at cb81e000 using DMA, IRQ 18[ 0.630000670000] usb usb2musb-hdrc musb-hdrc.1: Manufacturerdma type: Linux 2.6.37-naondma-cppi41[ 0.2.0 musb670000] MUSB controller-hcd1 revision 4ea20800[ 0.640000680000] usb usb2usb2phy: SerialNumber: musb-hdrc.1computed values rxcalib(15)DACs(27 15 13)[ 0.640000680000] hub 2-0usb2phy:1.0: USB hub foundoverride computed values rxcalib(15)DACs(27 15 13)[ 0.650000690000] hub 2-0usb2phy_config:musb(1.0: 1 port detected) rxcalib done, rxcalib read value 6f6ddf6e[ 0.650000700000] musb-hdrc musb-hdrc.1: USB Host mode controller at cb828800 using DMA, IRQ 19MUSB HDRC host driver[ 0.660000710000] NETmusb-hdrc musb-hdrc.1: Registered protocol family 2new USB bus registered, assigned bus number 1[ 0.670000710000] IP route cache hash table entriesusb usb1: 2048 (order: 1New USB device found, idVendor=1d6b, 8192 bytes)idProduct=0002[ 0.670000720000] TCP established hash table entriesusb usb1: 8192 (orderNew USB device strings: 4Mfr=3, Product=2, 65536 bytes)SerialNumber=1[ 0.680000730000] TCP bind hash table entriesusb usb1: 8192 (orderProduct: 3, 32768 bytes)MUSB HDRC host driver[ 0.690000730000] TCPusb usb1: Manufacturer: Hash tables configured (established 8192 bind 8192)[ 0Linux 2.6.37-naon-4.690000] TCP reno registered[ 0.700000] UDP hash table entries: 256 (order: 0, 4096 bytes)+ musb-hcd[ 0.700000740000] UDP-Lite hash table entriesusb usb1: 256 (orderSerialNumber: 0, 4096 bytes)musb-hdrc.1[ 0.710000750000] NEThub 1-0: Registered protocol family 1.0: USB hub found[ 0.720000750000] RPChub 1-0: Registered udp transport module1.[ 0.720000] RPC: Registered tcp transport module.1 port detected[ 0.730000750000] RPCmusb-hdrc musb-hdrc.1: USB Host mode controller at cb828800 using DMA, IRQ 19[ 0.760000] NET: Registered tcp NFSv4.1 backchannel transport module.protocol family 2[ 0.730000770000] NetWinder Floating Point Emulator V0.97 IP route cache hash table entries: 1024 (double precisionorder: 0, 4096 bytes)[ 0.740000770000] PMUTCP established hash table entries: 4096 (order: registered new PMU device of type 0[ 3, 32768 bytes)[ 0.750000780000] omap-iommu omap-iommu.0TCP bind hash table entries: 4096 (order: ducati registered2, 16384 bytes)[ 0.750000790000] omap-iommu omap-iommu.1: sys registeredTCP: Hash tables configured (established 4096 bind 4096)[ 0.890000800000] squashfs: version 4.0 (2009/01/31) Phillip LougherTCP reno registered[ 0.900000800000] JFFS2 version 2.2. UDP hash table entries: 256 (NANDorder: 0, 4096 bytes) © 2001-2006 Red Hat, Inc.[ 0.910000810000] msgmni has been set to 245UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)[ 0.910000810000] io scheduler noop registeredNET: Registered protocol family 1[ 0.910000820000] io scheduler deadline registeredRPC: Registered udp transport module.[ 0.920000820000] io scheduler cfq registered (default)RPC: Registered tcp transport module.[ 0.920000830000] SerialRPC: 8250/16550 driver, 4 ports, IRQ sharing enabledRegistered tcp NFSv4.1 backchannel transport module.[ 0.930000830000] omap_uartNetWinder Floating Point Emulator V0.0: ttyO0 at MMIO 0x48020000 97 (irq = 72double precision) is a OMAP UART0[ 0.940000840000] console PMU: registered new PMU device of type 0[ttyO0] enabled, bootconsole disabled 0.850000] Naon Custom Power Management registered[ 0.940000850000] console [ttyO0] enabled, bootconsole disabledomap-iommu omap-iommu.0: ducati registered[ 0.950000860000] omap_uart.1omap-iommu omap-iommu.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1sys registered[ 01.960000020000] omap_uartsquashfs: version 4.2: ttyO2 at MMIO 0x48024000 0 (irq = 742009/01/31) is a OMAP UART2Phillip Lougher[ 01.970000020000] omap_uartJFFS2 version 2.2.3: ttyO3 at MMIO 0x481a6000 (irq = 44NAND) is a OMAP UART3�© 2001-2006 Red Hat, Inc.[ 01.970000030000] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4msgmni has been set to 241[ 01.980000040000] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5io scheduler noop registered[ 1.000000040000] brd: module loadedio scheduler deadline registered[ 1.000000040000] loop: module loaded[ 1.010000] at24 4-0051: 4096 byte 24c32 EEPROM (writableio scheduler cfq registered (default)[ 1.010000050000] ahci ahci.0Serial: forcing PORTS_IMPL to 0x18250/16550 driver, 4 ports, IRQ sharing enabled[ 1.020000060000] ahci ahciomap_uart.0: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform modettyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0[ 1.030000060000] console [ttyO0] ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst enabled, bootconsole disabled[ 1.040000060000] scsi0 : ahci_platformconsole [ttyO0] enabled, bootconsole disabled[ 1.040000080000] ata1omap_uart.1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x100 ttyO1 at MMIO 0x48022000 (irq 16= 73) is a OMAP UART1[ 1.050000080000] mtd_dataflash spi1omap_uart.02: at45db642d ttyO2 at MMIO 0x48024000 (8192 KBytesirq = 74) pagesize 1024 bytes, OTPis a OMAP UART2[ 1.060000090000] Creating 6 MTD partitions on "spi_flash":[ 1omap_uart.060000] 0x000000000000-0x000000020000 3: "SPI u-boot 1st"ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3[ 1.070000100000] 0x000000020000-0x000000040000 omap_uart.4: "SPI u-boot 2nd"ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4[ 1.080000110000] 0x000000040000-0x000000050000 omap_uart.5: "SPI u-boot env1"ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5[ 1.080000120000] 0x000000050000-0x000000060000 brd: "SPI u-boot env2"module loaded[ 1.090000130000] 0x000000060000-0x000000360000 loop: "SPI Linux Kernel"module loaded[ 1.100000130000] usb 2at24 4-10051: new high speed USB device using musb-hdrc and address 24096 byte 24c32 EEPROM (writable)[ 1.110000140000] 0x000000360000-0x000000800000 m25p80 spi1.0: "SPI Free Space"unrecognized JEDEC id 1f2800[ 1.110000150000] omap2-nand driver initializing[ 1.120000] ONFI flash detected[ 1.120000] ONFI param page 0 valid[ 1.130000150000] NAND device: Manufacturer ID: 0x2c0xec, Chip ID: 0xd3 (Micron NAND 1GiB 3,3V 8-bitSamsung )[ 1.130000160000] Creating 7 MTD partitions on "omap2-nand.0":[ 1.140000160000] 0x000000000000-0x000000040000 0x000000020000 : "NAND U-Boot-min"[ 1.150000170000] 0x0000000400000x000000020000-0x000000080000 0x000000060000 : "NAND U-Boot"[ 1.150000180000] 0x000000060000-0x000000080000-0x0000000c0000 : "NAND U-Boot Env1"[ 1.160000190000] 0x0000000c00000x000000080000-0x000000100000 0x0000000a0000 : "NAND U-Boot Env2"[ 1.170000190000] 0x0000001000000x0000000a0000-0x000000380000 0x0000004a0000 : "NAND Kernel"[ 1.180000200000] 0x0000003800000x0000004a0000-0x000008280000 0x000008000000 : "NAND File System (small)"[ 1.210000340000] 0x0000082800000x000008000000-0x000040000000 : "NAND File System (big)"[ 12.430000340000] usb 2-davinci_mdio davinci_mdio.0: davinci mdio revision 1: New USB device found, idVendor=0424, idProduct=2512.6[ 2.340000] davinci_mdio davinci_mdio.0: detected phy mask ffffffbd[ 12.430000350000] davinci_mdio.0: probed[ 2.350000] davinci_mdio davinci_mdio.0: phy[1] usb 2-1: New USB device strings0: Mfr=001, Product=0, SerialNumber=0driver Marvell 88E1111[ 12.440000360000] hub 2-1:1davinci_mdio davinci_mdio.0: USB hub foundphy[ 1.4400006] hub 2-1:1.device 0: 2 ports detected06, driver SMSC LAN8710/LAN8720[ 12.460000370000] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6CAN device driver interface[ 12.460000370000] davinci_mdio davinci_mdioCAN bus driver for Bosch D_CAN controller 1.0: detected phy mask ffffffbd[ 12.470000380000] davinci_mdio.0d_can d_can: probedd_can device registered (irq=52, irq_obj=53)[ 12.470000] davinci_mdio davinci_mdio.0: phy[1390000]tun: Universal TUN/TAP device 0:01driver, driver Marvell 88E11111.6[ 12.480000390000] davinci_mdio davinci_mdiotun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.0: phy[6]: device 0:06, driver SMSC LAN8710/LAN8720com>[ 12.490000400000] usbcore: registered new interface driver asix[ 12.500000410000] usbcore: registered new interface driver cdc_acm[ 1.500000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters[ 1.510000] Initializing USB Initializing USB Mass Storage driver...[ 12.520000410000] usbcore: registered new interface driver usb-storage[ 12.520000420000] USB Mass Storage support registered.[ 12.530000420000] mice: PS/2 mouse device common for all mice[ 12.530000430000] ata1usb 1-1: SATA link down (SStatus 0 SControl 300)new high speed USB device using musb-hdrc and address 2[ 12.540000440000] input: max7359 as /devices/platform/omap/omap_i2c.4/i2c-4/4-0038/input/input0[ 12.550000450000] input: TSC2007 Touchscreen as /devices/virtual/input/input1[ 12.460000] tps65910-rtc tps65910-rtc: Found RC mode, switching to crystal[ 2.560000470000] omap_rtc omap_rtctps65910-rtc tps65910-rtc: rtc core: registered omap_rtc tps65910-rtc as rtc0[ 12.570000480000] i2c /dev entries driver[ 12.570000480000] Linux video capture interface: v2.00[ 2.480000] Driver for 1-wire Dallas network protocol.[ 12.730000500000] ina219 ina2xx 3-0041: hwmon1: sensor 'ina219'power monitor INA226 (Rshunt = 10000 uOhm)[ 12.790000500000] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec[ 12.810000510000] usbcoreBluetooth: registered new interface HCI UART driver usbhidver 2.2[ 12.810000510000] usbhidBluetooth: USB HID core driverHCI H4 protocol initialized[ 12.820000520000] notify_init Bluetooth: notify drivercreated for remote proc id 2 at physical Address 0xbf900000HCI BCSP protocol initialized[ 12.830000530000] ALSA device list:Bluetooth: HCILL protocol initialized[ 12.830000540000] No soundcards found.cpuidle: using governor ladder[ 12.830000550000] TCP cubic registeredcpuidle: using governor menu[ 12.840000570000] NETusb 1-1: Registered protocol family 17New USB device found, idVendor=0424, idProduct=2512[ 12.840000570000] Registering the dns_resolver key type[ usb 1-1.850000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3New USB device strings: Mfr=0, Product=0, SerialNumber=0[ 12.860000580000] Power Management for TI81XX.[ hub 1-1:1.8700000: USB hub found[ 2.590000] Detected MACID=d4usbcore:94:a1:8e:68:24registered new interface driver usbhid[ 12.870000590000] omap_rtc omap_rtcusbhid: setting system clock to 2000-01-01 00:00:00 UTC (946684800)USB HID core driver[ 2.390000600000] notify_init : notify drivercreated for remote proc id 2 at physical Address 0xbf900000[ 2.390000610000] CPSW phy found UDA134X SoC Audio Codec[ 2.610000] hub 1-1: id is 1.0: 0x7c0f12 ports detected[ 2.400000630000] asoc: uda134x-hifi <-> davinci-mcasp.2 mapping ok[ 2.400000630000] CPSW phy found asoc: id is HDMI-DAI-CODEC <-> hdmi-dai mapping ok[ 2.640000] ALSA device list: 0x1410cc2[ 32.420000640000] IP-Config: Complete #0:NAON DDS[ 32.420000650000] device=eth0, addr=192.168.0.122, mask=255.255.255.0, gw=192.168.0.254,NET: Registered protocol family 26[ 32.430000650000] host=naon, domain=, nis-domain=(none),TCP cubic registered[ 32.430000650000] bootserver=192.168.0.121, rootserver=192.168.0.121, rootpath=NET: Registered protocol family 17[ 42.390000660000] PHYcan: 0:01 - Link is Up - 0/Half[ 4.400000] PHY: 0:01 - Link is Down[ 5.390000] PHY: 0:06 - Link controller area network core (rev 20090105 abi 8)[ 2.670000] NET: Registered protocol family 29[ 2.670000] can: raw protocol (rev 20090105)[ 2.680000] can: broadcast manager protocol (rev 20090105 t)[ 2.680000] Bluetooth: L2CAP ver 2.15[ 2.690000] Bluetooth: L2CAP socket layer initialized[ 2.690000] Bluetooth: SCO (Voice Link) ver 0.6[ 2.700000] Bluetooth: SCO socket layer initialized[ 2.700000] Bluetooth: RFCOMM TTY layer initialized[ 2.710000] Bluetooth: RFCOMM socket layer initialized[ 2.710000] Bluetooth: RFCOMM ver 1.11[ 2.710000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 2.720000] Bluetooth: BNEP filters: protocol multicast[ 2.730000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 2.730000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>[ 2.740000] All bugs added by David S. Miller <davem@redhat.com>[ 2.750000] lib80211: common routines for IEEE802.11 drivers[ 2.750000] Registering the dns_resolver key type[ 2.760000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3[ 2.760000] omap_voltage_late_init: Voltage driver support not added[ 2.770000] Power Management for TI81XX.[ 2.780000] CPSW initializing in DUAL mode[ 2.790000] Detected MACID=00:17:EB:52:6A:8A[ 2.790000] Detected MACID=00:17:EB:52:6A:8B[ 2.800000] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)[ 3.320000] [ 3.320000] CPSW phy found : id is : 0x1410cc2[ 3.330000] 8021q: adding VLAN 0 to HW filter on device eth1[ 3.340000] Adding vlanid 0 to vlan filter[ 4.350000] IP-Config: Complete:[ 4.350000] device=eth1, addr=192.168.0.123, mask=255.255.255.0, gw=192.168.0.254,[ 4.360000] host=naon, domain=, nis-domain=(none),[ 4.360000] bootserver=192.168.0.121, rootserver=192.168.0.121, rootpath=[ 4.370000] Waiting 5sec before mounting root device...[ 6.320000] PHY: 0:01 - Link is Up - 100/Full[ 59.400000550000] VFS: Mounted root (nfs filesystem) on device 0:14.[ 59.410000560000] devtmpfs: mounted[ 59.410000560000] Freeing init memory: 204K180K

[ 6 10.170000740000] udevd (8788): /proc/8788/oom_adj is deprecated, please use /proc/8788/oom_score_adj instead.[ 14.160000] udev: renamed network interface eth0 to eth15

[ 1116.440000130000] NET: Registered protocol family 10

Fri Dec No state is present for card DDSFound hardware: "" "" "" "" ""Hardware is initialized using a generic methodNo state is present for card DDSThu Apr 9 184 12:5421:00 UTC 20112013

BW Phy Addr : 0x48180600 Data : 0x000000010x00000002

AW Phy Addr : 0x48180620 Data : 0x000700020x00050002

BW Phy Addr : 0x58088000 Data : 0xeafffffe0xc9252892

BW Phy Addr : 0x58098000 Data : 0xeafffffe0xb7771671

FATAL: Module syslink not found.Running depmod to look for missing syslink module..[ 1219.870000040000] SysLink version : 2.0020.0502.8520[ 1219.870000040000] SysLink module created on Date:Feb 3 2012 Apr 22 2013 Time:1611:1551:0939

FIRMWARE: memory map bin file: /usr/share/ti/ti-media-controller-utils/naon/mm_dm81xxbm.binFIRMWARE: isI2cInitRequiredOnM3: 0Current FL_DEBUG = errorAllowed FL_DEBUG levels: error, warning, info, debug, logMemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.12.1FIRMWARE: Memory Configuration status : In Progress

FIRMWARE: memory map bin file: /usr/share/ti/ti-media-controller-utils/naon/mm_dm81xxbm.binFIRMWARE: isI2cInitRequiredOnM3: 0Current FL_DEBUG = errorAllowed FL_DEBUG levels: error, warning, info, debug, logMemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.12.1FIRMWARE: Memory Configuration status : In Progress

[ 1521.420000780000] HDMI W1 rev 4.0[ 21.780000] HDMI CEC Spec version 1.2[ 21.790000] HDCP initialized[ 22.120000] I2C No Ack[ 22.120000] [ 22.580000] Naon EVB Mid dummy decoder registered[ 22.630000] ti81xxvin ti81xxvin: registered sub device tvp7002[ 22.640000] ti81xxvin ti81xxvin: TI81xx HDVPSS Capture driver initialized

[ 17.870000] [drm] Initialized drm 1.1.0 20060810[ 18.210000] [drm] Initialized pvrsrvkm 1.7.783851 Thu May 24 CEST 2012 for SGX on minor 0FATAL: Module omaplfb not found.FATAL: Module bufferclass_ti not found.BusyBox v1.13.2 (2011-12-09 14:43:32 IST) multi-call binary Usage: mknod insmod filename [OPTIONSargs] NAME TYPE MAJOR MINOR Create a special file (block, character, or pipe) Options: -m Create the special file using the specified mode (default a=rw)TYPEs include: b: Make a block device c or u: Make a character device p: Make a named pipe (MAJOR and MINOR are ignored) chmod: /dev/pvrsrvkm: No such file or directory

Memory mapped at address 0x400b30000x40107000.Read at address 0x48180F04 (0x400b3f040x40107f04): 0x00000001Write at address 0x48180F04 (0x400b3f040x40107f04): 0x00000000, readback 0x00000000

Memory mapped at address 0x4023d0000x4025e000.Read at address 0x48180900 (0x4023d9000x4025e900): 0x00000102Write at address 0x48180900 (0x4023d9000x4025e900): 0x00000002, readback 0x00000002

Memory mapped at address 0x401390000x4032e000.Read at address 0x48180920 (0x401399200x4032e920): 0x00040002Write at address 0x48180920 (0x401399200x4032e920): 0x00000002, readback 0x00000002