3,260
edits
Changes
m
== Rel. 3.0.0 ==
* Release date: December 2012* Status: released* EZSDK version: 5== Rel.05* Supported carrier boards: NaonEVB-Lite, NaonEVB-Mid1.0.0 ==
=== Notes === * Added support for the following interfaces/features** Video Input port VIN1 (additional host required)** SATA** [[NELK Power Management|Suspend to RAM]]** [[NELK Power Management|OPP Support]]** [[:Category:DWM|DWM]] (Wireless add-on module) on SDIO ([[:Category:NaonEVB-Lite|NaonEVB-Lite]] only)* NAND is supported (it basically works), but needs more qualification testing* Battery powered RTC (from the PMIC) basically works, but a kernel driver is not yet available; the RTC included in the DM814x/AM387x processor has a proper kernel driver, but is not battery powered. == Rel. 4.0.0 == * Release date: April 2013May 2012* Status: plannedobsolete* EZSDK version: 5.05.02.0003* Supported carrier boards: NaonEVB-Lite, NaonEVB-Midonly
no edit summary
=Naon Embedded Linux Kit (NELK) Release Notes=
== Rel. 14.0.0 == * Release date: April 2013* Status: planned* EZSDK version: 5.05.02.00* Supported carrier boards: NaonEVB-Lite, NaonEVB-Mid === Notes === * Added support for Maya and Dido SOMs* Added support for the following interfaces/features** PMIC RTC (battery powered)** /proc/ti81xx_cpuinfo entry** passing the mac address from u-boot to Linux kernel (command line parameters : eth0=xx:xx:xx:xx:xx:xx eth1=xx:xx:xx:xx:xx:xx)** dido 2GiB RAM** driver CPSW dual emac mode vs switch mode at runtime == Rel. 3.0.0 ==
* Release date: May December 2012* Status: obsoletereleased* EZSDK version: 5.0305* Supported carrier boards: NaonEVB-Lite only, NaonEVB-Mid
=== Notes ===
* Initial release* Supported Added support for the following interfaces/features:** SPI NOR Flash Video Input port VIN1 (bootadditional host required)** EEPROMSATA** Keypad controller[[NELK Power Management|Suspend to RAM]]** Touch screen controller[[NELK Power Management|OPP Support]]** ADC** EMAC0 RMII [[:Category:DWM|DWM]] (Fast EthernetWireless add-on module)** EMAC1 RGMII on SDIO (Gigabit Ethernet)** SD/MMC1** Video Output port VOUT0 (24 bit)** UART0 (2[[:Category:NaonEVB-Lite|NaonEVB-wireLite]] only)** SPI0 NAND is supported (boot flashit basically works), but needs more qualification testing** I2C0** I2C1 Battery powered RTC (DDC HDMIfrom the PMIC)** I2C2** HDMI** GPIO** SGX 3D accelerator** HDVICP2 codec enginebasically works, but a kernel driver is not yet available; the RTC included in the DM814x/AM387x processor has a proper kernel driver, but is not battery powered.
== Rel. 2.0.0 ==
The root file system provided with this release has been extended using opkg and the Angstrom repositories (see [[Uses_cases_with_Naon_Embedded_Linux_Kit#Extending_the_root_file_system]] for more information). Please refer to [[NELK 2.0.0 root file system package list (NAON)]] for a full list of the installed packages.
=== Notes ===
* Added support for Maya and Dido SOMsInitial release* Added support for the following Supported interfaces/features:** SPI NOR Flash (boot)** EEPROM** Keypad controller** Touch screen controller** ADC** EMAC0 RMII (Fast Ethernet)** PMIC RTC EMAC1 RGMII (battery poweredGigabit Ethernet)** SD/proc/ti81xx_cpuinfo entryMMC1** Video Output port VOUT0 (24 bit)** passing the mac address from uUART0 (2-wire)** SPI0 (boot to Linux kernel flash)** I2C0** I2C1 (command line parameters : eth0=xx:xx:xx:xx:xx:xx eth1=xx:xx:xx:xx:xx:xxDDC HDMI)** dido 2GiB RAMI2C2** HDMI** GPIO** SGX 3D accelerator** driver CPSW dual emac mode vs switch mode at runtimeHDVICP2 codec engine
