=== Quick Linux quick start === To run Linux on the board, please follow the steps reported below: # connect the serial cable, provided with the board, to J3 pin-strip connector# connect this cable to PC COM port through a NULL-modem cable (not provided)# start your favourite terminal software on PC; communication parameters are:#* baud rate: 115200 Bps#* data bits: 8#* stop bits: 1#* parity: none# connect the system to Ethernet LAN (RJ45 connector, J6)# connect a 12Vcc power supply to to the power jack (JP2) Once power has been applied, U-Boot bootloader will be executed and the following messages will be printed on serial console: <pre class="board-terminal">U-Boot 2009.11-00074-g34e0d5b-dirty (Jul 17 2012 - 11:00:55) [dacu-android-0.9.2] AM35xx-GP ES2.0, L3-165MHzDAVE Lizard board + LPDDR/NANDI2C: readyDRAM: 256 MBFlash: 32 MBNAND: 1024 MiBIn: serialOut: serialErr: serialDie ID #7cf60001000000000160ae2d0b01e00aNet: davinci_emac_initializeEthernet PHY: GENERIC @ 0x11DaVinci EMAC Hit any key to stop autoboot: 0 =></pre>   === Android quick start===This section describes how to quick start Android operating system on Dacu system.