Bureaucrats, dave_user, Administrators
8,154
edits
Changes
→How to burn the boot partition
When the NAND flash is not burned yet, the product is usually configured in order to boot from a different device such as an SD card or through serial download mode. Once the Linux kernel is up and running, the <code>kobs-ng</code> can be run as shown in the following example:
<pre class="boardworkstation-terminal">
./kobs-ng-5.4 init -x -v -w --chip_0_device_path=/dev/mtd0 mx6sx_board_nand_u-boot.imx
MTD CONFIG:
