Changes

Jump to: navigation, search

MITO 8M Mini SOM/MITO 8M Mini Hardware/Peripherals/MIPI

343 bytes added, 09:53, 29 January 2021
Peripheral MIPI
<section begin="History" />
{| style="border-collapse:collapse; "
! colspan="4" style="width:100%; text-align:left" ; border-bottom:solid 2px #ededed" |History
|-
|}
<section end="History" />
__FORCETOC__
<section begin="Body" />
==Peripheral MIPI ==
* The '''Camera Serial Interface''' (CSI) is a specification of the Mobile Industry Processor Interface (MIPI) Alliance. It defines an interface between a camera and a host processor.
* The '''Display Serial Interface''' (DSI) is a specification by the Mobile Industry Processor Interface (MIPI) Alliance aimed at reducing the cost of display controllers in a mobile device. It is commonly targeted at LCD and similar display technologies.
The two CSI interface on MITO 8M Mini/Nano SOM:
* CSI1 is avaiable on SODIMM connector pinout
* CSI2 is avaiable on ONE PIECE expansion connector J5
The DSI interface is internally used on MITO 8M Mini/Nano SOM to generate an LVDS output interface. More details on[[MITO 8M Mini SOM/MITO 8M Mini Hardware/Peripherals/LVDS | LVDS section]].
=== CSI ===The CSI interface on MITO 8M Mini/Nano SOM is avaiable on SODIMM connector pinout.==== Description ====
The MIPI CSI port supports the following standards and features:
*Configurable interface logic Compliant to support most commonly available CMOS sensorsMIPI CSI2 Specification V1.3 except for C-PHY feature (Board Approved)
*Scalable data lane support, 1 to 4 Data Lanes
*Support for CCIR656 video YUV420, YUV420 (Legacy), YUV420 (CSPS), YUV422 of 8-bits and 10-bits RGB565, RGB666, RGB888*RAW6, RAW7, RAW8, RAW10, RAW12, RAW14 === DSI ===The DSI interface as well as traditional sensor is internally used on MITO 8M Mini/Nano SOM to generate an LVDS output interface.*8-bit More details on[[MITO 8M Mini SOM/MITO 8M Mini Hardware/ 16-bit Peripherals/ 24LVDS | LVDS section]]. This interface could be directly routed on the SO-bit data port for YCbCrDIMM connector, YUV, or RGB data inputby removing the MIPI-to-LVDS bridge.*8-bit Depending on [[MITO 8M Mini SOM/ 10-bit Part number composition|MITO 8M Mini SOM P/ 16-bit data N composition]] ==== Description ====The MIPI CSI port for Bayer data inputsupports the following standards and features:* Complies to MIPI DSI Standard Specification V1.01r11*Implements all three CSI-2 MIPI layers Maximum resolution ranges up to WQHD (Pixel 1920x1080p60, 24bpp)* Scalable data lane support, 1 to byte packing4 Data Lanes* Supports pixel format: 16bpp, low level protocol18bpp packed, Lane management18bpp loosely packed (3 byte format), and 24bpp 
===Pin mapping===
a000298_approval, dave_user
299
edits

Navigation menu