Difference between revisions of "XUELK-AN-001: Using WiFi-Bluetooth combo plugin with SBC Lynx"
(→Limitations) |
(→History) |
||
| Line 10: | Line 10: | ||
|- | |- | ||
|1.0.0 | |1.0.0 | ||
| + | |August 2016 | ||
|1.0.0 | |1.0.0 | ||
| − | |||
|First public release | |First public release | ||
|- | |- | ||
|} | |} | ||
| + | |||
==Introduction== | ==Introduction== | ||
[[:Category:SBC_Lynx|SBC Lynx]] can be populated with [[Wireless_Module_(DWM)|DWM WiFi/Bluetooth combo plugin]] to easily add wireless connectivity. | [[:Category:SBC_Lynx|SBC Lynx]] can be populated with [[Wireless_Module_(DWM)|DWM WiFi/Bluetooth combo plugin]] to easily add wireless connectivity. | ||
Revision as of 07:52, 11 August 2016
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
History[edit | edit source]
| Version | Date | XUELK version | Notes |
|---|---|---|---|
| 1.0.0 | August 2016 | 1.0.0 | First public release |
Introduction[edit | edit source]
SBC Lynx can be populated with DWM WiFi/Bluetooth combo plugin to easily add wireless connectivity.
This application note describes how to enable these interfaces when working with XUELK 1.0.0
Limitations[edit | edit source]
DWM wireless module shares some signals with mezzanine board connector J53. Thus, when DWM module is used, the following signals must be left floating:
- J53.1 (UART2_RX_DATA)
- J53.2 (UART2_nRTS)
- J53.3 (UART2_TX_DATA)
- J53.4 (UART2_nCTS).
