Step by step guide to your first android app (DACU)

Info Box Applies to Android Applies to Dacu

Contents

IntroductionEdit

This tutorial shows how to develop your first Android application and run it on the DACU platform.

Boot the systemEdit

Let's assume the system is configured to boot loading the kernel and root file system from the internal flash.

Start the system as described in the Running Android in "normal mode" section.

Change the default ip addressEdit

If the default ip address is not suitable for your network configuration, you need to modify it. The first thing to do is to connect the null-modem serial cable to the J3 connector

Dacu serial cable

and start your preferred terminal emulator, as described in the Running Android in "full control mode" section.

Configure and run the Android Debug Bridge (ADB)Edit