Difference between revisions of "CAN interfaces (Naon)"
DevWikiAdmin (talk | contribs) |
|||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{InfoBoxTop}} | {{InfoBoxTop}} | ||
{{AppliesToNaon}} | {{AppliesToNaon}} | ||
| + | {{AppliesToDido}} | ||
{{InfoBoxBottom}} | {{InfoBoxBottom}} | ||
DM8148 processor integrates two CAN controller knows as DCAN0 and DCAN1. | DM8148 processor integrates two CAN controller knows as DCAN0 and DCAN1. | ||
| − | By default DCAN0 is connected to on-board CAN transceiver (TI SN65HVD232). CAN_H and CAN_L signals are routed to pins J1.96 and J1.98 respectively. Please note that CAN transceiver might be not populated on request. In this case DCAN0_TX and DCAN0_RX processor's signals are routed to J1.96 and J1.98 respectively. For more details about this option please contact [[HowTo_Contact_Sales_Support| Sales department]]. | + | ==DCAN0== |
| + | By default DCAN0 is connected to on-board CAN transceiver (TI SN65HVD232). CAN_H and CAN_L signals are routed to pins J1.96 and J1.98 respectively. | ||
| + | |||
| + | Please note that CAN transceiver might be not populated on request. In this case DCAN0_TX and DCAN0_RX processor's signals are routed to J1.96 and J1.98 respectively. For more details about this option please contact [[HowTo_Contact_Sales_Support| Sales department]]. | ||
| + | ==DCAN1== | ||
| + | DCAN1 TX and RX signals are connected to J1.19 and J1.21 rispectively. | ||
Latest revision as of 14:36, 11 November 2016
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
DM8148 processor integrates two CAN controller knows as DCAN0 and DCAN1.
DCAN0[edit | edit source]
By default DCAN0 is connected to on-board CAN transceiver (TI SN65HVD232). CAN_H and CAN_L signals are routed to pins J1.96 and J1.98 respectively.
Please note that CAN transceiver might be not populated on request. In this case DCAN0_TX and DCAN0_RX processor's signals are routed to J1.96 and J1.98 respectively. For more details about this option please contact Sales department.
DCAN1[edit | edit source]
DCAN1 TX and RX signals are connected to J1.19 and J1.21 rispectively.
