3,260
edits
Changes
→Quick start (NELK)
===Quick start (NELK)===
This section describes how to quick start NaonEVB-Mid-based system, provided that it is programmed according to NELK configuration.
connect the serial cable, provided with the board, to J17
connect this cable to PC COM port through a NULL-modem cable (not provided)
start your favourite terminal software on PC; communication parameters are:
baud rate: 115200 Bps
data bits: 8
stop bits: 1
parity: none
(optional) to connect the system to Ethernet LAN, please plug cable on connector J11
(optional) to connect the system to HDMI TV/LCD, please plug cable on connector J6
connect a 12Vcc power supply to J14
Once power has been applied, U-Boot bootloader will be executed and the following messages will be printed on serial console (please note that messages may vary due different U-Boot releases)
===Hardware information===
====Bootstrap settings====
