3,260
edits
Changes
Created page with "{{InfoBoxTop}} {{Applies To NaonEVB-Mid}} {{InfoBoxBottom}} === Dip Switch settings === Bootstrap setting on Category:NaonEVB-Mid can be changed by using S5/S6/S7 dip s..."
{{InfoBoxTop}}
{{Applies To NaonEVB-Mid}}
{{InfoBoxBottom}}
=== Dip Switch settings ===
Bootstrap setting on [[Category:NaonEVB-Mid|NaonEVB-Mid]] can be changed by using S5/S6/S7 dip switch. Those switch changes BTMODE[4:0] accordingly with the following table.
{| class="wikitable" !NaonEVB-Mid Boot Settings
|-
!DIP SWITCH
!OFF Position
!ON Position
|-
|S5.1
|BTMODE0=1
|BTMODE0=0
|-
|S5.2
|BTMODE1=1
|BTMODE1=0
|-
|S6.1
|BTMODE2=1
|BTMODE2=0
|-
|S6.2
|BTMODE3=1
|BTMODE3=0
|-
|S7.1
|BTMODE4=1
|BTMODE4=0
|}
Please note that S7.2 is RFU - that stands for "Reserved for future use" - and '''must not be selected'''.
=== Examples ===
To configure the [[Boot sequence (Naon)|default boot sequence]] change the dip switch as follows
{| class="wikitable" !NaonEVB-Mid Default Naon Boot Settings
|-
!DIP SWITCH
!Position
|-
|S5.1
|OFF
|-
|S5.2
|OFF
|-
|S6.1
|OFF
|-
|S6.2
|ON
|-
|S7.1
|OFF
|-
|S7.2
|OFF
|}
To configure the [[Bootstrap settings (NaonEVB-Lite)|default NaonEVB-Lite boot sequence]] change the dip switch as follows
{| class="wikitable" !NaonEVB-Mid Default NaonEVB-Lite Boot Settings
|-
!DIP SWITCH
!Position
|-
|S5.1
|ON
|-
|S5.2
|OFF
|-
|S6.1
|ON
|-
|S6.2
|ON
|-
|S7.1
|ON
|-
|S7.2
|OFF
|}
{{Applies To NaonEVB-Mid}}
{{InfoBoxBottom}}
=== Dip Switch settings ===
Bootstrap setting on [[Category:NaonEVB-Mid|NaonEVB-Mid]] can be changed by using S5/S6/S7 dip switch. Those switch changes BTMODE[4:0] accordingly with the following table.
{| class="wikitable" !NaonEVB-Mid Boot Settings
|-
!DIP SWITCH
!OFF Position
!ON Position
|-
|S5.1
|BTMODE0=1
|BTMODE0=0
|-
|S5.2
|BTMODE1=1
|BTMODE1=0
|-
|S6.1
|BTMODE2=1
|BTMODE2=0
|-
|S6.2
|BTMODE3=1
|BTMODE3=0
|-
|S7.1
|BTMODE4=1
|BTMODE4=0
|}
Please note that S7.2 is RFU - that stands for "Reserved for future use" - and '''must not be selected'''.
=== Examples ===
To configure the [[Boot sequence (Naon)|default boot sequence]] change the dip switch as follows
{| class="wikitable" !NaonEVB-Mid Default Naon Boot Settings
|-
!DIP SWITCH
!Position
|-
|S5.1
|OFF
|-
|S5.2
|OFF
|-
|S6.1
|OFF
|-
|S6.2
|ON
|-
|S7.1
|OFF
|-
|S7.2
|OFF
|}
To configure the [[Bootstrap settings (NaonEVB-Lite)|default NaonEVB-Lite boot sequence]] change the dip switch as follows
{| class="wikitable" !NaonEVB-Mid Default NaonEVB-Lite Boot Settings
|-
!DIP SWITCH
!Position
|-
|S5.1
|ON
|-
|S5.2
|OFF
|-
|S6.1
|ON
|-
|S6.2
|ON
|-
|S7.1
|ON
|-
|S7.2
|OFF
|}