Bootstrap settings (NaonEVB-Mid)

From DAVE Developer's Wiki
Jump to: navigation, search
Info Box
Naon-evb-mid top.png Applies to NaonEVB-Mid

Dip Switch settings

Bootstrap settings on NaonEVB-Mid can be changed by using S5/S6/S7 dip switch. Those switch changes BTMODE[4:0] accordingly with the following table.

DIP SWITCH OFF Position ON Position
S5.1 BTMODE0=1 BTMODE0=0
S5.2 BTMODE1=1 BTMODE1=0
S6.1 BTMODE2=1 BTMODE2=0
S6.2 BTMODE3=1 BTMODE3=0
S7.1 BTMODE4=1 BTMODE4=0

Please note that S7.2 is RFU - that stands for "Reserved for future use" - and must not be selected.

Examples

To configure the default boot sequence change the dip switch as follows

DIP SWITCH Position
S5.1 OFF
S5.2 OFF
S6.1 OFF
S6.2 ON
S7.1 OFF
S7.2 OFF


To set the same configuration as default NaonEVB-Lite boot sequence, change the dip switch as follows


DIP SWITCH Position
S5.1 ON
S5.2 OFF
S6.1 ON
S6.2 ON
S7.1 ON
S7.2 OFF