Bureaucrats, dave_user, Administrators
4,650
edits
Changes
no edit summary
*Removed <code>busybox</code>
*Added notes about physical interfaces
|-
|2.1.0
|April 2017
|Added section ''Using the raw image''
|-
|}
[2] The provided root file system is derived from this one: https://rcn-ee.com/rootfs/eewiki/barefs/debian-8.7-bare-armhf-2017-01-14.tar.xz.
===Using the raw image===
For convenience, the raw image of the microSD card is provided as well. This image is the result of the procedure described in the previous section, applied to a 16 GB card. The image can be downloaded [https://mirror.dave.eu/lynx/debian/20170403/20170403-sbclynx-debian-8-usd.img.zip here].
Once decompressed, it can be written directly to the card.
On a Linux host issue the following command (assuming the card is associated to the <code>/dec/sdc</code> device file):
<pre class="board-terminal">
sudo dd if=/path/to/20170403-sbclynx-debian-8-usd.img of=/dev/sdc oflag=sync
</pre>
In case your host is a Windows machine, you can use the well-known ''Win32 Disk Imager'' tool. It can be downloaded [https://sourceforge.net/projects/win32diskimager/ here].
[[File:Sbclynx-debian-disk-imager-win.png|thumb|center|''Win32 Disk Imager'' tool]]
After installing it, open it and (see also the image above):
#select the raw image file
#select the drive letter of the microSD card
#press ''Write''.
==Adding packages==
