Changes

← Older edit

XUELK-AN-002: Running Debian distribution

86,511 bytes added, 16:36, 12 February 2021

no edit summary

{{WarningMessage|text=This application note was validated against specific versions of the kit only. It may not work with other versions. Supported versions are listed in the ''History'' section.}}

{{ImportantMessage|text=Regarding the Molex antenna used in this AN. It is valid only for '''No EU''' countries - see [https://www.lairdconnect.com/documentation/regulatory-information-tiwi-ble link]}}

== History ==

{| class="wikitable" border="1"

!Version

!XUELK version

!Date

!Notes

|-

|1.0.0

|1.1.3

|February 2017

|First public release

|-

|2.0.0

|1.1.3

|April 2017

|

*Added several packages to the root file system

*Removed <code>busybox</code>

*Added notes about physical interfaces

|-

|2.1.0

|1.1.3

|April 2017

|

*Added section ''Using the raw image''

*Added notes about <code>ssh</code> server configuration

*Added notes about <code>MySQL</code> server installation and configuration

|-

|}

==Introduction==

Several "distributions" are available for embedded Linux devices. [https://www.yoctoproject.org Yocto] and [https://buildroot.org Buildroot] are just two examples of the most common. Nevertheless, for some applications the use of a desktop/server distribution might be preferable. Since they are not conceived for embedded platforms, these distributions have to be carefully tailored, in order to match hardware resources.[1]

This application note shows how to run one of such distributions - Debian Jessie - on SBC Lynx. '''It is assumed that the reader if already familiar with''' [[AXEL_ULite_and_SBC_Lynx_Embedded_Linux_Kit_(XUELK)|'''AXEL ULite and SBC Lynx Embedded Linux Kit (XUELK)''']], as it is the basis of this work.

The procedure was tested on an SBC Lynx with ConfigID=0x0000000C (PCB revision CS214515A), starting from XUELK 1.1.3 binaries.

==Initial configuration==

For the sake of simplicity, the same approach described [[AXEL_ULite_and_SBC_Lynx_Embedded_Linux_Kit_(XUELK)#Target_setup_and_first_boot|here]] will be used. In other words, a microSD card containing Linux kernel image, device tree blob, and decompressed root file system will be used. It is ~~used~~worth to remember that such a microSD card can be created following the instructions described [[How_to_create_a_bootable_microSD_card_(XUELK)|here]]. Starting from such a card, we need to do the following operations:*adding a modified version of the Linux kernel image [1]*replacing the default Yocto root file system delivered along with the XUELK, with the Debian one. [2]It is assumed that the microSD card is connected to the host machine. As such, the two partitions are mounted as <code>/media/BOOT</code> and <code>/media/ROOTFS</code>.

~~It is quite straightforward to prepare a microSD card~~ The kernel image and the compressed archive containing ~~a Debian minimal~~ the root file system ~~that replaces~~ are available for download at the ~~one delivered along with the XUELK~~following URLs respectively:* https://mirror.dave.eu/lynx/debian/20170403/xuelk-1.1.3_uImage.debian* https://mirror.dave.eu/lynx/debian/20170403/20170403-sbclynx-debian-8.tgz

To ~~get such an~~ copy the kernel imageto the microSD card, issue the following command ~~on your host machine~~:~~[1]~~

~~wget~~ cp -~~c https://rcn~~v xuelk-ee1.1.3_uImage.~~com/rootfs~~debian /~~eewiki~~media/~~barefs~~BOOT/~~debian-8.7-bare-armhf-2017-01-14.tar.xz~~

</pre>

~~To verify it~~Delete all the existing files in the <code>/media/ROOTFS</code> partition:

~~sha256sum debian~~sudo rm -~~8.7-bare~~rf /media/ROOTFS/*sudo tar xvzf 20170403-~~armhf~~sbclynx-~~2017-01-14.tar.xz159e1a6addc35bbfff03b5eafd5cb741086a8a016d5ab9572ab122ce64d63e5e~~ debian-8.7tgz -~~bare-armhf-2017-01-14.tar.xz~~C /media/ROOTFS/

</pre>

~~After inserting~~ Decompress the ~~microSD card into the adapter connected to the host machine, it is possible to decompress the <code>.tar.xz</code>~~ Debian root file system in the ~~<code>ROOTFS</code>~~ same partition:

~~unzip debian-8-xfce~~sudo tar xvzf 20170403-~~wandboard~~sbclynx-~~20150514.zip~~ cd debian-8.~~7-bare-armhf-2017-01-14/tar xvf armhf-rootfs-debian-jessie.tar~~ tgz -C /media~~/dvdk~~/ROOTFS/~~sudo umount /media/dvdk/BOOT~~ ~~sudo umount /media/dvdk/ROOTFS~~

</pre>

~~You can then insert~~ Remove the ~~microSD~~ card from the host and plug it into the slot of SBC Lynx~~'s slot~~. ~~On target side~~ After powering it up, ~~these are the messages printed out on~~ stop the ~~serial console~~automatic boot process, ~~when~~ and edit the ~~root file system is mounted~~<code>mmcboot</code> variable as follows:

=> edit mmc_loadkedit: fatload mmc 0:1 ${loadaddr} xuelk-1.1.3_uImage.debian</pre> Then start the Linux kernel by issuing the <code>run mmcboot</code> command. The Linux kernel should boot and mount the Debian root file system as shown in the following box (click on the ''Expand'' link to open it):<pre class="board-terminal mw-collapsible mw-collapsed">=> run mmcbootreading xuelk-1.1.3_uImage.debian6752936 bytes read in 338 ms (19.1 MiB/s)reading imx6ul-lynx.dtb31436 bytes read in 22 ms (1.4 MiB/s)FDT: override 'som_uniqueid' with 'e6b3f362:393d61d4'FDT: override 'cb_uniqueid' with '00000000:00000000'## Booting kernel from Legacy Image at 80800000 ... Image Name: Linux-3.14.52-xuelk-1.1.3 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6752872 Bytes = 6.4 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK reserving fdt memory region: addr=83000000 size=8000 Using Device Tree in place at 83000000, end 8300afff Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Linux version 3.14.52-xuelk-1.1.3 (guglielmini@linuxserver2) (gcc version 4.9.2 (GCC) ) #3 SMP PREEMPT Thu Mar 16 09:28:51 CET 2017[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5(ARMv7), cr=10c53c7d[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache[ 0.000000] Machine model: Freescale i.MX6 UltraLite LYNX Board[ 0.000000] cma: CMA: reserved 64 MiB at 9c000000[ 0.000000] Memory policy: Data cache writealloc[ 0.000000] PERCPU: Embedded 8 pages/cpu @9bbc0000 s8832 r8192 d15744 u32768[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048[ 0.~~114803~~000000] Kernel command line: root=/dev/mmcblk0p2 rootwait rw console=ttymxc0,115200 vmalloc=400M mtdparts=gpmi-nand:8M(nand-uboot),1M(nand-env1),1M(nand-env2),1M(nand-fdt),1M(nand-spare),8M(nand-kernel),4M(nand-splash),-(nand-ubi);spi0.0:1M(spi-uboot),256k(spi-env1),256k(spi-env2),512k(spi-dtb),6M(spi-kernel),4M(spi-splash),-(spi-free)[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)[ 0.000000] Memory: 441088K/524288K available (8253K kernel code, 599K rwdata, 3168K rodata, 408K init, 436K bss, 83200K reserved, 0K highmem)[ 0.000000] Virtual kernel memory layout:[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)[ 0.000000] vmalloc : 0xa0800000 - 0xff000000 (1512 MB)[ 0.000000] lowmem : 0x80000000 - 0xa0000000 ( 512 MB)[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)[ 0.000000] .text : 0x80008000 - 0x80b2f940 (11423 kB)[ 0.000000] .init : 0x80b30000 - 0x80b96280 ( 409 kB)[ 0.000000] .data : 0x80b98000 - 0x80c2dd38 ( 600 kB)[ 0.000000] .bss : 0x80c2dd44 - 0x80c9b134 ( 437 kB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1[ 0.000000] Preemptible hierarchical RCU implementation.[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1[ 0.000000] NR_IRQS:16 nr_irqs:16 16[ 0.000000] Switching to timer-based delay loop[ 0.000018] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns[ 0.002384] clocksource_of_init: no matching clocksources found[ 0.002734] Console: colour dummy device 80x30[ 0.002779] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)[ 0.002813] pid_max: default: 32768 minimum: 301[ 0.003222] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.003256] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.020249] Initializing cgroup subsys net_cls[ 0.020379] CPU: Testing write buffer coherency: ok[ 0.020894] /cpus/cpu@0 missing clock-frequency property[ 0.020935] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000[ 0.020998] Setting up static identity map for 0x807dcbd0 - 0x807dcc28[ 0.070694] Brought up 1 CPUs[ 0.070734] SMP: Total of 1 processors activated (6.00 BogoMIPS).[ 0.070754] CPU: All CPU(s) started in SVC mode.[ 0.072139] devtmpfs: initialized[ 0.083581] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5[ 0.084417] pinctrl core: initialized pinctrl subsystem[ 0.085356] regulator-dummy: no parameters[ 0.090485] NET: Registered protocol family 16[ 0.109011] DMA: preallocated 256 KiB pool for atomic coherent allocations[ 0.110707] cpuidle: using governor ladder[ 0.110845] cpuidle: using governor menu[ 0.111326] Use WDOG1 as reset source[ 0.129117] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered[ 0.129876] vdd3p0: 2625 <--> 3400 mV at 3000 mV[ 0.130844] cpu: 725 <--> 1450 mV at 1150 mV[ 0.131878] vddsoc: 725 <--> 1450 mV at 1175 mV[ 0.137433] syscon 20e4000.iomuxc-gpr: regmap [mem 0x020e4000-0x020e7fff] registered[ 0.144559] syscon 21ac000.romcp: regmap [mem 0x021ac000-0x021affff] registered[ 0.146058] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered[ 0.151918] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.[ 0.151952] hw-breakpoint: maximum watchpoint size is 8 bytes.[ 0.155717] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver[ 0.158603] 20dc000.gpc supply pu not found, using dummy regulator[ 0.192082] bio: create slab <bio-0> at 0[ 0.198737] mxs-dma 1804000.dma-apbh: initialized[ 0.199687] vref-3v3: 3300 mV[ 0.200455] usb_otg1_vbus: 5000 mV[ 0.201231] usb_otg2_vbus: 5000 mV[ 0.202070] wilink-wl-en: 3300 mV[ 0.203906] i2c-core: driver [max17135] using legacy suspend method[ 0.203933] i2c-core: driver [max17135] using legacy resume method[ 0.205251] SCSI subsystem initialized[ 0.206492] usbcore: registered new interface driver usbfs[ 0.206668] usbcore: registered new interface driver hub[ 0.207010] usbcore: registered new device driver usb[ 0.208698] imx-i2c 21a0000.i2c: Cannot look up pinctrl state recovery: -19[ 0.210225] i2c i2c-0: IMX I2C adapter registered[ 0.210475] Linux video capture interface: v2.00[ 0.210656] pps_core: LinuxPPS API ver. 1 registered[ 0.210682] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.210763] PTP clock support registered[ 0.213526] MIPI CSI2 driver module loaded[ 0.214093] Advanced Linux Sound Architecture Driver Initialized.[ 0.216077] Bluetooth: Core ver 2.18[ 0.216206] NET: Registered protocol family 31[ 0.216232] Bluetooth: HCI device and connection manager initialized[ 0.216272] Bluetooth: HCI socket layer initialized[ 0.216306] Bluetooth: L2CAP socket layer initialized[ 0.216392] Bluetooth: SCO socket layer initialized[ 0.217373] cfg80211: Calling CRDA to update world regulatory domain[ 0.218432] Switched to clocksource mxc_timer1[ 0.244751] NET: Registered protocol family 2[ 0.246715] TCP established hash table entries: 4096 (order: 2, 16384 bytes)[ 0.246852] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)[ 0.247011] TCP: Hash tables configured (established 4096 bind 4096)[ 0.247129] TCP: reno registered[ 0.247168] UDP hash table entries: 256 (order: 1, 8192 bytes)[ 0.247224] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)[ 0.247759] NET: Registered protocol family 1[ 0.248663] RPC: Registered named UNIX socket transport module.[ 0.248699] RPC: Registered udp transport module.[ 0.248718] RPC: Registered tcp transport module.[ 0.248739] RPC: Registered tcp NFSv4.1 backchannel transport module.[ 0.251648] imx rpmsg driver is registered.[ 0.253291] Bus freq driver module loaded[ 0.255285] futex hash table entries: 256 (order: 2, 16384 bytes)[ 0.273962] VFS: Disk quotas dquot_6.5.2[ 0.274661] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)[ 0.280865] NFS: Registering the id_resolver key type[ 0.280989] Key type id_resolver registered[ 0.281014] Key type id_legacy registered[ 0.281107] jffs2: version 2.2. (NAND) c 2001-2006 Red Hat, Inc.[ 0.282982] fuse init (API version 7.22)[ 0.284195] msgmni has been set to 989[ 0.293372] io scheduler noop registered[ 0.293406] io scheduler deadline registered[ 0.293917] io scheduler cfq registered (default)[ 0.294987] imx-weim 21b8000.weim: Driver registered.[ 0.302340] MIPI DSI driver module loaded[ 0.302784] MIPI DSI driver module loaded[ 0.307241] imx-sdma 20ec000.sdma: no event needs to be remapped[ 0.307465] imx-sdma 20ec000.sdma: loaded firmware 3.2[ 0.316226] imx-sdma 20ec000.sdma: initialized[ 0.318991] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1[ 0.319657] pfuze100-regulator 0-0008: FAB: 0, FIN: 0[ 0.319690] pfuze100-regulator 0-0008: pfuze3000 found.[ 0.321037] SW1A: 700 <--> 3300 mV at 3300 mV[ 0.322777] SW1B: 700 <--> 1475 mV at 1400 mV[ 0.323913] SW2: 2500 <--> 3300 mV at 3300 mV[ 0.325038] SW3: 900 <--> 1650 mV at 1350 mV[ 0.326160] SWBST: 5000 <--> 5150 mV at 5000 mV[ 0.327315] VSNVS: 1000 <--> 3000 mV at 3000 mV[ 0.327813] VREFDDR: 750 mV[ 0.328982] VLDO1: 1800 <--> 3300 mV at 3300 mV[ 0.330651] VLDO2: 800 <--> 1550 mV at 1500 mV[ 0.331799] VCCSD: 2850 <--> 3300 mV at 3300 mV[ 0.332932] V33: 2850 <--> 3300 mV at 3300 mV[ 0.334066] VLDO3: 1800 <--> 3300 mV at 1800 mV[ 0.335194] VLDO4: 1800 <--> 3300 mV at 1800 mV[ 0.336019] Serial: IMX driver[ 0.336721] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX[ 1.145038] console [ttymxc0] enabled[ 1.150031] 2024000.serial: ttymxc7 at MMIO 0x2024000 (irq = 72, base_baud = 5000000) is a IMX[ 1.160577] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX[ 1.170504] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 60, base_baud = 5000000) is a IMX[ 1.180141] serial: Freescale lpuart driver[ 1.188140] imx sema4 driver is registered.[ 1.192657] [drm] Initialized drm 1.1.0 20060810[ 1.198524] [drm] Initialized vivante 1.0.0 20120216 on minor 0[ 1.225852] brd: module loaded[ 1.240591] loop: module loaded[ 1.260901] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xd3[ 1.267306] nand: AMD/Spansion S34ML08G1[ 1.271318] nand: 1024MiB, SLC, page size: 2048, OOB size: 64[ 1.277391] gpmi-nand 1806000.gpmi-nand: mode:4 ,failed in set feature.[ 1.284122] Scanning device for bad blocks[ 1.418476] Bad eraseblock 919 at 0x0000072e0000[ 1.659109] random: nonblocking pool is initialized[ 1.850544] Bad eraseblock 3900 at 0x00001e780000[ 2.460822] 8 cmdlinepart partitions found on MTD device gpmi-nand[ 2.467049] Creating 8 MTD partitions on "gpmi-nand":[ 2.472191] 0x000000000000-0x000000800000 : "nand-uboot"[ 2.480325] 0x000000800000-0x000000900000 : "nand-env1"[ 2.488243] 0x000000900000-0x000000a00000 : "nand-env2"[ 2.496271] 0x000000a00000-0x000000b00000 : "nand-fdt"[ 2.504172] 0x000000b00000-0x000000c00000 : "nand-spare"[ 2.512444] 0x000000c00000-0x000001400000 : "nand-kernel"[ 2.520666] 0x000001400000-0x000001800000 : "nand-splash"[ 2.528281] 0x000001800000-0x000040000000 : "nand-ubi"[ 2.537850] gpmi-nand 1806000.gpmi-nand: driver registered.[ 2.547026] m25p80 spi0.0: s25fl256s1 (32768 Kbytes)[ 2.552156] 7 cmdlinepart partitions found on MTD device spi0.0[ 2.558112] Creating 7 MTD partitions on "spi0.0":[ 2.563069] 0x000000000000-0x000000100000 : "spi-uboot"[ 2.570888] 0x000000100000-0x000000140000 : "spi-env1"[ 2.578583] 0x000000140000-0x000000180000 : "spi-env2"[ 2.586204] 0x000000180000-0x000000200000 : "spi-dtb"[ 2.593833] 0x000000200000-0x000000800000 : "spi-kernel"[ 2.601843] 0x000000800000-0x000000c00000 : "spi-splash"[ 2.609917] 0x000000c00000-0x000002000000 : "spi-free"[ 2.617455] spi_imx 2008000.ecspi: probed[ 2.623718] CAN device driver interface[ 2.630576] 2188000.ethernet supply phy not found, using dummy regulator[ 2.638656] pps pps0: new PPS source ptp0[ 2.643736] libphy: fec_enet_mii_bus: probed[ 2.650840] fec 2188000.ethernet eth0: registered PHC device 0[ 2.658305] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver[ 2.666081] usbcore: registered new interface driver pegasus[ 2.672064] usbcore: registered new interface driver rtl8150[ 2.677915] usbcore: registered new interface driver r8152[ 2.683754] usbcore: registered new interface driver asix[ 2.689429] usbcore: registered new interface driver ax88179_178a[ 2.695685] usbcore: registered new interface driver cdc_ether[ 2.701747] usbcore: registered new interface driver dm9601[ 2.707477] usbcore: registered new interface driver sr9700[ 2.713369] usbcore: registered new interface driver CoreChips[ 2.719511] usbcore: registered new interface driver smsc75xx[ 2.725479] usbcore: registered new interface driver smsc95xx[ 2.731488] usbcore: registered new interface driver net1080[ 2.737314] usbcore: registered new interface driver plusb[ 2.743023] usbcore: registered new interface driver cdc_subset[ 2.749146] usbcore: registered new interface driver zaurus[ 2.754881] usbcore: registered new interface driver MOSCHIP usb-ethernet driver[ 2.762590] usbcore: registered new interface driver cdc_ncm[ 2.768284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 2.774930] ehci-mxc: Freescale On-Chip EHCI Host driver[ 2.780776] usbcore: registered new interface driver usb-storage[ 2.787182] usbcore: registered new interface driver usbserial[ 2.793246] usbcore: registered new interface driver usbserial_generic[ 2.799976] usbserial: USB Serial support registered for generic[ 2.806129] usbcore: registered new interface driver ftdi_sio[ 2.812067] usbserial: USB Serial support registered for FTDI USB Serial Device[ 2.819561] usbcore: registered new interface driver pl2303[ 2.825269] usbserial: USB Serial support registered for pl2303[ 2.831397] usbcore: registered new interface driver usb_ehset_test[ 2.839991] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator[ 2.860160] ci_hdrc ci_hdrc.1: EHCI Host Controller[ 2.865302] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1[ 2.888512] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00[ 2.896300] hub 1-0:1.0: USB hub found[ 2.900323] hub 1-0:1.0: 1 port detected[ 2.906529] mousedev: PS/2 mouse device common for all mice[ 2.913630] snvs_pwrkey 20cc000.snvs-pwrkey: can't get snvs clock[ 2.920657] input: 20cc000.snvs-pwrkey as /devices/soc0/soc.0/2000000.aips-bus/20cc000.snvs-pwrkey/input/input0[ 2.931561] snvs_pwrkey 20cc000.snvs-pwrkey: i.MX snvs powerkey probed[ 2.939480] i2c-core: driver [egalax_allpoint_i2c] using legacy suspend method[ 2.946743] i2c-core: driver [egalax_allpoint_i2c] using legacy resume method[ 2.955387] i2c-core: driver [isl29023] using legacy suspend method[ 2.961837] i2c-core: driver [isl29023] using legacy resume method[ 2.969250] snvs_rtc 20cc034.snvs-rtc-lp: can't get snvs-rtc clock[ 2.976464] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0[ 2.984865] snvs_rtc 20cc034.snvs-rtc-lp: configured with power off disabled[ 2.992325] i2c /dev entries driver[ 2.996731] IR NEC protocol handler initialized[ 3.001769] IR RC5(x) protocol handler initialized[ 3.006604] IR RC6 protocol handler initialized[ 3.011219] IR JVC protocol handler initialized[ 3.015780] IR Sony protocol handler initialized[ 3.020497] IR RC5 (streamzap) protocol handler initialized[ 3.026098] IR SANYO protocol handler initialized[ 3.030865] IR MCE Keyboard/mouse protocol handler initialized[ 3.040058] i2c-core: driver [mag3110] using legacy suspend method[ 3.046286] i2c-core: driver [mag3110] using legacy resume method[ 3.053741] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)[ 3.062449] Bluetooth: HCI UART driver ver 2.2[ 3.066947] Bluetooth: HCI H4 protocol initialized[ 3.071815] Bluetooth: HCI BCSP protocol initialized[ 3.076812] Bluetooth: HCILL protocol initialized[ 3.081620] ci_hdrc ci_hdrc.0: there is a vbus glitch[ 3.086779] Bluetooth: HCIATH3K protocol initialized[ 3.092112] usbcore: registered new interface driver bcm203x[ 3.097994] usbcore: registered new interface driver btusb[ 3.103792] usbcore: registered new interface driver ath3k[ 3.109937] sdhci: Secure Digital Host Controller Interface driver[ 3.116154] sdhci: Copyright(c) Pierre Ossman[ 3.120595] sdhci-pltfm: SDHCI platform and OF driver helper[ 3.128886] mmc0: no vqmmc regulator found[ 3.133045] mmc0: no vmmc regulator found[ 3.178508] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA[ 3.190202] mmc1: no vqmmc regulator found[ 3.267425] mmc0: host does not support reading read-only switch. assuming write-enable.[ 3.282137] mmc0: new high speed SDHC card at address 0001[ 3.288692] mmcblk0: mmc0:0001 SD16G 14.8 GiB[ 3.295208] mmcblk0: p1 p2[ 3.318523] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA[ 3.336879] caam 2140000.caam: Instantiated RNG4 SH0[ 3.358853] sdhci-esdhc-imx 2194000.usdhc: card claims to support voltages below defined range[ 3.397638] caam 2140000.caam: Instantiated RNG4 SH1[ 3.406349] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)[ 3.411942] caam 2140000.caam: device ID = 0x0a160300 (Era 8)[ 3.417731] caam 2140000.caam: job rings = 3, qi = 0[ 3.425245] mmc1: new SDIO card at address 0001[ 3.433187] wl1271_sdio mmc1:0001:2: legacy platform data not found, trying device tree[ 3.557476] caam algorithms registered in /proc/crypto[ 3.568192] caam_jr 2141000.jr0: registering rng-caam[ 3.575495] platform caam_sm: blkkey_ex: 8 keystore units available[ 3.582287] platform caam_sm: 64-bit clear key:[ 3.586876] platform caam_sm: [0000] 00 01 02 03 04 0f 06 07[ 3.593044] platform caam_sm: 64-bit black key:[ 3.597632] platform caam_sm: [0000] 88 e6 66 fb fc 76 aa 9f[ 3.603444] platform caam_sm: [0008] 6a d2 37 ea 53 ff 7f 26[ 3.609224] platform caam_sm: 128-bit clear key:[ 3.613889] platform caam_sm: [0000] 00 01 02 03 04 0f 06 07[ 3.619716] platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f[ 3.625411] platform caam_sm: 128-bit black key:[ 3.630105] platform caam_sm: [0000] d6 cb 8d ed 8f 0e 84 c7[ 3.635807] platform caam_sm: [0008] 37 e0 0c 61 0d a2 7b ec[ 3.641583] platform caam_sm: 192-bit clear key:[ 3.646247] platform caam_sm: [0000] 00 01 02 03 04 0f 06 07[ 3.651984] platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f[ 3.657684] platform caam_sm: [0016] 10 11 12 13 14 15 16 17[ 3.663407] platform caam_sm: 192-bit black key:[ 3.668064] platform caam_sm: [0000] 51 36 f4 90 91 0d 87 66[ 3.673790] platform caam_sm: [0008] a0 70 1d cf 4c 6c 39 21[ 3.679517] platform caam_sm: [0016] af f8 77 77 44 bf cd 21[ 3.685214] platform caam_sm: [0024] 15 07 24 01 24 f1 c7 31[ 3.690929] platform caam_sm: 256-bit clear key:[ 3.695585] platform caam_sm: [0000] 00 01 02 03 04 0f 06 07[ 3.701312] platform caam_sm: [0008] 08 09 0a 0b 0c 0d 0e 0f[ 3.707010] platform caam_sm: [0016] 10 11 12 13 14 15 16 17[ 3.712733] platform caam_sm: [0024] 18 19 1a 1b 1c 1d 1e 1f[ 3.718452] platform caam_sm: 256-bit black key:[ 3.723112] platform caam_sm: [0000] 90 6a 4c 00 d4 99 d7 df[ 3.728838] platform caam_sm: [0008] 86 bb c3 1c 60 5b 25 04[ 3.734538] platform caam_sm: [0016] ac d9 96 c6 2c fc 26 79[ 3.740262] platform caam_sm: [0024] e2 13 7a 84 89 bc a5 89[ 3.745949] platform caam_sm: 64-bit unwritten blob:[ 3.750979] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 3.756679] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 3.762402] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 3.768099] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 3.773822] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 3.779550] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 3.785248] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 3.790984] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 3.796687] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 3.802420] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 3.808118] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 3.813845] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 3.819564] platform caam_sm: 128-bit unwritten blob:[ 3.824656] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 3.830383] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 3.836083] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 3.841812] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 3.847512] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 3.853235] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 3.858958] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 3.864655] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 3.870379] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 3.876077] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 3.881802] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 3.887498] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 3.893216] platform caam_sm: 196-bit unwritten blob:[ 3.898309] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 3.904032] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 3.909756] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 3.915456] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 3.921182] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 3.926878] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 3.932603] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 3.938302] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 3.944026] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 3.949751] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 3.955447] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 3.961171] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 3.966859] platform caam_sm: 256-bit unwritten blob:[ 3.971979] platform caam_sm: [0000] 00 00 00 00 00 00 00 00[ 3.977677] platform caam_sm: [0008] 00 00 00 00 00 00 00 00[ 3.983403] platform caam_sm: [0016] 00 00 00 00 00 00 00 00[ 3.989128] platform caam_sm: [0024] 00 00 00 00 00 00 00 00[ 3.994824] platform caam_sm: [0032] 00 00 00 00 00 00 00 00[ 4.000550] platform caam_sm: [0040] 00 00 00 00 00 00 00 00[ 4.006249] platform caam_sm: [0048] 00 00 00 00 00 00 00 00[ 4.011993] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 4.017694] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 4.023424] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 4.029146] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 4.034843] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 4.040846] platform caam_sm: 64-bit black key in blob:[ 4.046125] platform caam_sm: [0000] 8d 95 5d f4 8a 59 05 eb[ 4.051921] platform caam_sm: [0008] cb bb e0 24 5a d8 b7 8f[ 4.057626] platform caam_sm: [0016] 90 98 97 8e 94 8b d1 db[ 4.063364] platform caam_sm: [0024] 95 d7 07 49 3f e0 f4 d0[ 4.069096] platform caam_sm: [0032] 0c 1d 12 19 f8 85 58 fd[ 4.074798] platform caam_sm: [0040] 0b 8d b2 86 cd fc d4 03[ 4.080524] platform caam_sm: [0048] 38 4c c6 ae 76 1c de 58[ 4.086223] platform caam_sm: [0056] 00 00 00 00 00 00 00 00[ 4.091946] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 4.097642] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 4.103366] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 4.109093] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 4.114783] platform caam_sm: 128-bit black key in blob:[ 4.120166] platform caam_sm: [0000] 55 66 aa 80 2b 1c 38 b7[ 4.125862] platform caam_sm: [0008] 4a 9b 3f 29 a3 e9 43 47[ 4.131587] platform caam_sm: [0016] 3b 4d 26 03 5a 3d e2 6d[ 4.137284] platform caam_sm: [0024] 73 6f d3 3b 25 ec bb 98[ 4.143007] platform caam_sm: [0032] 44 38 c9 9b a9 94 c6 0b[ 4.148733] platform caam_sm: [0040] cd 57 15 e6 e6 ad 30 e9[ 4.154431] platform caam_sm: [0048] 67 a0 02 be ab 5a 4a e9[ 4.160156] platform caam_sm: [0056] 18 ac bb ba ed 2c f4 8d[ 4.165854] platform caam_sm: [0064] 00 00 00 00 00 00 00 00[ 4.171581] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 4.177279] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 4.183004] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 4.188719] platform caam_sm: 192-bit black key in blob:[ 4.194072] platform caam_sm: [0000] 34 63 18 9d 98 df 41 82[ 4.199801] platform caam_sm: [0008] b3 ee c9 9c 1d e3 c0 ff[ 4.205502] platform caam_sm: [0016] ff 24 44 e8 13 16 2c ea[ 4.211230] platform caam_sm: [0024] 65 e7 51 d4 8f 92 f2 0e[ 4.216928] platform caam_sm: [0032] 3c bb 90 25 1f ec f4 b5[ 4.222653] platform caam_sm: [0040] ad 91 f2 27 72 90 38 d7[ 4.228350] platform caam_sm: [0048] 85 21 69 46 48 24 ad 9f[ 4.234074] platform caam_sm: [0056] 58 d5 1b 34 ae 2e 5c 28[ 4.239805] platform caam_sm: [0064] 51 b7 b0 28 fd 8c 2d 62[ 4.245501] platform caam_sm: [0072] 00 00 00 00 00 00 00 00[ 4.251225] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 4.256927] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 4.262645] platform caam_sm: 256-bit black key in blob:[ 4.268000] platform caam_sm: [0000] ad 9f 86 08 d8 7e 60 eb[ 4.273730] platform caam_sm: [0008] 5b 2b ce b3 f0 2a c0 51[ 4.279457] platform caam_sm: [0016] 24 50 2b d9 b1 6f 14 80[ 4.285155] platform caam_sm: [0024] db 9d 5c a5 7e 45 ae 4d[ 4.290879] platform caam_sm: [0032] 2f 2f e5 e3 3d 70 c3 fa[ 4.296576] platform caam_sm: [0040] 94 85 09 bc f0 4e 56 3d[ 4.302303] platform caam_sm: [0048] ea 07 b6 8d 11 a3 9e 74[ 4.308001] platform caam_sm: [0056] 89 98 61 68 17 fc db c0[ 4.313725] platform caam_sm: [0064] 29 d4 2a 5f de 04 cd 61[ 4.319452] platform caam_sm: [0072] 27 19 45 a6 2d f3 eb 7e[ 4.325149] platform caam_sm: [0080] 00 00 00 00 00 00 00 00[ 4.330870] platform caam_sm: [0088] 00 00 00 00 00 00 00 00[ 4.336874] platform caam_sm: restored 64-bit black key:[ 4.342283] platform caam_sm: [0000] 3e 80 ad 16 20 dc 91 cd[ 4.347987] platform caam_sm: [0008] 2e af 2b 53 1b cd 7f e8[ 4.353721] platform caam_sm: restored 128-bit black key:[ 4.359197] platform caam_sm: [0000] d6 cb 8d ed 8f 0e 84 c7[ 4.364897] platform caam_sm: [0008] 37 e0 0c 61 0d a2 7b ec[ 4.370616] platform caam_sm: restored 192-bit black key:[ 4.376055] platform caam_sm: [0000] 51 36 f4 90 91 0d 87 66[ 4.381782] platform caam_sm: [0008] a0 70 1d cf 4c 6c 39 21[ 4.387479] platform caam_sm: [0016] 81 d5 50 13 b2 8e ab 58[ 4.393203] platform caam_sm: [0024] f3 86 84 d7 86 7a 41 ca[ 4.398924] platform caam_sm: restored 256-bit black key:[ 4.404363] platform caam_sm: [0000] 90 6a 4c 00 d4 99 d7 df[ 4.410091] platform caam_sm: [0008] 86 bb c3 1c 60 5b 25 04[ 4.415791] platform caam_sm: [0016] ac d9 96 c6 2c fc 26 79[ 4.421518] platform caam_sm: [0024] e2 13 7a 84 89 bc a5 89[ 4.427780] snvs-secvio 20cc000.caam-snvs: can't get snvs clock[ 4.433869] snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state[ 4.442756] usbcore: registered new interface driver usbhid[ 4.448369] usbhid: USB HID core driver[ 4.461740] fsl-asrc 2034000.asrc: driver registered[ 4.476973] NET: Registered protocol family 26[ 4.481644] Netfilter messages via NETLINK v0.30.[ 4.486437] nfnl_acct: registering with nfnetlink.[ 4.491417] nf_conntrack version 0.5.0 (7916 buckets, 31664 max)[ 4.498829] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>[ 4.505570] xt_time: kernel timezone is -0000[ 4.510698] ip_tables: (C) 2000-2006 Netfilter Core Team[ 4.516245] arp_tables: (C) 2002 David S. Miller[ 4.521053] TCP: cubic registered[ 4.525780] NET: Registered protocol family 10[ 4.532415] sit: IPv6 over IPv4 tunneling driver[ 4.538937] NET: Registered protocol family 17[ 4.543464] can: controller area network core (rev 20120528 abi 9)[ 4.549930] NET: Registered protocol family 29[ 4.554415] can: raw protocol (rev 20120528)[ 4.558762] can: broadcast manager protocol (rev 20120528 t)[ 4.564472] can: netlink gateway (rev 20130117) max_hops=1[ 4.570710] Bluetooth: RFCOMM TTY layer initialized[ 4.575671] Bluetooth: RFCOMM socket layer initialized[ 4.581094] Bluetooth: RFCOMM ver 1.11[ 4.584906] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 4.590298] Bluetooth: BNEP filters: protocol multicast[ 4.595581] Bluetooth: BNEP socket layer initialized[ 4.600614] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 4.606583] Bluetooth: HIDP socket layer initialized[ 4.611734] 8021q: 802.1Q VLAN Support v1.8[ 4.616071] Key type dns_resolver registered[ 4.622012] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19)[ 4.652276] SWBST: disabling[ 4.655215] usb_otg1_vbus: disabling[ 4.658941] regulator-dummy: disabling[ 4.663256] imx mcc test is registered.[ 4.669280] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1)[ 4.698300] ALSA device list:[ 4.701426] No soundcards found.[ 4.720777] kjournald starting. Commit interval 5 seconds[ 5.107209] EXT3-fs (mmcblk0p2): using internal journal[ 5.112604] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode[ 5.119599] VFS: Mounted root (ext3 filesystem) on device 179:2.[ 5.~~125035~~129638] devtmpfs: mounted[ 5.~~128943~~133435] Freeing unused kernel memory: 408K (~~80b15000~~ 80b30000 - ~~80b7b000~~80b96000)[ 5.~~751274~~754461] systemd[1]: System time before build time, advancing clock.[ 5.~~783486~~793204] systemd[1]: Failed to insert module 'kdbus': Function not ~~imp~~implemented[ 5.~~823801~~840739] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)[ 5.~~843563~~860434] systemd[1]: Detected architecture arm.

Welcome to Debian GNU/Linux 8 (jessie)!

[ 5.~~880235~~893284] systemd[1]: Set hostname to <arm>.[ 6.~~727889~~793575] systemd[1]: Listening on udev Control Socket.

[ OK ] Listening on udev Control Socket.

[ 6.~~758625~~819361] systemd[1]: Listening on ~~Journal~~ udev Kernel Socket ~~(/dev/log)~~.[ OK ] Listening on ~~Journal~~ udev Kernel Socket ~~(/dev/log)~~.[ 6.~~788119] systemd[1]: Reached target Encrypted Volumes.[ OK ] Reached target Encrypted Volumes.[ 6.818418~~849399] systemd[1]: Listening on Syslog Socket.

[ OK ] Listening on Syslog Socket.

[ 6.~~839082~~869027] systemd[1]: Reached target Swap.[ OK ] Reached target Swap.[ 6.889673] systemd[1]: Created slice System Slice.[ OK ] Created slice System Slice.[ 6.910861] systemd[1]: Created slice system-getty.slice.[ OK ] Created slice system-getty.slice.[ 6.940329] systemd[1]: Created slice system-serial\x2dgetty.slice.[ OK ] Created slice system-serial\x2dgetty.slice.[ 6.969405] systemd[1]: Reached target Remote File Systems (Pre).

[ OK ] Reached target Remote File Systems (Pre).

[ 6.~~869354~~999342] systemd[1]: ~~Started Forward Password Requests to Wall Directo~~Reached target Remote File Systems.[ OK ] ~~Started Forward Password Requests to Wall Directory Watch.[ 6.901334] systemd[1]: Set up automount Arbitrary Executable~~ Reached target Remote File ~~Format[ OK ] Set up automount Arbitrary Executab~~Systems.~~..ats File System Automount Poi~~[ 67.~~939313~~029982] systemd[1]: Listening on /dev/initctl Compatibility Named ~~Pip~~Pipe.

[ OK ] Listening on /dev/initctl Compatibility Named Pipe.

~~[ 6.968527] systemd[1]: Reached target Remote File Systems.[ OK ] Reached target Remote File Systems.[ 6.999801] systemd[1]: Reached target Swap.[ OK ] Reached target Swap.~~[ 7.~~019678~~060031] systemd[1]: Created slice ~~System~~ User and Session Slice.[ OK ] Created slice ~~System~~ User and Session Slice.[ 7.~~038667~~089399] systemd[1]: Reached target Slices.

[ OK ] Reached target Slices.

[ 7.~~059455] systemd[1]: Created slice system-serial\x2dgetty.slice.[ OK ] Created slice system-serial\x2dgetty.slice.[ 7.089497] systemd[1]: Created slice system-getty.slice.[ OK ] Created slice system-getty.slice.[ 7.119398~~110139] systemd[1]: Listening on Journal Socket.

[ OK ] Listening on Journal Socket.

[ 7.~~145290~~152479] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules...[ 7.192788] systemd[1]: Mounting Debug File System... Mounting Debug File System...[ 7.232732] systemd[1]: Starting Create Static Device Nodes in /dev... Starting Create Static Device Nodes in /dev...[ 7.308977] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems...[ 7.324509] systemd[1]: Listening on Journal Socket (/dev/log).[ OK ] Listening on Journal Socket (/dev/log).[ 7.373285] systemd[1]: Starting Journal Service...

Starting Journal Service...

[ 7.~~182154~~411297] systemd[1]: ~~Starting Remount Root and Kernel~~ Set up automount Arbitrary Executable File ~~Systems~~Formats File System Automount Point.[ OK ] Set up automount Arbitrary Executab.. ~~Starting Remount Root and Kernel~~ .ats File ~~Systems..~~System Automount Point.[ 7.~~241987~~477276] systemd[1]: ~~Mounting Debug File System..~~Started Forward Password Requests to Wall Directory Watch. ~~Mounting Debug File System..~~[ OK ] Started Forward Password Requests to Wall Directory Watch.[ 7.~~308585~~529053] systemd[1]: ~~Starting Load Kernel Modules..~~Reached target Encrypted Volumes. ~~Starting Load Kernel Modules..~~[ OK ] Reached target Encrypted Volumes.[ 7.~~364001~~549681] systemd[1]: Started Dispatch Password Requests to Console ~~Dir~~Directory Watch.

[ OK ] Started Dispatch Password Requests to Console Directory Watch.

[ 7.~~418164~~579006] systemd[1]: Reached target Paths.

[ OK ] Reached target Paths.

[ 7.~~451915] systemd[1]: Starting Create Static Device Nodes in /dev...~~ ~~Starting Create Static Device Nodes in /dev...[ 7.508441] systemd[1]: Listening on udev Kernel Socket.[ OK ] Listening on udev Kernel Socket.[ 7.528001] systemd[1]: Reached target Sockets.[ OK ] Reached target Sockets.[ 7.558251~~593796] systemd[1]: Mounted Debug File System.

[ OK ] Mounted Debug File System.

[ 7.~~589958] systemd[1]: Started Remount Root and Kernel File Systems.[ OK ] Started Remount Root and Kernel File Systems.[ 7.651199~~630692] systemd[1]: Started Load Kernel Modules.

[ OK ] Started Load Kernel Modules.

[ 7.~~680384~~684582] systemd[1]: Started Create Static Device Nodes in /dev.

[ OK ] Started Create Static Device Nodes in /dev.

[ 7.~~716855~~720664] systemd[1]: Started Remount Root and Kernel File Systems.[ OK ] Started Remount Root and Kernel File Systems.[ 7.746364] systemd[1]: Starting Load/Save Random Seed... Starting Load/Save Random Seed...[ 7.796806] systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices...[ 7.852274] systemd[1]: Starting udev Kernel Device Manager...

Starting udev Kernel Device Manager...

[ 7.~~780271] systemd[1]: Starting Apply Kernel Variables...~~ ~~Starting Apply Kernel Variables...[ 7.821035] systemd[1]: Mounting FUSE Control File System...~~ ~~Mounting FUSE Control File System...[ 7.909856] systemd[1]: Starting udev Coldplug all Devices...~~ ~~Starting udev Coldplug all Devices...[ 7.932630~~928911] systemd[1]: Reached target Local File Systems (Pre).

[ OK ] Reached target Local File Systems (Pre).

[ 87.~~001492] systemd[1]: Starting Load/Save Random Seed...~~ ~~Starting Load/Save Random Seed...[ 8.058300~~969049] systemd[1]: Reached target Local File Systems.

[ OK ] Reached target Local File Systems.

[ 7.998902] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System...[ 8.082205] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables...[ 8.~~114063~~170411] systemd[1]: Mounted FUSE Control File System.

[ OK ] Mounted FUSE Control File System.

[ 8.~~179693~~201728] systemd[1]: Started Load/Save Random Seed.[ OK ] Started Load/Save Random Seed.[ 8.261146] systemd[1]: Started Apply Kernel Variables.[ OK ] Started Apply Kernel Variables.[ 8.310956] systemd[1]: Started udev Kernel Device Manager.

[ OK ] Started udev Kernel Device Manager.

[ 8.~~210239] systemd[1]: Started Apply Kernel Variables.[ OK ] Started Apply Kernel Variables.[ 8.251215] systemd[1]: Started Load/Save Random Seed.[ OK ] Started Load/Save Random Seed.[ 8.295404~~354235] systemd[1]: Starting Raise network interfaces...

Starting Raise network interfaces...

[ 9.~~378588~~322029] systemd[1]: Started Journal Service.

[ OK ] Started Journal Service.

Starting Flush Journal to Persistent Storage...

[ 10.~~329376~~519125] systemd-journald[~~134~~140]: Received request to flush runtime ~~jour~~journal from PID 1

[ OK ] Started Flush Journal to Persistent Storage.

Starting Create Volatile Files and Directories...

[ 14.858928] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Micrel KSZ8081 or KSZ8091] (mii_bus:phy_addr=2188000.ethernet:03, irq=-1)

[ OK ] Started udev Coldplug all Devices.

[ 14.989292] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ OK ] Started Create Volatile Files and Directories.

Starting Network Time Synchronization...

Starting Update UTMP about System Boot/Shutdown...

[ OK ] Started ~~udev Coldplug all Devices~~Network Time Synchronization.~~[ 21.038081] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Micrel K[ 21.188538] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready~~

[ OK ] Started Update UTMP about System Boot/Shutdown.

~~[ OK ] Started Network Time Synchronization.~~

[ OK ] Reached target System Initialization.

[ OK ] Listening on D-Bus System Message Bus Socket.

[ OK ] Reached target Sockets.

[ OK ] Reached target Basic System.

[ OK ] Started Regular background program processing daemon.

Starting isdnutils-base.service...

Starting Generic Board Startup...

Starting Cape Manager Service...

Starting Restore /etc/resolv.conf i...e the ppp link was shut down....

Starting System Logging Service...

Starting ~~getty on tty2-tty6 if dbus and logind are not available~~Login Service...

[ OK ] Started Daily Cleanup of Temporary Directories.

[ OK ] Reached target Timers.

~~Starting Generic Board Startup~~[ OK ] Started D-Bus System Message Bus.[ 18.859213] libphy: 2188000.ethernet:03 - Link is Up - 100/Full[ 18.865209] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ OK ] Reached target System Time Synchronized.

[ OK ] Started System Logging Service.

[FAILED] Failed to start Generic Board Startup.

See 'systemctl status generic-board-startup.service' for details.

[FAILED] Failed to start Cape Manager Service.

See 'systemctl status capemgr.service' for details.

[FAILED] Failed to start ~~Generic Board Startup~~Restore /etc/resolv...ore the ppp link was shut down..See 'systemctl status ~~generic~~pppd-~~board-startup~~dns.service' for details.~~[ OK ] Started System Logging Service.[ 25.038599] libphy: 2188000.ethernet:03 - Link is Up - 100/Full[ 25.044599] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready[ OK ] Started getty on tty2-tty6 if dbus and logind are not available~~.

[ OK ] Found device /dev/ttymxc0.

[ OK ] Started Login Service.

[ OK ] Started Raise network interfaces.

[ OK ] Reached target Network.

Starting Permit User Sessions...

[ OK ] Started OpenBSD Secure Shell server.

Starting /etc/rc.local Compatibility...

~~Starting~~ [ OK ] Started Permit User Sessions...

[ OK ] Started /etc/rc.local Compatibility.

~~[ OK ] Started Permit User Sessions.~~

~~[ OK ] Started Getty on tty6.~~

~~[ OK ] Started Getty on tty3.~~

[ OK ] Started Serial Getty on ttymxc0.

~~[ OK ] Started Getty on tty2.~~

[ OK ] Started Getty on tty1.

~~[ OK ] Started Getty on tty5.~~

~~[ OK ] Started Getty on tty4.~~

[ OK ] Reached target Login Prompts.

~~[ OK ] Reached target Multi-User System.~~

~~[ OK ] Reached target Graphical Interface.~~

~~Starting Update UTMP about System Runlevel Changes...~~

~~[ OK ] Started Update UTMP about System Runlevel Changes.~~

Debian GNU/Linux 8 ~~arm ttymxc0~~

~~default username:password is [debian:temppwd]~~DAVE Embedded Systems (www.dave.eu)SBC Lynx

~~arm login~~Architecture: ~~root~~armv7l~~Password~~Hostname:arm~~Last login: Sun Jan 15 02~~Linux kernel:~~57:41 UTC 2017 on ttymxc0Linux arm~~ 3.14.52-xuelk-1.1.0 3 #7 3 SMP PREEMPT ~~Fri Nov 25 17~~Thu Mar 16 09:1528:33 51 CET ~~2016 ar~~2017

~~The programs included with the Debian GNU/Linux system are free software;the exact distribution terms for each program are described in theindividual files in /usr/share/doc/*/copyright.~~default username:password is [debian:debian]

~~Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extentpermitted by applicable law.root@~~armlogin:~#

</pre>

By default, two users are defined:

* user <code>debian</code>, password <code>~~temppwd~~debian</code>

* user <code>root</code>, password <code>root</code>

[1] The only difference with respect to the XUELK kernel image is related to the WiFi driver. To make it work with the Debian root file system, it has to be built as a loadable module instead as a statically linked driver.

[12] ~~These information are retrieved~~ The provided root file system is derived from this one: https://rcn-ee.com/rootfs/eewiki/barefs/debian-8.7-bare-armhf-2017-01-14.tar.xz.===Using the raw image===For convenience, the raw image of the microSD card is provided as well. This image is the result of the procedure described in the previous section, applied to a 16 GB card. The image can be downloaded [https://~~eewiki~~mirror.dave.~~net~~eu/lynx/~~display~~debian/~~linuxonarm~~20170403/~~Wandboard#Wandboard~~20170403-sbclynx-debian-8-~~RootFileSystem~~usd.zip here]. Once decompressed, it can be written directly to the card. On a Linux host issue the following command (~~smallflash~~assuming the card is associated to the <code>/dec/sdc</code> device file) :<pre class="board-terminal">sudo dd if=/path/to/20170403-sbclynx-debian-8-usd.img of=/dev/sdc oflag=sync</pre> In case your host is a Windows machine, you can use the well-known ''Win32 Disk Imager'' tool. It can be downloaded [https://sourceforge.net/projects/win32diskimager/ here]. [[File:Sbclynx-debian-disk-imager-win.png|thumb|center|600px|''Win32 Disk Imager'' tool]] After installing it, open it and (see also the image above):#select the raw image file#select the drive letter of the microSD card#press ''Write''.

==Adding packages==

Of course, one of the greatest - if not ''the'' greatest - pros of having a desktop distribution, is the availability of a huge archive of pre-built packages. They can be installed very easily with tools such as [https://wiki.debian.org/Apt <code>apt</code>] and [https://packaging.python.org <code>pip</code>].

Before installing packages, the network interface has to be configured, as it is disabled by default. To configure it with a static IP address (192.168.0.80 in the example), <code>nano</code> text editor can be used:

[ Wrote 9 lines ]

</pre>

Please note ~~the~~ that these changes will take effect after rebooting the machine.

DNS server has also to be enabled, in order to resolve URLs. Again, <code>nano</code> comes to help:

</pre>

You can finally install the desired packages, as shown in the following examples:

Successfully installed autobahn six txaio

Cleaning up...

</pre>

===List of installed packages===

====deb packages====

Please click on the ''Expand'' button to see the list of the installed deb packages.

root@arm:~# dpkg -l

Desired=Unknown/Install/Remove/Purge/Hold

| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend

|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)

||/ Name Version Architecture Description

+++-==============-============-============-=================================

ii acl 2.2.52-2 armhf Access control list utilities

ii adduser 3.113+nmu3 all add and remove users and groups

ii apt 1.0.9.8.4 armhf commandline package manager

ii apt-file 2.5.4 all search for files within Debian pa

ii apt-utils 1.0.9.8.4 armhf package management related utilit

ii base-files 8+deb8u7 armhf Debian base system miscellaneous

ii base-passwd 3.5.37 armhf Debian base system master passwor

ii bash 4.3-11+deb8u armhf GNU Bourne Again SHell

ii bash-completio 1:2.1-4 all programmable completion for the b

ii bind9-host 1:9.9.5.dfsg armhf Version of 'host' bundled with BI

ii binutils 2.25-5 armhf GNU assembler, linker and binary

ii bluez 5.23-2+b1 armhf Bluetooth tools and daemons

ii bluez-obexd 5.23-2+b1 armhf bluez obex daemon

ii bluez-tools 0.2.0~201408 armhf Set of tools to manage Bluetooth

ii bridge-utils 1.5-9 armhf Utilities for configuring the Lin

ii bsdmainutils 9.0.6 armhf collection of more utilities from

ii bsdutils 1:2.25.2-6 armhf basic utilities from 4.4BSD-Lite

ii build-essentia 11.7 armhf Informational list of build-essen

ii bzip2 1.0.6-7+b3 armhf high-quality block-sorting file c

ii ca-certificate 20141019+deb all Common CA certificates

ii command-not-fo 0.2.38-1 all Suggest installation of packages

ii coreutils 8.23-4 armhf GNU core utilities

ii cpio 2.11+dfsg-4. armhf GNU cpio -- a program to manage a

ii cpp 4:4.9.2-2 armhf GNU C preprocessor (cpp)

ii cpp-4.9 4.9.2-10 armhf GNU C preprocessor

ii crda 3.13-1 armhf wireless Central Regulatory Domai

ii cron 3.0pl1-127+d armhf process scheduling daemon

ii curl 7.38.0-4+deb armhf command line tool for transferrin

ii dash 0.5.7-4+b1 armhf POSIX-compliant shell

ii dbus 1.8.22-0+deb armhf simple interprocess messaging sys

ii dc 1.06.95-9 armhf GNU dc arbitrary precision revers

ii debconf 1.5.56 all Debian configuration management s

ii debconf-i18n 1.5.56 all full internationalization support

ii debian-archive 2014.3 all GnuPG archive keys of the Debian

ii debianutils 4.4+b1 armhf Miscellaneous utilities specific

ii diffutils 1:3.3-1+b1 armhf File comparison utilities

ii dmsetup 2:1.02.90-2. armhf Linux Kernel Device Mapper usersp

ii dnsutils 1:9.9.5.dfsg armhf Clients provided with BIND

ii dos2unix 6.0.4-1 armhf convert text file line endings be

ii dosfstools 3.0.27-1 armhf utilities for making and checking

ii dpkg 1.17.27 armhf Debian package management system

ii dpkg-dev 1.17.27 all Debian package development tools

ii e2fslibs:armhf 1.43-3~bpo8+ armhf ext2/ext3/ext4 file system librar

ii e2fsprogs 1.43-3~bpo8+ armhf ext2/ext3/ext4 file system utilit

ii elvis-tiny 1.4-23 armhf Tiny vi compatible editor for the

ii fakeroot 1.20.2-1 armhf tool for simulating superuser pri

ii file 1:5.22+15-2+ armhf Determines file type using "magic

ii findutils 4.4.2-9+b1 armhf utilities for finding files--find

ii firmware-ti-co 20161130-2 all Binary firmware for TI Connectivi

ii fuse 2.9.3-15+deb armhf Filesystem in Userspace

ii fuse2fs 1.43-3~bpo8+ armhf ext2 / ext3 / ext4 file system dr

ii g++ 4:4.9.2-2 armhf GNU C++ compiler

ii g++-4.9 4.9.2-10 armhf GNU C++ compiler

ii gcc 4:4.9.2-2 armhf GNU C compiler

ii gcc-4.8-base:a 4.8.4-1 armhf GCC, the GNU Compiler Collection

ii gcc-4.9 4.9.2-10 armhf GNU C compiler

ii gcc-4.9-base:a 4.9.2-10 armhf GCC, the GNU Compiler Collection

ii geoip-database 20150317-1 all IP lookup command line tools that

ii gnupg 1.4.18-7+deb armhf GNU privacy guard - a free PGP re

ii gpgv 1.4.18-7+deb armhf GNU privacy guard - signature ver

ii grep 2.20-4.1 armhf GNU grep, egrep and fgrep

rc groff-base 1.22.2-8 armhf GNU troff text-formatting system

ii gzip 1.6-4 armhf GNU compression utilities

ii hostname 3.15 armhf utility to set/show the host name

ii htop 1.0.3-1 armhf interactive processes viewer

ii ifupdown 0.8.13~bpo8+ armhf high level tools to configure net

ii inetutils-teln 2:1.9.2.39.3 armhf telnet client

ii init 1.22 armhf System-V-like init utilities - me

ii init-system-he 1.22 all helper tools for all init systems

ii initscripts 2.88dsf-59 armhf scripts for initializing and shut

ii insserv 1.14.0-5 armhf boot sequence organizer using LSB

ii ipcalc 0.41-4 all parameter calculator for IPv4 add

ii iperf 2.0.5+dfsg1- armhf Internet Protocol bandwidth measu

ii ipppd 1:3.25+dfsg1 armhf ISDN utilities - PPP daemon

ii iproute2 3.16.0-2 armhf networking and traffic control to

ii iptables 1.4.21-2+b1 armhf administration tools for packet f

ii iputils-ping 3:20121221-5 armhf Tools to test the reachability of

ii isc-dhcp-clien 4.3.1-6+deb8 armhf DHCP client for automatically obt

ii isc-dhcp-commo 4.3.1-6+deb8 armhf common files used by all of the i

ii isdnutils-base 1:3.25+dfsg1 armhf ISDN utilities - minimal set

ii iw 3.17-1 armhf tool for configuring Linux wirele

ii kmod 18-3 armhf tools for managing Linux kernel m

ii krb5-locales 1.12.1+dfsg- all Internationalization support for

ii less 458-3 armhf pager program similar to more

ii libacl1:armhf 2.2.52-2 armhf Access control list shared librar

ii libalgorithm-c 0.09-1 all Perl module for merging hierarchi

ii libalgorithm-d 1.19.02-3 all module to find differences betwee

ii libalgorithm-d 0.04-3+b1 armhf module to find differences betwee

ii libalgorithm-m 0.08-2 all Perl module for three-way merge o

ii libapparmor1:a 2.10.95-4~bp armhf changehat AppArmor library

ii libapt-inst1.5 1.0.9.8.4 armhf deb package format runtime librar

ii libapt-pkg-per 0.1.29+b2 armhf Perl interface to libapt-pkg

ii libapt-pkg4.12 1.0.9.8.4 armhf package management runtime librar

ii libarchive-ext 0.72-1 all generic archive extracting module

ii libasan1:armhf 4.9.2-10 armhf AddressSanitizer -- a fast memory

rc libatasmart4:a 0.19-3 armhf ATA S.M.A.R.T. reading and parsin

ii libatomic1:arm 4.9.2-10 armhf support library providing __atomi

ii libattr1:armhf 1:2.4.47-2 armhf Extended attribute shared library

ii libaudit-commo 1:2.4-1 all Dynamic library for security audi

ii libaudit1:armh 1:2.4-1+b1 armhf Dynamic library for security audi

ii libbind9-90 1:9.9.5.dfsg armhf BIND9 Shared Library used by BIND

ii libblkid1:armh 2.25.2-6 armhf block device id library

ii libbsd0:armhf 0.7.0-2 armhf utility functions from BSD system

ii libbz2-1.0:arm 1.0.6-7+b3 armhf high-quality block-sorting file c

ii libc-bin 2.19-18+deb8 armhf GNU C Library: Binaries

ii libc-dev-bin 2.19-18+deb8 armhf GNU C Library: Development binari

ii libc6:armhf 2.19-18+deb8 armhf GNU C Library: Shared libraries

ii libc6-dev:armh 2.19-18+deb8 armhf GNU C Library: Development Librar

ii libcap-ng0:arm 0.7.4-2 armhf An alternate POSIX capabilities l

ii libcap2:armhf 1:2.24-8 armhf POSIX 1003.1e capabilities (libra

ii libcap2-bin 1:2.24-8 armhf POSIX 1003.1e capabilities (utili

ii libcgi-fast-pe 1:2.04-1 all CGI subclass for work with FCGI

ii libcgi-pm-perl 4.09-1 all module for Common Gateway Interfa

ii libclass-c3-pe 0.26-1 all pragma for using the C3 method re

ii libclass-c3-xs 0.13-2+b1 armhf Perl module to accelerate Class::

ii libcloog-isl4: 0.18.2-1+b2 armhf Chunky Loop Generator (runtime li

ii libcomerr2:arm 1.43-3~bpo8+ armhf common error description library

ii libconfig-file 1.50-2 all Parses simple configuration files

ii libcpan-meta-p 2.142690-1 all Perl module to access CPAN distri

ii libcryptsetup4 2:1.6.6-5 armhf disk encryption support - shared

ii libcurl3:armhf 7.38.0-4+deb armhf easy-to-use client-side URL trans

ii libdata-optlis 0.109-1 all module to parse and validate simp

ii libdata-sectio 0.200006-1 all module to read chunks of data fro

ii libdb5.3:armhf 5.3.28-9 armhf Berkeley v5.3 Database Libraries

ii libdbus-1-3:ar 1.8.22-0+deb armhf simple interprocess messaging sys

ii libdebconfclie 0.192 armhf Debian Configuration Management S

ii libdevmapper1. 2:1.02.90-2. armhf Linux Kernel Device Mapper usersp

ii libdns-export1 1:9.9.5.dfsg armhf Exported DNS Shared Library

ii libdns100 1:9.9.5.dfsg armhf DNS Shared Library used by BIND

ii libdpkg-perl 1.17.27 all Dpkg perl modules

ii libedit2:armhf 3.1-20140620 armhf BSD editline and history librarie

ii libelfg0:armhf 0.8.13-5 armhf an ELF object file access library

ii libestr0 0.1.9-1.1 armhf Helper functions for handling str

ii libexpat1:armh 2.1.0-6+deb8 armhf XML parsing C library - runtime l

ii libexpat1-dev: 2.1.0-6+deb8 armhf XML parsing C library - developme

ii libfakeroot:ar 1.20.2-1 armhf tool for simulating superuser pri

ii libfcgi-perl 0.77-1+deb8u armhf helper module for FastCGI

ii libffi-dev:arm 3.1-2+b2 armhf Foreign Function Interface librar

ii libffi6:armhf 3.1-2+b2 armhf Foreign Function Interface librar

ii libfile-fcntll 0.22-1+b1 armhf Perl module for file locking with

ii libfuse2:armhf 2.9.3-15+deb armhf Filesystem in Userspace (library)

ii libgcc-4.9-dev 4.9.2-10 armhf GCC support library (development

ii libgcc1:armhf 1:4.9.2-10 armhf GCC support library

ii libgcrypt20:ar 1.6.3-2+deb8 armhf LGPL Crypto library - runtime lib

ii libgdbm3:armhf 1.8.3-13.1 armhf GNU dbm database routines (runtim

ii libgeoip1:armh 1.6.2-4 armhf non-DNS IP-to-country resolver li

ii libglib2.0-0:a 2.42.1-1+b1 armhf GLib library of C routines

ii libglib2.0-bin 2.42.1-1+b1 armhf Programs for the GLib library

ii libglib2.0-dat 2.42.1-1 all Common files for GLib library

ii libglib2.0-dev 2.42.1-1+b1 armhf Development files for the GLib li

ii libgmp10:armhf 2:6.0.0+dfsg armhf Multiprecision arithmetic library

ii libgnutls-deb0 3.3.8-6+deb8 armhf GNU TLS library - main runtime li

ii libgnutls-open 3.3.8-6+deb8 armhf GNU TLS library - OpenSSL wrapper

ii libgomp1:armhf 4.9.2-10 armhf GCC OpenMP (GOMP) support library

ii libgpg-error0: 1.17-3 armhf library for common error values a

ii libgssapi-krb5 1.12.1+dfsg- armhf MIT Kerberos runtime libraries -

rc libgudev-1.0-0 215-17+deb8u armhf GObject-based wrapper library for

ii libhogweed2:ar 2.7.1-5+deb8 armhf low level cryptographic library (

ii libical1a 1.0-1.3 armhf iCalendar library implementation

ii libicu52:armhf 52.1-8+deb8u armhf International Components for Unic

ii libidn11:armhf 1.29-1+deb8u armhf GNU Libidn library, implementatio

ii libirs-export9 1:9.9.5.dfsg armhf Exported IRS Shared Library

ii libisc-export9 1:9.9.5.dfsg armhf Exported ISC Shared Library

ii libisc95 1:9.9.5.dfsg armhf ISC Shared Library used by BIND

ii libisccc90 1:9.9.5.dfsg armhf Command Channel Library used by B

ii libisccfg-expo 1:9.9.5.dfsg armhf Exported ISC CFG Shared Library

ii libisccfg90 1:9.9.5.dfsg armhf Config File Handling Library used

ii libisl10:armhf 0.12.2-2 armhf manipulating sets and relations o

ii libjson-c2:arm 0.11-4 armhf JSON manipulation library - share

ii libk5crypto3:a 1.12.1+dfsg- armhf MIT Kerberos runtime libraries -

ii libkeyutils1:a 1.5.9-5+b1 armhf Linux Key Management Utilities (l

ii libkmod2:armhf 18-3 armhf libkmod shared library

ii libkrb5-3:armh 1.12.1+dfsg- armhf MIT Kerberos runtime libraries

ii libkrb5support 1.12.1+dfsg- armhf MIT Kerberos runtime libraries -

ii libldap-2.4-2: 2.4.40+dfsg- armhf OpenLDAP libraries

ii liblist-moreut 0.33-2+b1 armhf Perl module with additional list

ii liblocale-gett 1.05-8+b1 armhf module using libc functions for i

rc liblockfile1:a 1.09-6 armhf NFS-safe locking library

ii liblog-message 0.8-1 all powerful and flexible message log

ii liblog-message 0.10-2 all simplified interface to Log::Mess

ii liblogging-std 1.0.4-1 armhf easy to use and lightweight loggi

ii liblognorm1:ar 1.0.1-3 armhf Log normalizing library

ii liblwres90 1:9.9.5.dfsg armhf Lightweight Resolver Library used

ii liblzma5:armhf 5.1.1alpha+2 armhf XZ-format compression library

ii liblzo2-2:armh 2.08-1.2 armhf data compression library

ii libmagic1:armh 1:5.22+15-2+ armhf File type determination library u

ii libmnl0:armhf 1.0.3-5 armhf minimalistic Netlink communicatio

ii libmodule-buil 0.421000-2+d all framework for building and instal

ii libmodule-plug 5.1-1 all module for giving modules the ab

ii libmodule-sign 0.73-1+deb8u all module to manipulate CPAN SIGNATU

ii libmount1:armh 2.25.2-6 armhf device mounting library

ii libmozjs185-1. 1.8.5-1.0.0+ armhf Spidermonkey javascript engine

ii libmpc3:armhf 1.0.2-1 armhf multiple precision complex floati

ii libmpfr4:armhf 3.1.2-2 armhf multiple precision floating-point

ii libmro-compat- 0.12-1 all mro::* interface compatibility fo

ii libncurses5:ar 5.9+20140913 armhf shared libraries for terminal han

ii libncursesw5:a 5.9+20140913 armhf shared libraries for terminal han

ii libnetfilter-a 1.0.2-1.1 armhf Netfilter acct library

ii libnettle4:arm 2.7.1-5+deb8 armhf low level cryptographic library (

ii libnfnetlink0: 1.0.1-3 armhf Netfilter netlink library

ii libnl-3-200:ar 3.2.24-2 armhf library for dealing with netlink

ii libnl-3-dev 3.2.24-2 armhf development library and headers f

ii libnl-genl-3-2 3.2.24-2 armhf library for dealing with netlink

ii libnl-genl-3-d 3.2.24-2 armhf development library and headers f

ii libnl-idiag-3- 3.2.24-2 armhf library for dealing with netlink

ii libnl-idiag-3- 3.2.24-2 armhf development library and headers f

ii libnspr4:armhf 2:4.12-1+deb armhf NetScape Portable Runtime Library

ii libp11-kit0:ar 0.20.7-1 armhf Library for loading and coordinat

ii libpackage-con 0.04-1 all List constants defined in a packa

ii libpam-modules 1.1.8-3.1+de armhf Pluggable Authentication Modules

ii libpam-runtime 1.1.8-3.1+de all Runtime support for the PAM libra

ii libpam-systemd 230-7~bpo8+2 armhf system and service manager - PAM

ii libpam0g:armhf 1.1.8-3.1+de armhf Pluggable Authentication Modules

ii libparams-util 1.07-2+b1 armhf Perl extension for simple stand-a

ii libparted2:arm 3.2-7 armhf disk partition manipulator - shar

ii libpcap0.8:arm 1.6.2-2 armhf system interface for user-level p

ii libpcre3:armhf 2:8.35-3.3+d armhf Perl 5 Compatible Regular Express

ii libpcre3-dev:a 2:8.35-3.3+d armhf Perl 5 Compatible Regular Express

ii libpcrecpp0:ar 2:8.35-3.3+d armhf Perl 5 Compatible Regular Express

ii libpcsclite1:a 1.8.13-1+deb armhf Middleware to access a smart card

ii libpod-latex-p 0.61-1 all module to convert Pod data to for

ii libpod-readme- 0.11-1 all Perl module to convert POD to REA

ii libpolkit-agen 0.113-2~bpo8 armhf PolicyKit Authentication Agent AP

ii libpolkit-gobj 0.113-2~bpo8 armhf PolicyKit Authorization API

ii libpopt0:armhf 1.16-10 armhf lib for parsing cmdline parameter

ii libprocps3:arm 2:3.3.9-9 armhf library for accessing process inf

ii libpsl0:armhf 0.5.1-1 armhf Library for Public Suffix List (s

ii libpython-dev: 2.7.9-1 armhf header files and a static library

ii libpython-stdl 2.7.9-1 armhf interactive high-level object-ori

ii libpython2.7:a 2.7.9-2+deb8 armhf Shared Python runtime library (ve

ii libpython2.7-d 2.7.9-2+deb8 armhf Header files and a static library

ii libpython2.7-m 2.7.9-2+deb8 armhf Minimal subset of the Python lang

ii libpython2.7-s 2.7.9-2+deb8 armhf Interactive high-level object-ori

ii libreadline6:a 6.3-8+b3 armhf GNU readline and history librarie

ii libregexp-asse 0.35-8 all Perl module that assemble multipl

ii libregexp-comm 2013031301-1 all module with common regular expres

ii librtmp1:armhf 2.4+20150115 armhf toolkit for RTMP streams (shared

ii libsasl2-2:arm 2.1.26.dfsg1 armhf Cyrus SASL - authentication abstr

ii libsasl2-modul 2.1.26.dfsg1 armhf Cyrus SASL - pluggable authentica

ii libseccomp2:ar 2.2.3-3~bpo8 armhf high level interface to Linux sec

ii libselinux1:ar 2.3-2 armhf SELinux runtime shared libraries

ii libsemanage-co 2.3-1 all Common files for SELinux policy m

ii libsemanage1:a 2.3-1+b1 armhf SELinux policy management library

ii libsepol1:armh 2.3-2 armhf SELinux library for manipulating

ii libshishi0 1.0.2-5 armhf Library for the Shishi Kerberos v

ii libslang2:armh 2.3.0-2 armhf S-Lang programming library - runt

ii libsmartcols1: 2.25.2-6 armhf smart column output alignment lib

ii libsoftware-li 0.103010-3 all module providing templated softwa

ii libsqlite3-0:a 3.8.7.1-1+de armhf SQLite 3 shared library

ii libss2:armhf 1.43-3~bpo8+ armhf command-line interface parsing li

ii libssh2-1:armh 1.4.3-4.1+de armhf SSH2 client-side library

ii libssl-dev:arm 1.0.1t-1+deb armhf Secure Sockets Layer toolkit - de

ii libssl-doc 1.0.1t-1+deb all Secure Sockets Layer toolkit - de

ii libssl1.0.0:ar 1.0.1t-1+deb armhf Secure Sockets Layer toolkit - sh

ii libstdc++-4.9- 4.9.2-10 armhf GNU Standard C++ Library v3 (deve

ii libstdc++6:arm 4.9.2-10 armhf GNU Standard C++ Library v3

ii libsub-exporte 0.986-1 all sophisticated exporter for custom

ii libsub-install 0.928-1 all module for installing subroutines

ii libsystemd0:ar 230-7~bpo8+2 armhf systemd utility library

ii libtasn1-6:arm 4.2-3+deb8u2 armhf Manage ASN.1 structures (runtime)

ii libterm-ui-per 0.42-1 all Term::ReadLine UI made easy

ii libtext-charwi 0.04-7+b4 armhf get display widths of characters

ii libtext-iconv- 1.7-5+b2 armhf converts between character sets i

ii libtext-sounde 3.4-1+b2 armhf implementation of the soundex alg

ii libtext-templa 1.46-1 all perl module to process text templ

ii libtext-wrapi1 0.06-7 all internationalized substitute of T

ii libtimedate-pe 2.3000-2 all collection of modules to manipula

ii libtinfo5:armh 5.9+20140913 armhf shared low-level terminfo library

ii libubsan0:armh 4.9.2-10 armhf UBSan -- undefined behaviour sani

ii libudev1:armhf 230-7~bpo8+2 armhf libudev shared library

rc libudisks2-0:a 2.1.3-5 armhf GObject based library to access u

ii libusb-0.1-4:a 2:0.1.12-25 armhf userspace USB programming library

ii libusb-1.0-0:a 2:1.0.19-1 armhf userspace USB programming library

ii libustr-1.0-1: 1.0.4-3+b2 armhf Micro string library: shared libr

ii libuuid1:armhf 2.25.2-6 armhf Universally Unique ID library

ii libwrap0:armhf 7.6.q-25 armhf Wietse Venema's TCP wrappers libr

ii libx11-6:armhf 2:1.6.2-3 armhf X11 client-side library

ii libx11-data 2:1.6.2-3 all X11 client-side library

ii libxau6:armhf 1:1.0.8-1 armhf X11 authorisation library

ii libxcb1:armhf 1.10-3+b1 armhf X C Binding

ii libxdmcp6:armh 1:1.1.1-1+b1 armhf X11 Display Manager Control Proto

ii libxext6:armhf 2:1.3.3-1 armhf X11 miscellaneous extension libra

ii libxml2:armhf 2.9.1+dfsg1- armhf GNOME XML library

ii libxmuu1:armhf 2:1.1.2-1 armhf X11 miscellaneous micro-utility l

ii libxtables10 1.4.21-2+b1 armhf netfilter xtables library

ii libyaml-0-2:ar 0.1.6-3 armhf Fast YAML 1.1 parser and emitter

ii libyaml-dev:ar 0.1.6-3 armhf Fast YAML 1.1 parser and emitter

ii linux-libc-dev 3.16.39-1 armhf Linux support headers for userspa

ii login 1:4.2-3+deb8 armhf system login tools

ii logrotate 3.8.7-1+b1 armhf Log rotation utility

ii lrzsz 0.12.21-7 armhf Tools for zmodem/xmodem/ymodem fi

ii lsb-base 4.1+Debian13 all Linux Standard Base 4.1 init scri

ii lsb-release 4.1+Debian13 all Linux Standard Base version repor

ii lzop 1.03-3 armhf fast compression program

ii make 4.0-8.1 armhf utility for directing compilation

ii makedev 2.3.1-93 all creates device files in /dev

ii manpages 3.74-1 all Manual pages about using a GNU/Li

ii manpages-dev 3.74-1 all Manual pages about using GNU/Linu

ii mawk 1.3.3-17 armhf a pattern scanning and text proce

ii mime-support 3.58 all MIME files 'mime.types' & 'mailca

ii minicom 2.7-1 armhf friendly menu driven serial commu

ii mount 2.25.2-6 armhf Tools for mounting and manipulati

ii multiarch-supp 2.19-18+deb8 armhf Transitional package to ensure mu

ii nano 2.2.6-3 armhf small, friendly text editor inspi

ii ncurses-base 5.9+20140913 all basic terminal type definitions

ii ncurses-bin 5.9+20140913 armhf terminal-related programs and man

ii ncurses-term 5.9+20140913 all additional terminal type definiti

ii net-tools 1.60-26+b1 armhf NET-3 networking toolkit

ii netbase 5.3 all Basic TCP/IP networking system

ii netcat-traditi 1.10-41 armhf TCP/IP swiss army knife

ii nfacct 1.0.1-1.1 armhf netfilter accounting object tool

rc ntfs-3g 1:2014.2.15A armhf read/write NTFS driver for FUSE

ii openssh-client 1:6.7p1-5+de armhf secure shell (SSH) client, for se

ii openssh-server 1:6.7p1-5+de armhf secure shell (SSH) server, for se

ii openssh-sftp-s 1:6.7p1-5+de armhf secure shell (SSH) sftp server mo

ii openssl 1.0.1t-1+deb armhf Secure Sockets Layer toolkit - cr

ii parted 3.2-7 armhf disk partition manipulator

ii passwd 1:4.2-3+deb8 armhf change and administer password an

ii patch 2.7.5-1 armhf Apply a diff file to an original

ii perl 5.20.2-3+deb armhf Larry Wall's Practical Extraction

ii perl-base 5.20.2-3+deb armhf minimal Perl system

ii perl-modules 5.20.2-3+deb all Core Perl modules

ii pkg-config 0.28-1 armhf manage compile and link flags for

rc pmount 0.9.23-3+b1 armhf mount removable devices as normal

ii policykit-1 0.113-2~bpo8 armhf framework for managing administra

ii ppp 2.4.6-3.1 armhf Point-to-Point Protocol (PPP) - d

ii procps 2:3.3.9-9 armhf /proc file system utilities

ii psmisc 22.21-2 armhf utilities that use the proc file

ii python 2.7.9-1 armhf interactive high-level object-ori

ii python-cffi 0.8.6-1 armhf Foreign Function Interface for Py

ii python-chardet 2.3.0-1 all universal character encoding dete

ii python-coloram 0.3.2-1 all Cross-platform colored terminal t

ii python-cryptog 0.6.1-1 armhf Python library exposing cryptogra

ii python-dev 2.7.9-1 armhf header files and a static library

ii python-distlib 0.1.9-1 all low-level components of python di

ii python-gdbm 2.7.8-2+b1 armhf GNU dbm database support for Pyth

ii python-html5li 0.999-3 all HTML parser/tokenizer based on th

ii python-minimal 2.7.9-1 armhf minimal subset of the Python lang

ii python-ndg-htt 0.3.2-1 all enhanced HTTPS support for httpli

ii python-openssl 0.14-1 all Python 2 wrapper around the OpenS

ii python-pip 1.5.6-5 all alternative Python package instal

ii python-pkg-res 5.5.1-1 all Package Discovery and Resource Ac

ii python-ply 3.4-5 all Lex and Yacc implementation for P

ii python-pyasn1 0.1.7-1 all ASN.1 library for Python (Python

ii python-pycpars 2.10+dfsg-3 all C parser in Python

ii python-request 2.4.3-6 all elegant and simple HTTP library f

ii python-setupto 5.5.1-1 all Python Distutils Enhancements

ii python-six 1.8.0-1 all Python 2 and 3 compatibility libr

ii python-suds 0.4.1-15 all Lightweight SOAP client for Pytho

ii python-support 1.0.15 all automated rebuilding support for

ii python-urllib3 1.9.1-3 all HTTP library with thread-safe con

ii python-wheel 0.24.0-1 all built-package format for Python

ii python2.7 2.7.9-2+deb8 armhf Interactive high-level object-ori

ii python2.7-dev 2.7.9-2+deb8 armhf Header files and a static library

ii python2.7-mini 2.7.9-2+deb8 armhf Minimal subset of the Python lang

ii rcn-ee-archive 2016.04.24~b all GnuPG archive keys of the rcn-ee

ii rdate 1:1.2-6 armhf sets the system's date from a rem

ii readline-commo 6.3-8 all GNU readline and history librarie

ii rename 0.20-3 all Perl extension for renaming multi

ii rfkill 0.5-1 armhf tool for enabling and disabling w

ii rsyslog 8.4.2-1+deb8 armhf reliable system and kernel loggin

ii sed 4.2.2-4+deb8 armhf The GNU sed stream editor

ii sensible-utils 0.0.9 all Utilities for sensible alternativ

ii sgml-base 1.26+nmu4 all SGML infrastructure and SGML cata

ii shared-mime-in 1.3-1 armhf FreeDesktop.org shared MIME datab

ii sharutils 1:4.14-2 armhf shar, unshar, uuencode, uudecode

ii shishi-common 1.0.2-5 all Platform independent files for Sh

ii startpar 0.59-3 armhf run processes in parallel and mul

ii sudo 1.8.10p3-1+d armhf Provide limited super user privil

ii systemd 230-7~bpo8+2 armhf system and service manager

ii systemd-sysv 230-7~bpo8+2 armhf system and service manager - SysV

ii sysv-rc 2.88dsf-59 all System-V-like runlevel change mec

ii sysvinit-utils 2.88dsf-59 armhf System-V-like utilities

ii tar 1.27.1-2+deb armhf GNU version of the tar archiving

ii tcpd 7.6.q-25 armhf Wietse Venema's TCP wrapper utili

ii tftp 0.17-18 armhf Trivial file transfer protocol cl

ii traceroute 1:2.0.20-2+b armhf Traces the route taken by packets

ii tzdata 2016j-0+deb8 all time zone and daylight-saving tim

ii ucf 3.0030 all Update Configuration File(s): pre

ii udev 230-7~bpo8+2 armhf /dev/ and hotplug management daem

ii unrar 1:5.2.7-0.1 armhf Unarchiver for .rar files (non-fr

ii unzip 6.0-16+deb8u armhf De-archiver for .zip files

ii usbutils 1:007-2 armhf Linux USB utilities

ii util-linux 2.25.2-6 armhf Miscellaneous system utilities

ii vlan 1.9-3.2 armhf user mode programs to enable VLAN

ii wget 1.16-1+deb8u armhf retrieves files from the web

ii wireless-regdb 2016.06.10-1 all wireless regulatory database

ii wpasupplicant 2.5~git20150 armhf client support for WPA and WPA2 (

ii xauth 1:1.0.9-1 armhf X authentication utility

ii xdg-user-dirs 0.15-2 armhf tool to manage well known user di

ii xml-core 0.13+nmu2 all XML infrastructure and XML catalo

ii xz-utils 5.1.1alpha+2 armhf XZ-format compression utilities

ii zlib1g:armhf 1:1.2.8.dfsg armhf compression library - runtime

ii zlib1g-dev:arm 1:1.2.8.dfsg armhf compression library - development

</pre>

====pip packages====

Please click on the ''Expand'' button to see the list of the installed pip packages.

root@arm:~# pip freeze

Automat==0.5.0

Jinja2==2.9.5

MarkupSafe==1.0

PyNaCl==1.0.1

PyQRCode==1.2.1

PyTrie==0.3

PyYAML==3.12

Pygments==2.2.0

Pynetinfo==0.2.3

Twisted==17.1.0

appdirs==1.4.3

argh==0.26.2

argparse==1.2.1

attrs==16.3.0

autobahn==0.17.2

bitstring==3.1.5

bluepy==1.0.5

cbor==1.0.0

cffi==1.9.1

chardet==2.3.0

click==6.7

colorama==0.3.2

constantly==15.1.0

crossbar==17.2.1

cryptography==1.7.2

enum34==1.1.6

html5lib==0.999

idna==2.5

incremental==16.10.1

ipaddress==1.0.18

lmdb==0.92

mistune==0.7.3

ndg-httpsclient==0.3.2

netaddr==0.7.19

packaging==16.8

pathtools==0.1.2

ply==3.4

psutil==5.2.0

py-ubjson==0.8.5

pyOpenSSL==16.2.0

pyasn1==0.2.3

pyasn1-modules==0.0.8

pycparser==2.17

pyparsing==2.1.10

requests==2.4.3

sdnotify==0.3.1

service-identity==16.0.0

setproctitle==1.1.10

shutilwhich==1.1.0

six==1.10.0

sortedcontainers==1.5.7

suds==0.4.1

treq==16.12.0

txaio==2.6.1

u-msgpack-python==2.3.0

urllib3==1.9.1

virtualenv==1.7.1.2

watchdog==0.8.3

wheel==0.24.0

wsgiref==0.1.2

zope.interface==4.3.3

</pre>

==Notes about physical interfaces==

In principle, the physical interfaces can be accessed the same way as described for the [[Physical_devices_mapping_(XUELK)|Yocto root file system]]. However, some of them require a different approach. For more details, please refer to the following sections.

===Ethernet===

See [[#Adding packages|this section]].

===Bluetooth and WiFi===

The root file system contains the same calibration file indicated [[XUELK-AN-001:_Using_WiFi-Bluetooth_combo_plugin_with_SBC_Lynx#Calibration|here]].

====Bluetooth====

The following script can be run to enable the Bluetooth controller:

root@arm:~# ./test/dwm_bt_init.sh

Found a Texas Instruments' chip!

Firmware file : /lib/firmware/ti-connectivity/TIInit_7.6.15.bts

Loaded BTS script version 1

texas: changing baud rate to 3000000, flow control to 1

Device setup complete

Devices:

hci0 88:33:14:5E:30:60

</pre>

Once the <code>hci</code> interface is enabled, <code>hcitool</code> or other tools can be used to access it:

root@arm:~# hcitool scan

Scanning ...

yy:yy:yy:yy:yy:yy device1

zz:zz:zz:zz:zz:zz device2

</pre>

====WiFi (client mode)====

The procedure here described can be used to connect to an Access Point, using the WPA2/PSK security protocol with network address given by the AP via DHCP. User can also follow [https://wiki.debian.org/WiFi/HowToUse#Command_Line this guide from Debian Wiki] for a generic approach.

As the WiFi driver is not statically linked to the kernel image, it is necessary to load the module first. This operation is done automatically upon boot, as the module is listed in <code>/etc/modules</code>:

root@arm:~# cat /etc/modules

# /etc/modules: kernel modules to load at boot time.

#

# This file contains the names of kernel modules that should be loaded

# at boot time, one per line. Lines beginning with "#" are ignored.

wl12xx

</pre>

In case you need to unload/load the module manually, the following commands can be used:

root@arm:~# rmmod wl12xx

root@arm:~# modprobe wl12xx

root@arm:~# [ 2751.040431] wlcore: loaded

</pre>

Once the WiFi module is loaded, it's time to configure the interface: first of all we need to fix interface renaming with the following command:

root@arm:~# ln -s /dev/null /etc/systemd/network/99-default.link

</pre>

Generate the PSK from the ESSID and the clear text passphrase using <code>wpa_passphrase</code> tool:

root@arm:~# wpa_passphrase SSID_ZyXEL_WPA2

# reading passphrase from stdin

ZyXEL-WPA2-PSK

network={

ssid="SSID_ZyXEL_WPA2"

#psk="ZyXEL-WPA2-PSK"

psk=ec41b79ebdf10022908aa10189b0341f095fd62eeb719a67c5c920e0cde28564

}

</pre>

Edit <code>/etc/network/interfaces</code> and change the <code>wlan0</code> configuration as follows, by entering the <code>ssid</code> and <code>psk</code> generated above:

auto wlan0

iface wlan0 inet dhcp

wpa-ssid SSID_ZyXEL_WPA2

wpa-psk

ec41b79ebdf10022908aa10189b0341f095fd62eeb719a67c5c920e0cde28564

</pre>

User can now restart <code>systemd</code> networking service with:

systemctl restart networking

</pre>

Now you can check the system configuration using standard tools (<code>route</code>, <code>ifconfig</code>, <code>iw</code>). E.g. to check the WiFi link status use:

root@arm:~# iw wlan0 link

Connected to fe:f0:28:cc:03:90 (on wlan0)

SSID: SSID_ZyXEL_WPA2

freq: 2437

RX: 13605 bytes (160 packets)

TX: 1226 bytes (12 packets)

signal: -22 dBm

tx bitrate: 54.0 MBit/s

bss flags: short-preamble short-slot-time

dtim period: 1

beacon int: 100

</pre>All of the above configuration are persistent at reboots and automatically started by <code>systemd</code> at boot time.

==Miscellaneous configurations==

===<code>ssh</code> server===

The configuration file <code>/etc/ssh/sshd_config</code> is set to permit <code>root</code> user to log in.

===Installing MySQL server with remote access===

This section shows how to install MySQL server and how to enable remote access for <code>root</code> user.

{{ImportantMessage|text=From a security standpoint, giving <code>root</code> user logon permission from any host may be dangerous.

}}

Firstly, install the <code>mysql-server</code> package. During the installation process, you will set the password for the <code>root</code> user:

root@arm:~# sudo apt-get update

Get:1 http://security.debian.org jessie/updates InRelease [63.1 kB]

...

Reading package lists... Done

root@arm:~# sudo apt-get install mysql-server

Reading package lists... Done

Building dependency tree

...

After this operation, 85.1 MB of additional disk space will be used.

Do you want to continue? [Y/n]

Get:1 http://security.debian.org/ jessie/updates/main mysql-common all 5.5.54-0+deb8u1 [81.2 kB]

...

Configuring mysql-server-5.5

----------------------------

While not mandatory, it is highly recommended that you set a password for the

MySQL administrative "root" user.

If this field is left blank, the password will not be changed.

New password for the MySQL "root" user:

Repeat password for the MySQL "root" user:

Selecting previously unselected package libaio1:armhf.

...

Processing triggers for systemd (230-7~bpo8+2) ...

root@arm:~#

</pre>

Verify the server is up and running:

root@arm:~# mysql -u root -p

Enter password:

Welcome to the MySQL monitor. Commands end with ; or \g.

Your MySQL connection id is 43

Server version: 5.5.54-0+deb8u1 (Debian)

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> exit

Bye

root@arm:~#

</pre>

Edit the <code>/etc/mysql/my.cnf</code> file in order to comment out the following lines:

#bind-address = 127.0.0.1

#skip-networking

</pre>

Restart the server to make the changes take effect:

root@arm:~# service mysql restart

</pre>

Access MySQL server locally and issue the commands shown below:

root@arm:~# mysql -u root -p

Enter password:

Welcome to the MySQL monitor. Commands end with ; or \g.

Your MySQL connection id is 37

Server version: 5.5.54-0+deb8u1 (Debian)

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> GRANT ALL PRIVILEGES ON *.* TO 'root'@'%' IDENTIFIED BY 'password' WITH GRANT OPTION;

Query OK, 0 rows affected (0.01 sec)

mysql> SELECT * from information_schema.user_privileges where grantee like "'root'%";

+--------------------+---------------+-------------------------+--------------+

+--------------------+---------------+-------------------------+--------------+

| 'root'@'localhost' | def | SELECT | YES |

| 'root'@'localhost' | def | INSERT | YES |

| 'root'@'localhost' | def | UPDATE | YES |

| 'root'@'localhost' | def | DELETE | YES |

| 'root'@'localhost' | def | CREATE | YES |

| 'root'@'localhost' | def | DROP | YES |

| 'root'@'localhost' | def | RELOAD | YES |

| 'root'@'localhost' | def | SHUTDOWN | YES |

| 'root'@'localhost' | def | PROCESS | YES |

| 'root'@'localhost' | def | FILE | YES |

| 'root'@'localhost' | def | REFERENCES | YES |

| 'root'@'localhost' | def | INDEX | YES |

| 'root'@'localhost' | def | ALTER | YES |

| 'root'@'localhost' | def | SHOW DATABASES | YES |

| 'root'@'localhost' | def | SUPER | YES |

| 'root'@'localhost' | def | CREATE TEMPORARY TABLES | YES |

| 'root'@'localhost' | def | LOCK TABLES | YES |

| 'root'@'localhost' | def | EXECUTE | YES |

| 'root'@'localhost' | def | REPLICATION SLAVE | YES |

| 'root'@'localhost' | def | REPLICATION CLIENT | YES |

| 'root'@'localhost' | def | CREATE VIEW | YES |

| 'root'@'localhost' | def | SHOW VIEW | YES |

| 'root'@'localhost' | def | CREATE ROUTINE | YES |

| 'root'@'localhost' | def | ALTER ROUTINE | YES |

| 'root'@'localhost' | def | CREATE USER | YES |

| 'root'@'localhost' | def | EVENT | YES |

| 'root'@'localhost' | def | TRIGGER | YES |

| 'root'@'localhost' | def | CREATE TABLESPACE | YES |

| 'root'@'arm' | def | SELECT | YES |

| 'root'@'arm' | def | INSERT | YES |

| 'root'@'arm' | def | UPDATE | YES |

| 'root'@'arm' | def | DELETE | YES |

| 'root'@'arm' | def | CREATE | YES |

| 'root'@'arm' | def | DROP | YES |

| 'root'@'arm' | def | RELOAD | YES |

| 'root'@'arm' | def | SHUTDOWN | YES |

| 'root'@'arm' | def | PROCESS | YES |

| 'root'@'arm' | def | FILE | YES |

| 'root'@'arm' | def | REFERENCES | YES |

| 'root'@'arm' | def | INDEX | YES |

| 'root'@'arm' | def | ALTER | YES |

| 'root'@'arm' | def | SHOW DATABASES | YES |

| 'root'@'arm' | def | SUPER | YES |

| 'root'@'arm' | def | CREATE TEMPORARY TABLES | YES |

| 'root'@'arm' | def | LOCK TABLES | YES |

| 'root'@'arm' | def | EXECUTE | YES |

| 'root'@'arm' | def | REPLICATION SLAVE | YES |

| 'root'@'arm' | def | REPLICATION CLIENT | YES |

| 'root'@'arm' | def | CREATE VIEW | YES |

| 'root'@'arm' | def | SHOW VIEW | YES |

| 'root'@'arm' | def | CREATE ROUTINE | YES |

| 'root'@'arm' | def | ALTER ROUTINE | YES |

| 'root'@'arm' | def | CREATE USER | YES |

| 'root'@'arm' | def | EVENT | YES |

| 'root'@'arm' | def | TRIGGER | YES |

| 'root'@'arm' | def | CREATE TABLESPACE | YES |

| 'root'@'127.0.0.1' | def | SELECT | YES |

| 'root'@'127.0.0.1' | def | INSERT | YES |

| 'root'@'127.0.0.1' | def | UPDATE | YES |

| 'root'@'127.0.0.1' | def | DELETE | YES |

| 'root'@'127.0.0.1' | def | CREATE | YES |

| 'root'@'127.0.0.1' | def | DROP | YES |

| 'root'@'127.0.0.1' | def | RELOAD | YES |

| 'root'@'127.0.0.1' | def | SHUTDOWN | YES |

| 'root'@'127.0.0.1' | def | PROCESS | YES |

| 'root'@'127.0.0.1' | def | FILE | YES |

| 'root'@'127.0.0.1' | def | REFERENCES | YES |

| 'root'@'127.0.0.1' | def | INDEX | YES |

| 'root'@'127.0.0.1' | def | ALTER | YES |

| 'root'@'127.0.0.1' | def | SHOW DATABASES | YES |

| 'root'@'127.0.0.1' | def | SUPER | YES |

| 'root'@'127.0.0.1' | def | CREATE TEMPORARY TABLES | YES |

| 'root'@'127.0.0.1' | def | LOCK TABLES | YES |

| 'root'@'127.0.0.1' | def | EXECUTE | YES |

| 'root'@'127.0.0.1' | def | REPLICATION SLAVE | YES |

| 'root'@'127.0.0.1' | def | REPLICATION CLIENT | YES |

| 'root'@'127.0.0.1' | def | CREATE VIEW | YES |

| 'root'@'127.0.0.1' | def | SHOW VIEW | YES |

| 'root'@'127.0.0.1' | def | CREATE ROUTINE | YES |

| 'root'@'127.0.0.1' | def | ALTER ROUTINE | YES |

| 'root'@'127.0.0.1' | def | CREATE USER | YES |

| 'root'@'127.0.0.1' | def | EVENT | YES |

| 'root'@'127.0.0.1' | def | TRIGGER | YES |

| 'root'@'127.0.0.1' | def | CREATE TABLESPACE | YES |

| 'root'@'::1' | def | SELECT | YES |

| 'root'@'::1' | def | INSERT | YES |

| 'root'@'::1' | def | UPDATE | YES |

| 'root'@'::1' | def | DELETE | YES |

| 'root'@'::1' | def | CREATE | YES |

| 'root'@'::1' | def | DROP | YES |

| 'root'@'::1' | def | RELOAD | YES |

| 'root'@'::1' | def | SHUTDOWN | YES |

| 'root'@'::1' | def | PROCESS | YES |

| 'root'@'::1' | def | FILE | YES |

| 'root'@'::1' | def | REFERENCES | YES |

| 'root'@'::1' | def | INDEX | YES |

| 'root'@'::1' | def | ALTER | YES |

| 'root'@'::1' | def | SHOW DATABASES | YES |

| 'root'@'::1' | def | SUPER | YES |

| 'root'@'::1' | def | CREATE TEMPORARY TABLES | YES |

| 'root'@'::1' | def | LOCK TABLES | YES |

| 'root'@'::1' | def | EXECUTE | YES |

| 'root'@'::1' | def | REPLICATION SLAVE | YES |

| 'root'@'::1' | def | REPLICATION CLIENT | YES |

| 'root'@'::1' | def | CREATE VIEW | YES |

| 'root'@'::1' | def | SHOW VIEW | YES |

| 'root'@'::1' | def | CREATE ROUTINE | YES |

| 'root'@'::1' | def | ALTER ROUTINE | YES |

| 'root'@'::1' | def | CREATE USER | YES |

| 'root'@'::1' | def | EVENT | YES |

| 'root'@'::1' | def | TRIGGER | YES |

| 'root'@'::1' | def | CREATE TABLESPACE | YES |

| 'root'@'%' | def | SELECT | YES |

| 'root'@'%' | def | INSERT | YES |

| 'root'@'%' | def | UPDATE | YES |

| 'root'@'%' | def | DELETE | YES |

| 'root'@'%' | def | CREATE | YES |

| 'root'@'%' | def | DROP | YES |

| 'root'@'%' | def | RELOAD | YES |

| 'root'@'%' | def | SHUTDOWN | YES |

| 'root'@'%' | def | PROCESS | YES |

| 'root'@'%' | def | FILE | YES |

| 'root'@'%' | def | REFERENCES | YES |

| 'root'@'%' | def | INDEX | YES |

| 'root'@'%' | def | ALTER | YES |

| 'root'@'%' | def | SHOW DATABASES | YES |

| 'root'@'%' | def | SUPER | YES |

| 'root'@'%' | def | CREATE TEMPORARY TABLES | YES |

| 'root'@'%' | def | LOCK TABLES | YES |

| 'root'@'%' | def | EXECUTE | YES |

| 'root'@'%' | def | REPLICATION SLAVE | YES |

| 'root'@'%' | def | REPLICATION CLIENT | YES |

| 'root'@'%' | def | CREATE VIEW | YES |

| 'root'@'%' | def | SHOW VIEW | YES |

| 'root'@'%' | def | CREATE ROUTINE | YES |

| 'root'@'%' | def | ALTER ROUTINE | YES |

| 'root'@'%' | def | CREATE USER | YES |

| 'root'@'%' | def | EVENT | YES |

| 'root'@'%' | def | TRIGGER | YES |

| 'root'@'%' | def | CREATE TABLESPACE | YES |

+--------------------+---------------+-------------------------+--------------+

140 rows in set (0.02 sec)

mysql> FLUSH PRIVILEGES;

Query OK, 0 rows affected (0.00 sec)

mysql>

</pre>

You should be able to access from remote host:

dvdk@osboxes:~$ mysql -u root -ppassword -h 192.168.0.81

Welcome to the MySQL monitor. Commands end with ; or \g.

Your MySQL connection id is 37

Server version: 5.5.54-0+deb8u1 (Debian)

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql>

</pre>

U0005

a000298_approval, dave_user

299

edits

Changes

XUELK-AN-002: Running Debian distribution

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Quick Links

Contact us

How to use wiki

Advanced Search

Tools