39
edits
Changes
no edit summary
!Notes
|-
|1.0.0
|1.0.0
|August 2016
|First public release
|-
|}
==Introduction==
[[:Category:SBC_Lynx|SBC Lynx]] can be populated with [[Wireless_Module_(DWM)|DWM WiFi/Bluetooth combo plugin]] to easily add wireless connectivity.
==WiFi==
Enable of interface
<pre>
root@sbc-lynx:~# ifconfig wlan0 down
wlcore: down
root@sbc-lynx:~# ifconfig wlan0 up
wlcore: firmware booted (Rev 6.3.10.0.133)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
</pre>
Scan of AP
<pre>
root@sbc-lynx:~# iw wlan0 scan
BSS ca:d7:19:92:f9:17(on wlan0)
TSF: 36464451691 usec (0d, 10:07:44)
freq: 2412
beacon interval: 100 TUs
capability: ESS Privacy ShortSlotTime (0x0411)
signal: -97.00 dBm
last seen: 2820 ms ago
Information elements from Probe Response frame:
SSID: davesrl2
Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0
DS Parameter set: channel 1
ERP: <no flags>
ERP D4.0: <no flags>
RSN: * Version: 1
* Group cipher: TKIP
* Pairwise ciphers: TKIP
* Authentication suites: PSK
* Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
Extended supported rates: 6.0 9.0 12.0 48.0
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
</pre>
==Bluetooth==
<pre>
root@sbc-lynx:~# echo 135 > /sys/class/gpio/export
root@sbc-lynx:~# echo out > /sys/class/gpio/gpio135/direction
root@sbc-lynx:~# echo 1 > /sys/class/gpio/gpio135/value
root@sbc-lynx:~# hciattach -t 60 /dev/ttymxc1 texas 115200
Found a Texas Instruments' chip!
Firmware file : /lib/firmware/ti-connectivity/TIInit_7.6.15.bts
Loaded BTS script version 1
texas: changing baud rate to 3000000, flow control to 1
Device setup complete
root@sbc-lynx:~# hciconfig hci0 up
root@sbc-lynx:~# hcitool scan
Scanning ...
00:02:72:C6:40:16 virt
</pre>
