DESK-MX-L-AN-0007: Getting Started With QT Creator

Setting up Qt Creator to build for XELK

To install Qt Creator inside your toolchain lunch a terminal emulator and run

dvdk@vagrant-ubuntu-trusty-64:~$ cd axel/
dvdk@vagrant-ubuntu-trusty-64:~/axel$ ./qt-creator-opensource.run

An installation wizard will appear

Clik Next to proced with the installation.

Select Skip.

Select Next.

Select the install directory or click Next.

Select Next.

Click Next again.

And then click install and complete the installation.

Automatic configuration

Now it is necessary to add the definition of your board before proceding developing your first application.

For adding the board definition run.

dvdk@vagrant-ubuntu-trusty-64:~$ cd axel/
dvdk@vagrant-ubuntu-trusty-64:~/axel$ ./qt-post-install.sh

If the installation process went ok you should see inside the Tools->Options menu Kits named XELK.

Select the Kits tab and make sure that your configurations mateches the one displayed.

Manual configuration

Go to Tools->Options menu Devices

Select the Devices tab and press Add

Choose the generic linux device

Insert the ip address of your device and the username and password of the root account. Make sure that the device is connected to the network and your virtual machine is configured to use a bridge connection.

If everithing went ok you should see a dialog like the next one

And finally this is how the device window should look like

Next you need to configure the cross compilation tool inside Build & Run -> Compiler.

Click Add -> GCC and add the compiler path at

/home/dvdk/axel/sdk/latest/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-gcc

And click Apply

Do the same fort the G++ cross compilation tool

/home/dvdk/axel/sdk/latest/sysroots/x86_64-pokysdk-linux/usr/bin/arm-poky-linux-gnueabi/arm-poky-linux-gnueabi-g++

Qt application example

Now that the setup is finished, you can create your first application Open a new terminal and source the enviroment variables with the command.

dvdk@vagrant-ubuntu-trusty-64:~$ ./env.sh

In the same terminal digit the following command if you diden't change the installation directory.

dvdk@vagrant-ubuntu-trusty-64:~$ ./qtcreator-4.3.0/bin/qtcreator

Close the tab and create a new project.

Select Application Qt Widgets Application and click Choose...

Now call the name Test and pres Next.

Select the XELK Kit and click Next.

Choose the class name for your application.

Click finish and conclude the setup.

Now you will add a button to your application. In order to do this, select from the Edit window and select Test->Forms->mainwindow.ui

To add a Push Button click on Push Button in the Buttons tab and drag it to the main widown view. In order to edit the text displayed by the label, dubble click it and write "Hello World!".

After that, you need to insert the following line inside the Test.pro file

target.path = /tmp/Test # path on device
INSTALLS += target

Where /temp/Test is the path in which your application will be dowloaded inside the device.

The last step before running the application inside the device is to select the Project window select the Run configuration and as Arguments.

-platform eglfs

After these changes you are ready to debug your application directly inside your board with the Run/Debug command.