XELK-AN-003: Package Management with Yocto

Info Box Applies to Axel Ultra Applies to AXEL ESATTA Applies to Axel Lite

History

Version	Date	XELK version	Notes
1.0.0	October 2016	2.2.0	First release

Introduction

This application note details:

• how to build packages and packages feeds with Yocto
• how to deploy your own package manager server
• how to use a package manager with a Yocto based root file system

Yocto Package Manager

The default XELK packaging system is RPM , which can be uses with SMART to install a package, with all its dependencies, from a remote repository.

To use smart, you need to be sure that the image is build with runtime package management support:

IMAGE_FEATURES += "package-management"

This is already enabled in default XELK images.

Building packages and feeds

After bootstrapping the XELK Yocto environment and build the packages you want to publish, you can create the package feeds with:

bitbake package-index

The files to deploy on server are inside $BUILD_DIR/tmp/deploy/rpm

User can also build all the recipe inside the configured layer with:

bitbake -k world

Please note that, due the fact that some packages may fail to build, the -k switch is needed to tell bitbake continue even in case of failure.

Configuring the webserver

Here we give an example in how to configure the Apache webserver on a Ubuntu 14.04 LTS distribution to serve Yocto packages. We assume that you already configure the Ubuntu networking properly and that you already install Apache with its dependencies

• Create a new virtualhost by entering the following text inside, for example, /etc/apache2/sites-available/myyocto

<VirtualHost *:80>
	ServerName myyocto.example.com
	ServerAdmin admin@example.com

	DocumentRoot /var/www/yocto
	<Directory /var/www/yocto>
		Options FollowSymLinks MultiViews
		AllowOverride None
		Order allow,deny
		allow from all
		Options +Indexes
	</Directory>

	ErrorLog ${APACHE_LOG_DIR}/yocto-error.log

	# Possible values include: debug, info, notice, warn, error, crit,
	# alert, emerg.
	LogLevel warn

	CustomLog ${APACHE_LOG_DIR}/yocto-access.log combined
</VirtualHost>

• enable the virtualhost

sudo a2ensite yocto

• apply the changes to Apache

sudo service apache2 restart

• copy the feeds and packages into the webserver directory, e.g. via ftp or scp

scp -r $BUILD_DIR/tmp/deploy/rpm user@myyocto.example.com:/var/www/yocto

Installing packages on target

To use smart at runtime first of all you need to enable a channel, which commonly is a remote webserver that provide packages feed and the binary packages itself, like the one we configured in the previous section.

On the target just run the following command:

smart channel --add xelk-2.2.0-cortexa9hf type=rpm-md baseurl=http://myyocto.example.com/xelk-2.2.0/cortexa9hf_vfp_neon

Where:

• xelk-2.2.0-cortexa9hf is the name of the channel
• http://myyocto.example.com/xelk-2.2.0/cortexa9hf_vfp_neon is the URL of the webserver

You can also add a local directory, for example mounted via NFS directly on target, with the following command:

smart channel --add local type=rpm-dir name=localrpms manual=true priority=1 path=/opt/rpms -y

After you configure the channel and/or update packages feed on server, you need to update smart database:

smart update

Finally you can install the packages (and all its dependencies) on the target with the following command:

smart install PACKAGE_NAME

E.g.

smart install emacs