{{InfoBoxTop}}{{AppliesToNaon}}{{AppliesToDido}}{{Applies To NaonEVB-Mid}}{{InfoBoxBottom}}===Introduction===[[:Category:Naon (SOM)|NaonNAON]] provides many different video input/ouput interfaces. (see also [[NaonEVB-MidVideo input ports (Naon)]] and [[Video output ports (Naon)]] carrier board integrates several connectors that allow to exercise these interfaces. Following sections details each of them).

[[NaonEVB-Mid]] carrier board integrates several connectors that allow to exercise these interfaces. Following sections details each of them. Please note that different video ports may have pins in common. Therefore '''different video ports may not work at the same time'''. ===J19/J24(VIN0)===These 2.54mm-pitch connectors route parallel 24-bit VIN0 port. It is avaible available a [[ADD-ON_DVI-RX|hardware plugin add-on]] implementing a DVI receiver that matches these connectors. ===J25/J26(VIN1A/VOUT1)===

===J27(ISS camera sensor interface)===This connector routes ISS camera sensor interface (16-bit). It is compatible with [[http://www.ti.com/devnet/docs/catalog/thirdpartydevtoolfolder.tsp?actionPerformed=productFolder&productId=5018|LI-MOD01 - Camera Module Adapter Board for DM355/DM365].===J28 (ISS camera sensor interface)===This connector routes ISS camera sensor interface (16-bit). It is compatible with [https://www.leopardimaging.com/LI-CAM_Camera_Boards.html LI-CAM-AR0331 camera board].===J6 (HDMI VOUT1)===This connector implements HDMI port associated to VOUT1.