</pre>
=== Dual MAC EMAC mode (NaonEVB-Lite)===
Added DUAL MAC supportThe two Ethernet interfaces on [[Category: Phy 100Mbit is eth0 NaonEVB-Lite|NaonEVB-Lite]] can be used as:* Ethernet switch: Linux sees only one Ethernet interface and packets are routed between the two ports like a standard Ethernet switch does.* Dual EMAC Mode: Linux sees two independent Ethernet interfaces and Phy 1Gbit is eth1packet are routed between the two like a Ethernet router does.
Documentation The default configuration provided with [http[Naon Embedded Linux Kit (NELK)]] is ''Dual EMAC Mode'', where ''eth0'' is the [[Category:Naon|Naon]] on-board 10//processors100Mbit Ethernet interface, while eth1 is the [[Category:NaonEVB-Lite|NaonEVB-Lite]] Gigabit interface.wiki.ti.com/index.php/DM814x_AM387x_Ethernet_Switch_User_Guide#Dual_Standalone_EMAC_mode here]
Added VLAN tagging support only on eth1 (gigabit), VLAN ID 2 The official TI documentation to enable and 3 use Dual EMAC is reserved for DualMAC mode[http://processors.wiki.ti.com/index.php/DM814x_AM387x_Ethernet_Switch_User_Guide#Dual_Standalone_EMAC_mode here]
'''NFSroot Please note that no routing is possible only on eth0 (100Mbit)'''enabled between the two interface is Dual EMAC mode by default. Linux userspace tool should be used to configure VLAN tagging and packet routing rules.
