Touchscreen Calibration (DIVELK)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
History[edit | edit source]
| Version | Date | DIVELK version | Notes |
|---|---|---|---|
| 1.0.0 | April 2018 | DIVELK 4.0.0 |
Calibration[edit | edit source]
To calibrate the touchscreen, please do the following:
rm /etc/udev/rules.d/ws-calibrate.rules reboot
At the next restart the weston-calibrator tool should automatically show up. Tap on the red cross appearing on the screen to calibrate the touch panel.
Note: In the case of root filesystem over NFS and SD card plugged in, make sure delete also the calibration rules stored in the SD card partition before rebooting:
rm /etc/udev/rules.d/ws-calibrate.rules rm /run/media/mmcblk0p1/ws-calibrate.rules reboot
Additional information can be found int the following page in TI wiki
