Template:Release Notes
History | |||
---|---|---|---|
Version | Issue Date | Notes | |
X.Y.Z | Month Year | TBD | |
[TBD_link X.Y.Z] | Month Year | TBD |
Release Notes[edit source]
DAVE Embedded Systems adds to the latest Linux BSP from TBD (e.g. NXP) the customization required to support the SOC platform. For this reason most of the documentation provided by TBD (e.g. NXP) remains valid for the DESK development kit.
However, some customization is required, in particular at bootloader and linux kernel levels.
The following table reports the DESK releases information.
DESK version | |
---|---|
Release number | 1.x.x |
Release type | TBD (e.g. Major or Minor) |
Status | TBD (e.g. In progress or Released) |
Release date | Qx 20xx |
Release notes | TBD (link to the Release page Ver 1.0.0) |
Product support | {{{nome-som}}} |
MVM (distro version) | Ubuntu TBD |
U-Boot version | TBD |
Linux version | TBD |
Drivers |
SPI NOR Flash (boot) LVDS0 |
Manufacturer BSP version | TBD (e.g. imx_4.14.98_2.0.0_ga) |
Graphic libraries | Qt TBD (e.g. 5.9.6) |
Build System | Yocto TBD (e.g. sumo) |
Android |
DESK 1.0.0[edit source]
New MVM must be installed for using DESK-1.0.0. The VM is available for download on DAVE's XELK Reserved Area for registered users. |
Release notes:
- Major change to NXP BSP 4.14.98
- Updated u-boot and kernel versions
- Updated Yocto version
- Updated Qt version
Known Limitations[edit source]
The following table reports the known limitations of this XELK release:
Issue | Description |
---|---|
NAND Samsung | NAND Model K9F4G08U0D not detected in u-boot |
Linux kernel xconfig
|
make xconfig does not work
|
Wayland not supported | Yocto QT5 images with Wayland backend is not yet supported |
Downloadable binary images[edit source]
TBD: mettere l'indirizzo giusto della directory in mirror
All binary images for [[DESK-{{{kit-code}}}-L]] are hosted on DAVE Embedded System mirror server. There you can find a sub directory for each version of this development kit.
U-boot performs 2-stage bootloader providing two files: SPL
and u-boot.img
. Both two files must be stored into SD card using dd
command.
TBD: editare la tabella con i corretti piattaforme, dtb e link ai binari
A summary of images with a brief description can be found into the table below:
Image | DESK version x.y.z | |||
---|---|---|---|---|
Platform | SBCX rev.B | SBCX rev.B | ||
Carrier Board ConfigID | 0012 | 0013 | ||
LCD panel | Ampire 800 x 480 7" LVDS 262K colors (RGB666) (AM-800480STMQW-TA1 or AM-800480SETMQW-TA1H) | |||
Touchscreen | resistive | capacitive | ||
bootscript | boot.scr | |||
SPL | SPL (Quad / NOR) SPL (DualLite / NAND) | |||
u-boot.img | (Quad / NOR) (DualLite / NAND) | |||
Linux kernel | uImage | |||
Device tree (Quad) | imx6q-sbcx-cb0012.dtb | imx6q-sbcx-cb0013.dtb | ||
Device tree (DualLite) | imx6dl-sbcx-cb0012.dtb | imx6dl-sbcx-cb0013.dtb |
[[Category:{{{nome-som}}}]]