Template:EVB Interfaces and Connectors
Revision as of 15:48, 27 August 2020 by Template>U0007 (Created page with "<section begin=History/> {| style="border-collapse:collapse; " !colspan="4" style="width:100%; text-align:left"; border-bottom:solid 2px #ededed"|History |- !style="border-le...")
| History | |||
|---|---|---|---|
| Version | Issue Date | Notes | |
| X.Y.Z | Month Year | TBD | |
| [TBD_link X.Y.Z] | Month Year | TBD | |
| ... | ... | ... | |
{{{nome-peripheral}}} interfaceEdit
TBD: sostituire le sezioni con le informazioni sull'uso della periferica e del suo connettore Nell'esempio di seguito c'è la descrizione dell'interfaccia UART/console
DescriptionEdit
The {{{nome-peripheral}}} interface available on the Evaluation Kit at the connector TBD:Jxxx.
Jxx is a TBD:connector-type header connector for the RS232 two-wires UART3 port, used for debug purposes (bootloader and operating system serial console).
SignalsEdit
The following table describes the interface signals:
| Pin# | SOM Pin# | Pin name | Pin function | Pin Notes |
|---|---|---|---|---|
| 1,2,4,6,,7,8,10 | - | N.A. | N.C. | Not connected |
| 3 | J1.189 | RS232_RX | Receive line | |
| 3 | J1.187 | RS232_TX | Transmit line | |
| 9 | - | DGND | Ground |
Device mappingEdit
UART3 is mapped to /dev/ttymxc2 device in Linux. The peripheral is used as the default serial console, both for the bootloader and the kernel.
Device usageEdit
To connect to the debug serial port:
- connect the DB9 adapter bracket to the J22 connector on the SBCX board
- connect a serial cable between DB9 connector and PC COM port through a NULL-modem cable (not provided)
- start your favorite terminal emulator software on PC (eg: PuTTY); communication parameters are: 115200,N,8,1
[[Category:{{{nome-som}}}]]