Bureaucrats, dave_user, Administrators
8,226
edits
Changes
no edit summary
|}
<section end=History/>
__FORCETOC__
<section begin=Body/>
The test bed used in this example consists of an i.MX6 DualLite board equipped with a 512MB 8-bit asynchronous 1-bit ECC SLC NAND memory which is connected to the EIM bus of the SoC. The boot firmware image is the U-Boot binary files (<code>mx6qdlaxel_SPL</code> and <code>mx6qdlaxel_u-boot.img</code>). Its size is about 550 kB. From the point of view of MTD partitions, the boot partition for SPL is <code>mtd0</code> is 2MB while the second stage partition <code>mtd1</code> is 6MB.
===Boot partition organization===
The following image shows the organization of the boot partition.
The following section will describe how to burn the boot partition in practice.
===How to burn the boot partition===
The burning of the boot partition is performed by the [https://github.com/NXPmicro/imx-kobs <code>kobs-ng</code> tool] and the standard [http://git.infradead.org/mtd-utils.git <code>flash_erase</code> and <code>nandwrite</code>] flash utilities.