Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→How to create a bootable MicroSD card
*from the Xilinx Tools menu, select ''Create Zynq Boot Image''
*select Create New BIF file and insert path and name of the .bif file
*in the ''Boot image partitions '' section, click on ''Add '' to browse and add the following files:**FSBL in .elf format, with ''bootloader'' as partition type “bootloader”**(optional) FPGA bitstream in .bit format, with partition type “datafile”''datafile''**U-boot binary with .elf extension, with partition type “datafile”''datafile''*in the ''Output path '' section, browse and select the path where saving the <code>boot.bin </code> file*on a PC, format the microSD card creating a FAT32 partition*copy the <code>boot.bin </code> file to the microSD card FAT32 partition.
==How to configure the system for microSD boot==
The S5 dip-switch on the BORAEVB carrier board is used for configuring the boot mode. Please refer to the following table to select the MicroSD mode (highlighted in green):
