Supported power mode transitions (SBC Lynx)

Info Box Applies to AXEL ULite Applies to SBC Lynx

Introduction

SBC Lynx allows to implement different schemes to manage power mode transitions. The following sections describe the most common modes. If you need to implement a mode that is not listed here, please get in touch with Sales department.

On/off mode

This is the default supported mode. This mode fits the majority of industrial application where device is powered on by the application of supply voltage and it is powered off by the removal of it. A simplified state diagram of power states is depicted in the following image.

State diagram of on/off power mode.

It is worth remembering that, in case the systems transitions to the shutdown state [1], it requires a power off/on cycle or a full hardware reset to start again.

[1] In case Linux operating system is used, transition to shutdown state can be triggered by issuing the following command: shutdown -h now.

Tablet mode

This mode resembles the use of a tablet, in the sense that it is conceived to work in combination with a physical button that can be pressed by the human operator.

The resulting simplified state diagram is depicted in the following picture.

State diagram of on/off power mode.

The implementation of tablet mode can be done by exploiting the signals available on connector J50.