3,260
edits
Changes
m
→Deploy the application on the target
Let's assume the system is configured to boot loading the kernel and root file system from the internal flash.
Start the system as described in the [[DacuIndustrial_Tablet#.22Normal.22_mode | Running Android in "normal mode"]] section.
{{ImportantMessage|text='''The default IP address is 192.168.0.122'''}}
[[File:Dacu-serial-console-cable.jpg|thumb|none|border|350px|Dacu serial cable]]
and start your preferred terminal emulator, as described in the [[DacuIndustrial_Tablet#.22Full_control.22_mode | Running Android in "full control mode"]] section.
On the u-boot console, please enter the following command to check the default ip address:
==== Check the Android Debug Bridge (ADB) and connect to the target ====
Start a connection through the Android Debug Bridge as described in the [[DacuIndustrial_Tablet#Running_the_Android_Debug_Bridge_.28ADB.29 Running_the_Android_Debug_Bridge | Running ADB]] section. Please note that setting the correct IP address on the target and is mandatory to make ADB work.
=== Develop your first application with Eclipse ===
# close the running emulator
# check that [[DacuIndustrial_Tablet#Running_the_Android_Debug_Bridge_.28ADB.29 Running_the_Android_Debug_Bridge | ADB is running]]
# open a shell and move to the workspace directory containing the project files (example: /home/user/workspace/MyFirstApp)
# enter the bin sub-directory. If you list the content of this directory, you should see the application .apk file