Bureaucrats, dave_user, Administrators
8,186
edits
Changes
→u-Boot
mmc_update=mmc dev; setexpr blocks ${filesize} / 0x200; setexpr blocks ${blocks} + 1; mmc write ${loadaddr} 2 ${blocks}
</pre>
Load u-boot binary form a <code>tftp</code> server:
<pre class="board-terminal">
done
Bytes transferred = 671788 (a402c hex)
=> run mmc_update
switch to partitions #0, OK
mmc2(part 0) is current device (eMMC)
MMC write: dev # 2, block # 2, count 1313 ... 1313 blocks written: OK
=>
</pre>
Load u-boot binary form an <code>SD</code> card:
<pre class="board-terminal">
Hit ENTER within 1 seconds to stop autoboot
=> fatload mmc 0:1 ${loadaddr} sdvx-1.0.1_mx6dlaxel_u-boot.imx
reading sdvx-1.0.1_mx6dlaxel_u-boot.imx
671788 bytes read in 50 ms (12.8 MiB/s)
=> mmc dev 2
switch to partitions #0, OK
mmc2(part 0) is current device (eMMC)
=> run mmc_update
switch to partitions #0, OK