View source for Standalone boot (DIVELK)

== Update u-boot NAND ==
<pre>
tftp ${loadaddr} diva/divelk-4.0.0_diva_nandboot_MLO
nand erase.part nand-spl; nand write ${loadaddr} nand-spl ${filesize}
tftp ${loadaddr} diva/divelk-4.0.0_diva_nandboot_u-boot.img
nand erase.part nand-uboot; nand write ${loadaddr} nand-uboot ${filesize}
</pre>

<pre class="board-terminal">
=> tftp ${loadaddr} diva/divelk-4.0.0_diva_nandboot_MLO
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.0.82; our IP address is 192.168.0.83
Filename 'diva/divelk-4.0.0_diva_nandboot_MLO'.
Load address: 0x82000000
Loading: #############
         825.2 KiB/s
done
Bytes transferred = 61716 (f114 hex)
=> nand erase.part nand-spl; nand write ${loadaddr} nand-spl ${filesize}

NAND erase.part: device 0 offset 0x0, size 0x20000
Erasing at 0x0 -- 100% complete.
OK

NAND write: device 0 offset 0x0, size 0xf114
 61716 bytes written: OK

=> tftp ${loadaddr} diva/divelk-4.0.0_diva_nandboot_u-boot.img
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 192.168.0.82; our IP address is 192.168.0.83
Filename 'diva/divelk-4.0.0_diva_nandboot_u-boot.img'.
Load address: 0x82000000
Loading: #################################################################
         #########################################
         1 MiB/s
done
Bytes transferred = 539856 (83cd0 hex)

=> nand erase.part nand-uboot; nand write ${loadaddr} nand-uboot ${filesize}

NAND erase.part: device 0 offset 0x80000, size 0x1e0000
Erasing at 0x240000 -- 100% complete.
OK

NAND write: device 0 offset 0x80000, size 0x83cd0
 539856 bytes written: OK
</pre>
'''Note:''' Adjust the SYSBOOT pins to enable boot from nand.