This chapter contains the pinout description of the Bora module, grouped in six tables (two – odd and even pins – for each connector) that report the pin mapping of the three 140-pin Bora connectors.
Each row in the pinout tables contains the following information:
|J1.119||SPI0_DQ3/MODE0/NAND_IO0||CPU.PS_MIO5_500||A6|||||||| This signal is internally pulled up or down by 20kOhm resistor to select proper depending on order code (selecting then the bootstrap configuration.)
|-
|J1.121||SPI0_DQ2/MODE2/NAND_IO2||CPU.PS_MIO4_500||B7|||||||| This signal is internally pulled up or down by 20kOhm resistor to select proper depending on order code (selecting then the bootstrap configuration.)
|-
|J1.123||SPI0_DQ1/MODE1/NAND_WE||CPU.PS_MIO3_500||D6|||||||| This signal is internally pulled up or down by 20kOhm resistor to select proper depending on order code (selecting then the bootstrap configuration.)
|-
|J1.125||SPI0_DQ0/MODE3/NAND_ALE||CPU.PS_MIO2_500||B8|||||||| This signal is internally pulled up or down by 20kOhm resistor to select proper depending on order code (selecting then the bootstrap configuration.)
|-
|J1.127||DGND||DGND||n.a.||||||||
|-
|J1.129||SPI0_SCLK/MODE4/NAND_IO1||CPU.PS_MIO6_500||A5|||||||| This signal is internally pulled up or down by 20kOhm resistor to select proper depending on order code (selecting then the bootstrap configuration.)
|J1.136||NAND_RD_B/VCFG1||CPU.PS_MIO8_500<br>NAND.~RE||D5<br>8|||||||| This signal is internally pulled up or down by 20kOhm resistor to select proper depending on order code (selecting then the bootstrap configuration.)
|-
|J1.138||NAND_CLE/VCFG0||CPU.PS_MIO7_500<br>NAND.CLE||D8<br>16|||||||| This signal is internally pulled up or down by 20kOhm resistor to select proper depending on order code (selecting then the bootstrap configuration.)
|J2.90||FPGA_INIT_B||FPGA.INIT_B_0||R10||||||||For further details, please refer to [[PL_initialization_signals_(Bora/BoraX/BoraLite) | PL initialization signals]]
|-
|J2.92||FPGA_PROGRAM_B||FPGA.PROGRAM_B_0||L6||||||||For further details, please refer to [[PL_initialization_signals_(Bora/BoraX/BoraLite) | PL initialization signals]] (10 kΩ pull-up resistor is already mounted on BORA module)
|-
|J2.94||FPGA_DONE||FPGA.DONE_0||R11||||||||For further details, please refer to [[PL_initialization_signals_(Bora/BoraX/BoraLite) | PL initialization signals]]
|-
|J2.96||WD_SET2||WDT.SET2||6||||||||
|J2.104||PS_MIO50_501||CPU.PS_MIO50_501<br>USBOTG.RESETB||B13<br>22|||||||| For further details, please refer to [[Reset_scheme_(Bora)#PS_MIO50_501_.28J2.104.29 | Reset_scheme_(Bora)#PS_MIO50_501]]
|-
|J2.106||PS_MIO51_501||CPU.PS_MIO51_501<br>ETHPHY1GB.RESET_N||B9<br>42|||||||| For further details, please refer to [[Reset_scheme_(Bora)#PS_MIO51_501_.28J2.106.29 | Reset_scheme_(Bora)#PS_MIO51_501 ]]