Please note that this process '''implicitly updates git source code repositories of U-Boot and/or Linux kernel'''. Thus '''it is strongly recommended to create new local branches if you need to modify source code'''.
=== Release notes ===
==== SDVX 1.0.5 ====
* Add support for SDV05
* Add CDC/ACM driver
==== SDVX 1.0.4 ====
* Release date: February, 22th 2019* Status: released* Freescale Linux BSP: L4.1.15-2.0.0* Supported carrier boards: SDV03,SDV04==== Notes ====Add support for RTL8188CUS and RTL8188EUS wifi USB key (client and AP mode)
* Add support for RTL8188CUS ===== Known issues and RTL8188EUS wifi USB key (client and AP mode)limitations =====
==== SDVX 1.0.1 ====
* Release date: October, 03th 2018
* Status: released
* Freescale Linux BSP: L4.1.15-2.0.0
* Supported carrier boards: SDV03,SDV04
==== Notes ====
* Add support for SDV03
==== SDVX 1.0.0 ====
* Release date: September, 18th 2018
* Status: released
* Freescale Linux BSP: L4.1.15-2.0.0
* Supported carrier boards: SDV04
==== Notes ====
* First official release
Once power is applied to the target, the U-Boot bootloader will be fetched from the flash internal storage (NOR/NAND/eMMC depending on order code) and executed. Boot messages will be printed out to the serial console. Redundant U-Boot environment is stored in the flash as well, as depicted in the following image.