Bureaucrats, dave_user, Administrators
743
edits
Changes
remove duplicated data in release notes
==Introduction==
[[File:SDVXSDV04-C1R.pngjpg|thumb|center|600px|SDV04 with AxelLite SOM]][[File:SDV04-UL-C1R.pngjpg|thumb|center|600px|SDV04 with AxelULite SOM]]
SDVX Embedded Linux Kit provides all the necessary components required to set up the developing environment to:
==Additional documentation==
SDVX documentation is provided on [[:Category:SDVX|Wiki]] product pages. The most important documents are listed below:
* [[Hardware_Manual_(SDV04)|Hardware Manual]]
* [[Mechanicals_(SDV04)|Mechanicals]]
== SDVX software components ==
'''DAVE Embedded Systems''' adds to the latest Linux BSP from NXP/Freescale the customization required to support the Axel platform. For this reason most of the documentation provided by NXP/Freescale remains valid for the SDVX development kit. However, some customization is required, in particular at bootloader and linux kernel levels.
|[[#SDVX 1.0.1 | Ver 1.0.1]]
|[[#SDVX 1.0.4 | Ver 1.0.4]]
|-
|PCB version
|SDV04 CS073817<br>SDV03 CS041718
|SDV04 CS073817<br>SDV03 CS041718
|SDV04 CS073817<br>SDV04 CS073817A<br>SDV03 CS041718<br>SDV03 CS041718A
|-
|SOM PCB version
|-
|NXP/Freescale BSP version
|L4.1.15-1.2.0.0-GA|L4.1.15-1.2.0.0-GA|L4.1.15-1.2.0.0-GA
|-
|Graphic libraries
| Device tree (UL processor) || [[mirror:sdvx/sdvx-1.0.4/sdvx-1.0.4_ul_imx6ul-axelulite-cb0042.dtb|imx6ul-axelulite-cb0042.dtb]] || [[mirror:sdvx/sdvx-1.0.4/sdvx-1.0.4_ul_imx6ul-axelulite-cb0044.dtb|imx6ul-axelulite-cb0044.dtb]] || || ||
|-
| Device tree (DualLite processor) || || || [[mirror:sdvx/sdvx-1.0.4/sdvx-1.0.4_lite_imx6dl-sfczg-cb0043.dtb|imx6dl-sfczg-cb0043.dtb]] || [[mirror:sdvx/sdvx-1.0.4/sdvx-1.0.4_lite_imx6dl-sfczg-cb0045.dtb|imx6dl-sfczg-cb0045.dtb]] ||style="text-align: center" | [[mirror:sdvx/sdvx-1.0.4/sdvx-1.0.4_lite_imx6dl-sdv03-cb004a.dtb|imx6dl-sdv03-cb004a.dtb]]
|}
=== SDVX microSD Layout ===
==== SDVX 1.0.4 ====
* Release date: February, 22th 2019* Status: released* Freescale Linux BSP: L4.1.15-2.0.0* Supported carrier boards: SDV03,SDV04==== Notes ====Add support for RTL8188CUS and RTL8188EUS wifi USB key (client and AP mode)
==== SDVX 1.0.1 ====
* Add support for SDV03
==== SDVX 1.0.0 ====
* First official release
Once power is applied to the target, the U-Boot bootloader will be fetched from the flash internal storage (NOR/NAND/eMMC depending on order code) and executed. Boot messages will be printed out to the serial console. Redundant U-Boot environment is stored in the flash as well, as depicted in the following image.
<gallery mode="packed " heights="500px">
File:Xub-nor.png|center|thumb|500px|NOR partition table
File:Nand SDVx.png|center|thumb|500px|NAND partition table
