SDV04

From DAVE Developer's Wiki
Jump to: navigation, search
Info Box
SDVX.png Applies to SDVX

Introduction[edit | edit source]

SDV04-Carrier-C1R.jpg

SDV04 is a carrier board designed to host directly AXEL ULITE and AXEL LITE SoMs. It exports major specific peripherals connectors for each SoMs.

Block Diagram[edit | edit source]

The following picture shows SDV04's block diagram:

SDV04 BD.png

Connection layout[edit | edit source]

The following picture shows SDV04's connection layout:

SFCZG-connectors-C1R.png

Features[edit | edit source]

  • 10/100 Ethernet
  • 1x USB HOST, 1x USB OTG
  • Serial port (RS232)
  • Single/Dual channel LVDS connector - for AxelLite SOM
  • Single channel LVDS connector - for AxelUlite SOM
  • Backlight (5V, 12V or current driving)
  • I2C touch connector
  • Audio connector with internal power amplifier
  • Pin strip expansion connectors for GPIOs
  • Battery connector (for internal iMX6 RTC)

Connectors pinout[edit | edit source]

J16 - PSU[edit | edit source]

J16 is a Wurth 691321100002 2x1-pin 0.138" (3.50mm) pitch connector. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 DGND Ground -
2 EXT_12V 12V Power Supply -

J1 - SODIMM connector[edit | edit source]

J1 is a TE Connectivity 204-pin SODIMM socket. The pinout matches the Axel Lite pinout and the Axel ULite pinout.

J6 - JTAG[edit | edit source]

J6 is a SAMTEC FSI-110-03-G-S connector. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 DGND - -
2 JTAG_TCK - -
3 JTAG_TMS - -
4 JTAG_TDO - -
5 JTAG_TDI - -
6 JTAG_nTRST - -
7 CPU_PORn - -
8 N.C. - -
9 N.C. - -
10 JTAG_VREF - -

J18 - boot mode[edit | edit source]

J18 is a 6x1-pin, 2.54mm pitch header, pinstrip connector. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1-2 Boot Boot from internal storage or microSD Select storage device
3-4 Reserved - Do Not Shortcircuit
5-6 Reserved - Do Not Shortcircuit

MicroSD - J13[edit | edit source]

J13 is a microSD memory card connector. It can be used as a boot device properly configuring the J18 pin header connector.

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 SD1_DAT2 DATA[2] -
2 SD1_DAT3 Card Detect/DATA[3] -
3 SD1_CMD CMD line -
4 VDD 3.3V Power Supply -
5 SD1_CLK Clock -
6, 9, 10, 11, 12 DGND - -
7 SD1_DAT0 DATA[0] -
8 SD1_DAT1 DATA[1] -
13 SD1_CD Card detect -

Ethernet - J10[edit | edit source]

Standard RJ-45 connector for 10/100Mbit/s

USB HOST - J11[edit | edit source]

J11 is a standard USB Type A Vertical Female host connector.

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 5V VDD -
2 USB_DN USB Data- -
3 USB_DP USB Data+ -
4 DGND Ground -

USB OTG - J12 (only on AxelLite model)[edit | edit source]

J12 is a Molex 53398-0471 4 pin connector. It can be used both as Host or OTG connector depending on internal USB_OTG_ID signal connection

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 5V VDD -
2 USB_OTG_DN USB OTG Data- -
3 USB_OTG_DP USB OTG Data+ -
4 DGND Ground -

RS232 - J7[edit | edit source]

J7 is a Molex 85513-5013 8 pin connector.

The following table reports the connector's pinout:

Pin# Pin name Function Notes
2 RS232 RX Receive data -
3 RS232 TX Transmit Data -
5 DGND Ground -

TOUCH - J5[edit | edit source]

J5 is Molex 53398-0671 6 pin connector. It can be used to interface a CPT Capacitive touchscreen device integrated into a standard LCD panel.

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 VDD 5V or 3V3 depending on internal connection -
2 SDA I2C SDA -
3 SCL I2C SCL -
4 INT Interrupt -
5 RES Reset -
6 DGND Ground -

LVDS - J20 - (for Axel ULite SOM)[edit | edit source]

J20 is a 10x2 DF13A-20DP header. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1, 2 3.3V_LCD0 +3.3V -
4, 7, 10,
13, 16
DGND Ground -
3 GPIO VDD or GND (internal mount) Connected to 3V3_LCD
5 LVDS_TX0_N TX0- -
6 LVDS_TX0_P TX0+ -
9 LVDS_TX1_P TX1+ -
8 LVDS_TX1_N TX1- -
11 LVDS_TX2_N TX2- -
12 LVDS_TX2_P TX2+ -
14 LVDS_CLK_N Clock- -
15 LVDS_CLK_P Clock+ -
17 BL PWM Backlight PWM control -
18 5V LCD Backlight 5V power supply - -
19 GPIO VDD or GND (internal mount) -
20 BL EN Backligth Enable Connected to 3V3_LCD

LVDS0/LVDS1 - J21 - (for AxelLite SOM)[edit | edit source]

J21 is a 20x2 DF13E-40DP header. The following table reports the connector's pinout:

Pin# Pin name Function Notes
1, 3 3.3V_LCD +3.3V -
5, 6, 11, 12, 17
23, 26, 29, 32, 35
DGND Ground -
14, 16, 18 5V_LCD +5V LCD Backlight -
20, 22, 24 12V_LCD +12V LCD Backlight -
2 LVDS0_TX1_N TX1- (Odd) -
4 LVDS0_TX1_P TX1+ (Odd) -
7 LVDS0_TX0_N TX0- (Odd) -
8 LVDS0_TX3_N TX3- (Odd) -
9 LVDS0_TX0_P TX0+ (Odd) -
10 LVDS0_TX3_P TX3+ (Odd) -
13 LVDS0_TX2_N TX2- (Odd) -
15 LVDS0_TX2_P TX2+ (Odd) -
19 LVDS0_CLK_N CLK- (Odd) -
21 LVDS0_CLK_P CLK+ (Odd) -
25 LVDS1_TX0_N TX0- (Even) -
27 LVDS1_TX0_P TX0+ (Even) -
28 LVDS1_TX1_N TX1- (Even) -
30 LVDS1_TX1_P TX1+ (even) -
31 LVDS1_TX2_N TX2- (Even) -
33 LVDS1_TX2_P TX2+ (even) -
34 LVDS1_CLK_N CLK- (Even) -
36 LVDS1_CLK_P CLK+ (Even) -
37 LVDS1_TX3_N TX3- (Even) -
38 BL PWM Backlight PWM control -
39 LVDS1_TX3_P TX3+ (even) -
40 BL EN Backligth Enable -

Audio - J14 (only on AxelLite model)[edit | edit source]

J14 is a 53375-0610 Molex 6x2.5mm pin connector.

The following table reports the connector's pinout:

Pin# Pin name Function Notes
1 HSOL Left channel Headphone/line output -
2 HSOR Right channel Headphone/line output -
3 SPKP Speaker + output -
4 SPKM Speaker - output -
5 MIC IN Microphone input -
6 MIC BIAS Microphone bias -

GPIO expander - JP1 - (for Axel ULite SOM)[edit | edit source]

JP1 is a 2x6-pin, 2.54mm pitch header, pinstrip connector. The following table reports the connector's pinout:

Pin# Pin name Function GPIO Alternate function
1 3.3V - -
2 DGND Ground -
3 GPIO_IN_0 GPIO2_IO09 I2C3_SDA, UART6_RX
4 GPIO_OUT_0 GPIO2_IO12 ECSPI4_SCLK, UART8_TX
5 GPIO_IN_1 GPIO2_IO08 I2C3_SCL, UART6_TX
6 GPIO_OUT_1 GPIO1_IO00 I2C2_SCL
7 GPIO_IN_2 GPIO2_IO11 I2C4_SDA, UART7_RX
8 GPIO_OUT_2 GPIO4_IO24 ECSPI2_MISO
9 GPIO_IN_3 GPIO2_IO10 I2C4_SCL, UART7_TX
10 GPIO_OUT_3 GPIO4_IO22 ECSPI2_SS0
11 GPIO_IN_4 GPIO2_IO13 ECSPI4_MOSI, UART8_RX
12 GPIO_OUT_4 GPIO1_IO23 ECSPI3_MISO

GPIO expander - JP1 - (for Axel Lite SOM)[edit | edit source]

JP1 is a 2x6-pin, 2.54mm pitch header, pinstrip connector. The following table reports the connector's pinout:

Pin# Pin name Function GPIO Alternate function
1 3.3V - -
2 DGND Ground -
3 GPIO_IN_0 GPIO4_IO08 UART5_TX
4 GPIO_OUT_0 GPIO4_IO15 UART5_CTS / FLEXCAN2_RX
5 GPIO_IN_1 GPIO4_IO09 UART5_RX
6 GPIO_OUT_1 GPIO1_IO06
7 GPIO_IN_2 GPIO4_IO10 FLEXCAN1_TX
8 GPIO_OUT_2 GPIO5_IO28 UART1_TX
9 GPIO_IN_3 GPIO4_IO11 FLEXCAN1_RX
10 GPIO_OUT_3 GPIO5_IO29 UART1_RX
11 GPIO_IN_4 GPIO4_IO14 UART5_RTS / FLEXCAN2_TX
12 GPIO_OUT_4 GPIO3_IO20 UART1_RTS