Bureaucrats, dave_user, Administrators
8,204
edits
Changes
no edit summary
==Introduction==
[[File:SDV04-Carrier-C1R.pngjpg|500px|frameless|border]]
SDV04 is a carrier board designed to host directly [[:Category:AXEL_ULite|AXEL ULITE]] and [[:Category:AxelLite|AXEL LITE]] SoMs. It exports major specific peripherals connectors for each SoMs.
The following picture shows SDV04's block diagram:
[[File:SDV04-block diagramSDV04_BD.png|700px|frameless|border|centre]]
==Connection layout==
The following picture shows SDV04's connection layout:
[[File:SFCZG-connectors-C1R.png|700px|frameless|border|centre]]
== Features ==
* Single/Dual channel LVDS connector - for AxelLite SOM
* Single channel LVDS connector - for AxelUlite SOM
* Backlight (5V, 12V or current driving)
* I2C touch connector
* Audio connector with internal power amplifier
* Pin strip expansion connectors for GPIOs
* Battery connector (for internal iMX6 RTC)
== Connectors pinout ==
=== J16 - PSU ===
J16 is a Molex 26-60-4020 Wurth 691321100002 2x1-pn pin 0.138" (3.56mm 50mm) pitch connector. The following table reports the connector's pinout:
{| class="wikitable"
J1 is a TE Connectivity 204-pin SODIMM socket. The pinout matches the [[Pinout_(AxelLite) | Axel Lite pinout]] and the [[Pinout_(AXEL_ULite) | Axel ULite pinout]].
=== J6 - JTAG ===
|-
|}
=== J18 - boot mode ===
J18 is a 6x1-pin, 2.54mm pitch header, pinstrip connector. The following table reports the connector's pinout:
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|1-2 || Boot || Boot from internal storage or microSD || Select storage device
|-
|3-4 || Reserved || - || Do Not Shortcircuit
|-
|5-6 || Reserved || - || Do Not Shortcircuit
|-
|}
=== MicroSD - J13 ===
J13 is a microSD memory card connector. It can be used as a <b>boot device</b> properly configuring the J18 pin header connector.
The following table reports the connector's pinout:
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|1 ||SD1_DAT2||| DATA[2] || -
|-
|2 ||SD1_DAT3||| Card Detect/DATA[3] || -
|-
|3 ||SD1_CMD||| CMD line || -
|-
|4 ||VDD||| 3.3V Power Supply || -
|-
|5 ||SD1_CLK||| Clock || -
|-
|6, 9, 10, 11, 12 ||DGND||| - || -
|-
|7 ||SD1_DAT0||| DATA[0] || -
|-
|8 ||SD1_DAT1||| DATA[1] || -
|-
|13 ||SD1_CD|| Card detect || -
|-
|}
=== Ethernet - J10 ===
Standard RJ-45 connector for 10/100Mbit/s
=== USB HOST - J11 ===
|}
=== USB OTG - J12 (only on AxelLite model) ===
J12 is a Molex 53398-0471 4 pin connector. It can be used both as Host or OTG connector depending on internal USB_OTG_ID signal connection
The following table reports the connector's pinout:
|-
|4 ||DGND || Ground || -
|-
|}
=== RS232 - J7 ===
J7 is a Molex 85513-5013 8 pin connector.
The following table reports the connector's pinout:
{| class="wikitable"
|-
!Pin#
!Pin name
!Function
!Notes
|-
|2 ||RS232 RX || Receive data || -
|-
|3 ||RS232 TX || Transmit Data || -
|-
|5 ||DGND || Ground || -
|-
|}
|}
=== LVDS - J20 - (for Axel ULite SOM)===
J20 is a 10x2 DF13A-20DP header. The following table reports the connector's pinout:
|1, 2 ||3.3V_LCD0 || +3.3V || -
|-
|4, 7, 10,<br>13, 16, 19, 21, 22 ||DGND || Ground || -
|-
|3 || GPIO || VDD or GND (internal mount) || -Connected to 3V3_LCD
|-
|5 || LVDS_TX0_N || TX0- || -
|19 || GPIO || VDD or GND (internal mount) || -
|-
|20 || BL EN || Backligth Enable || -Connected to 3V3_LCD
|-
|}
=== MicroSD LVDS0/LVDS1 - J13 J21 - (for AxelLite SOM)===
{| class="wikitable"
!Notes
|-
|1 , 3 ||SD1_DAT23.3V_LCD ||+3.3V || -|-|5, 6, 11, 12, 17<br>23, 26, 29, 32, 35 ||DGND || Ground || -|-|14, 16, 18 || 5V_LCD || +5V LCD Backlight || -|-|20, 22, 24 || 12V_LCD || +12V LCD Backlight || -|-| DATA[2] || LVDS0_TX1_N || TX1- (Odd) || -|-|4 || LVDS0_TX1_P || TX1+ (Odd) || -|-|7 || LVDS0_TX0_N || TX0- (Odd) || -|-|8 || LVDS0_TX3_N || TX3- (Odd) || -|-|9 || LVDS0_TX0_P|| TX0+ (Odd) || -|-|10 || LVDS0_TX3_P || TX3+ (Odd) || -|-|13 || LVDS0_TX2_N || TX2- (Odd) || -|-|15 || LVDS0_TX2_P || TX2+ (Odd) || -|-|19 || LVDS0_CLK_N || CLK- (Odd) || -|-|21 || LVDS0_CLK_P || CLK+ (Odd) || -|-|25 || LVDS1_TX0_N || TX0- (Even) || -|-|27 || LVDS1_TX0_P || TX0+ (Even) || -|-|28 || LVDS1_TX1_N || TX1- (Even) || -|-|30 || LVDS1_TX1_P || TX1+ (even) || -
|-
|2 31 ||SD1_DAT3LVDS1_TX2_N ||| Card Detect/DATA[3] TX2- (Even) || -
|-
|3 33 ||SD1_CMDLVDS1_TX2_P ||| CMD line TX2+ (even) || -
|-
|4 34 ||VDDLVDS1_CLK_N ||| 3.3V Power Supply CLK- (Even) || -
|-
|5 36 ||SD1_CLKLVDS1_CLK_P ||| Clock CLK+ (Even) || -
|-
|6, 9, 10, 11, 12 37 ||DGND|LVDS1_TX3_N || TX3- (Even) || -
|-
|7 38 ||SD1_DAT0BL PWM ||| DATA[0] Backlight PWM control || -
|-
|8 39 ||SD1_DAT1LVDS1_TX3_P ||| DATA[1] TX3+ (even) || -
|-
|13 40 ||SD1_CDBL EN || Card detect Backligth Enable || -
|-
|}
=== Audio - J14 (only on AxelLite model) ===
J14 is a 53375-0610 Molex 6x2.5mm pin connector.
|}
=== GPIO expander - JP1 - (for Axel ULite SOM)=== JP1 is a 2x6-pin strip connectors , 2.54mm pitch header, pinstrip connector. The following table reports the connector's pinout: {| class="wikitable" |-!Pin# !Pin name!Function!GPIO!Alternate function|-|1 || 3.3V|| - || -||-|2 || DGND|| Ground || -||-|3 || GPIO_IN_0 || || GPIO2_IO09|I2C3_SDA, UART6_RX|-|4 || GPIO_OUT_0 || || GPIO2_IO12|ECSPI4_SCLK, UART8_TX|-|5 || GPIO_IN_1 || || GPIO2_IO08|I2C3_SCL, UART6_TX|-|6 || GPIO_OUT_1 || || GPIO1_IO00|I2C2_SCL|-|7 || GPIO_IN_2 || || GPIO2_IO11|I2C4_SDA, UART7_RX|-|8 || GPIO_OUT_2 || || GPIO4_IO24|ECSPI2_MISO|-|9 || GPIO_IN_3 || || GPIO2_IO10|I2C4_SCL, UART7_TX|-|10 || GPIO_OUT_3 || || GPIO4_IO22|ECSPI2_SS0|-|11 || GPIO_IN_4 || || GPIO2_IO13|ECSPI4_MOSI, UART8_RX|-|12 || GPIO_OUT_4 || || GPIO1_IO23|ECSPI3_MISO|-|}=== GPIO expander - JP1 - (for Axel Lite SOM)===
JP1 is a 2x6-pin, 2.54mm pitch header, pinstrip connector. The following table reports the connector's pinout:
!Pin name
!Function
!NotesGPIO!Alternate function
|-
|1 || 3.3V|| - || -
|
|-
|2 || DGND|| Ground || -
|
|-
|3 || GPIO_IN_0 || || -GPIO4_IO08|UART5_TX
|-
|4 || GPIO_OUT_0 || || -GPIO4_IO15|UART5_CTS / FLEXCAN2_RX
|-
|5 || GPIO_IN_1 || || -GPIO4_IO09|UART5_RX
|-
|6 || GPIO_OUT_1 || || -GPIO1_IO06|
|-
|7 || GPIO_IN_2 || || -GPIO4_IO10|FLEXCAN1_TX
|-
|8 || GPIO_OUT_2 || || -GPIO5_IO28|UART1_TX
|-
|9 || GPIO_IN_3 || || -GPIO4_IO11|FLEXCAN1_RX
|-
|10 || GPIO_OUT_3 || || -GPIO5_IO29|UART1_RX
|-
|11 || GPIO_IN_4 || || -GPIO4_IO14|UART5_RTS / FLEXCAN2_TX
|-
|12 || GPIO_OUT_4 || || -GPIO3_IO20|UART1_RTS
|-
|}