View source for SBCD-AN-001: Using the CAN interface

← SBCD-AN-001: Using the CAN interface

You do not have permission to edit this page, for the following reason:

Access to this wiki is restricted: please go to the login page or contact our helpdesk to get your credential

You can view and copy the source of this page.

== Introduction ==
SBC Diva has two CAN interface available on J40 connector. 
In order to enable the CAN interface, the correct device tree configuration must be passed to the kernel. The SBCD comes with both CAN interface enabled into its devicetree configuration.

Return to SBCD-AN-001: Using the CAN interface.

Retrieved from "https://wiki.dave.eu/index.php/SBCD-AN-001:_Using_the_CAN_interface"