Changes

The INT1 signal on the PMIC (default active low) warns the host processor of any event that has occurred on the TPS659113 device. The host processor can then poll the interrupt from the interrupt status register through I2C to identify the interrupt source. This  == Interrupt pin ==  * On Naon/Dido: the INT1 signal is connected to the G6 DM814x microprocessor ball, corresponding to the MCA[3]_ACLKX/GP0[16] pin (please * On Maya: the INT1 signal is connected to the Y23 DM814x microprocessor ball, corresponding to the VOUT[1]_G_Y_YC[3]/EMAC[1]_MRXD[6]/VIN[1]A_D[8]/PATA_D[0]/GP3[7] pin Please refer to the DM814x Datasheet)for more information on microprocessor pins.