Programmable logic (BoraLite)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
Programmable logicEdit
IntroductionEdit
The following paragraphs describe in detail the available PL I/O pins and how they are routed to the BORA Lite connector. The Zynq-7000 AP SoC is split into I/O banks to allow for flexibility in the choice of I/O standards, thus each table reports one bank configuration. Moreover, Bora Lite design allows carrier board to power two PL banks in order to achieve complete flexibility in terms of I/O voltage levels too. For more details about PCB design considerations, please refer to the Advanced routing and carrier board design guidelines article.
The following table reports the I/O banks characteristics:
| FPGA Bank | Type | I/O Voltage | Voltage Pins | Notes |
|---|---|---|---|---|
| Bank 13 | High range (HR) | User defined VIO=FPGA_VDDIO_BANK13 1.8 to 3.3V |
J1.41 J1.67 J3.97 J3.98 J3.99 |
Bank 13 is available only with Zynq XC7Z020 part number. Although this bank is not available on Bora SOMs equipped with the XC7Z010 SOC, VDDIO_BANK13 pins must not be left open and must be connected anyway, either to ground or to an external I/O voltage. |
| Bank 34 | High range (HR) | User defined VIO=FPGA_VDDIO_BANK34 1.8 to 3.3V |
J1.77 J1.124 J1.127 J1.129 |
|
| Bank 35 | High range (HR) | User defined VIO=FPGA_VDDIO_BANK35 1.8 to 3.3V |
J1.186 J1.188 J1.192 J1.201 |
Each user I/O is labeled IO_LXXY_Tn_ZZZ_ADi_#, where:
- IO indicates a user I/O pin.
- L indicates a differential pair, with XX a unique pair in the bank and Y = [P|N] for the positive/negative sides of the differential pair.
- Tn indicates the memory byte group [0-3]
- ZZZ indicates a MRCC, SRCC or DQS pin
- ADi indicates a XADC (analog-to-digital converter) differential auxiliary analog input [0–15].
- # indicates the bank number.
Highlighted rows are related to signals that are used for particular functions into the SOM.
FPGA Bank 13 (Zynq 7020 only)Edit
N.B. Although BANK 13 is not available on Bora SOMs equipped with the XC7Z010 SOC, VDDIO_BANK13 pins must not be left open and must be connected anyway, either to ground or to an external I/O voltage as described in I/O banks table.
The following table reports the available pins connected to bank 13:
| Pin Name | Conn. Pin | Notes |
| IO_L11P_T1_SRCC_13 | J1.49 | |
| IO_L11N_T1_SRCC_13 | J1.51 | |
| IO_L12P_T1_MRCC_13 | J1.62 | |
| IO_L12N_T1_MRCC_13 | J1.64 | |
| IO_L13N_T2_MRCC_13 | J1.53 | |
| IO_L13P_T2_MRCC_13 | J1.55 | |
| IO_L14N_T2_SRCC_13 | J1.69 | |
| IO_L14P_T2_SRCC_13 | J1.71 | |
| IO_L15N_T2_DQS_13 | J1.59 | |
| IO_L15P_T2_DQS_13 | J1.61 | |
| IO_L16P_T2_13 | J1.63 | |
| IO_L16N_T2_13 | J1.65 | |
| IO_L17N_T2_13 | J1.58 | |
| IO_L17P_T2_13 | J1.60 | |
| IO_L18P_T2_13 | J1.70 | |
| IO_L18N_T2_13 | J1.72 | |
| IO_L19P_T3_13 | J1.66 | |
| IO_L19N_T3_VREF_13 | J1.68 | |
| IO_L20P_T3_13 | J1.78 | |
| IO_L20N_T3_13 | J1.80 | |
| IO_L21N_T3_DQS_13 | J1.74 | |
| IO_L21P_T3_DQS_13 | J1.76 | |
| IO_L22P_T3_13 | J1.45 | |
| IO_L22N_T3_13 | J1.47 | |
| IO_L6N_T0_VREF_13 | J1.43 |
Routing informationEdit
Routing implemented on Bora SoM allows the use of bank 13's signals as differential pairs as well as single-ended lines. Signals are grouped as denoted by the following table that details routing rules on Bora module. No carrier board guidelines can be provided, because these are application-dependent.
Pairs are highlighted with different colors. When used as differential pairs, differential impedence is 100 Ohm. When used as single-ended signals, impedence is 50 Ohm.
| Bora pin name | Individual net length [mils] |
Intra-pair match [mils] |
Inter-pair match [mils] |
Group Name |
| IO_L11N_T1_SRCC_13 | 963.29 | 5 | 360 | BANK13 Diff group 1 |
| IO_L11P_T1_SRCC_13 | 965.44 | 5 | 360 | BANK13 Diff group 1 |
| IO_L12N_T1_MRCC_13 | 1002.27 | 5 | 360 | BANK13 Diff group 1 |
| IO_L12P_T1_MRCC_13 | 998.73 | 5 | 360 | BANK13 Diff group 1 |
| IO_L13N_T2_MRCC_13 | 819.57 | 5 | 360 | BANK13 Diff group 1 |
| IO_L13P_T2_MRCC_13 | 819.57 | 5 | 360 | BANK13 Diff group 1 |
| IO_L14N_T2_SRCC_13 | 820.26 | 5 | 360 | BANK13 Diff group 1 |
| IO_L14P_T2_SRCC_13 | 821.43 | 5 | 360 | BANK13 Diff group 1 |
| IO_L15N_T2_DQS_13 | 885.06 | 5 | 360 | BANK13 Diff group 1 |
| IO_L15P_T2_DQS_13 | 885.06 | 5 | 360 | BANK13 Diff group 1 |
| IO_L16N_T2_13 | 922.83 | 5 | 360 | BANK13 Diff group 1 |
| IO_L16P_T2_13 | 922.83 | 5 | 360 | BANK13 Diff group 1 |
| IO_L17N_T2_13 | 1007.3 | 5 | 360 | BANK13 Diff group 1 |
| IO_L17P_T2_13 | 1008.75 | 5 | 360 | BANK13 Diff group 1 |
| IO_L18N_T2_13 | 827.46 | 5 | 360 | BANK13 Diff group 1 |
| IO_L18P_T2_13 | 829.35 | 5 | 360 | BANK13 Diff group 1 |
| IO_L19N_T3_VREF_13 | 802.16 | 5 | 360 | BANK13 Diff group 1 |
| IO_L19P_T3_13 | 802.16 | 5 | 360 | BANK13 Diff group 1 |
| IO_L20N_T3_13 | 653.65 | 5 | 360 | BANK13 Diff group 1 |
| IO_L20P_T3_13 | 655.59 | 5 | 360 | BANK13 Diff group 1 |
| IO_L21N_T3_DQS_13 | 738.09 | 5 | 360 | BANK13 Diff group 1 |
| IO_L21P_T3_DQS_13 | 735.9 | 5 | 360 | BANK13 Diff group 1 |
| IO_L22N_T3_13 | 969.5 | 5 | 360 | BANK13 Diff group 1 |
| IO_L22P_T3_13 | 970.21 | 5 | 360 | BANK13 Diff group 1 |
FPGA Bank 34Edit
The following table reports the available pins connected to bank 34:
| Pin Name | Conn. Pin | Notes |
| IO_0_34 | J1.79 | |
| IO_25_34 | J1.81 | |
| IO_L1P_T0_34 | J1.84 | |
| IO_L1N_T0_34 | J1.86 | |
| IO_L2P_T0_34 | J1.93 | |
| IO_L2N_T0_34 | J1.95 | |
| IO_L3N_T0_DQS_34 | J1.88 | |
| IO_L3P_T0_DQS_PUDC_B_34 | J1.90 | Internally connected to a 10K pull-up to VDDIO_BANK34 |
| IO_L4P_T0_34 | J1.97 | |
| IO_L4N_T0_34 | J1.99 | |
| IO_L5N_T0_34 | J1.92 | |
| IO_L5P_T0_34 | J1.94 | |
| IO_L6P_T0_34 | J1.110 | |
| IO_L6N_T0_VREF_34 | J1.112 | |
| IO_L7P_T1_34 | J1.89 | |
| IO_L7N_T1_34 | J1.91 | |
| IO_L8N_T1_34 | J1.83 | |
| IO_L8P_T1_34 | J1.85 | |
| IO_L9P_T1_DQS_34 | J1.106 | |
| IO_L9N_T1_DQS_34 | J1.108 | |
| IO_L10P_T1_34 | J1.96 | |
| IO_L10N_T1_34 | J1.98 | |
| IO_L11P_T1_SRCC_34 | J1.105 | |
| IO_L11N_T1_SRCC_34 | J1.107 | |
| IO_L12P_T1_MRCC_34 | J1.130 | Optionally internally connected to RTC/INT_SQW |
| IO_L12N_T1_MRCC_34 | J1.132 | |
| IO_L13N_T2_MRCC_34 | J1.138 | |
| IO_L13P_T2_MRCC_34 | J1.140 | Optionally internally connected to RTC_32KHZ |
| IO_L14P_T2_SRCC_34 | J1.142 | |
| IO_L14N_T2_SRCC_34 | J1.144 | |
| IO_L15P_T2_DQS_34 | J1.118 | |
| IO_L15N_T2_DQS_34 | J1.120 | |
| IO_L16N_T2_34 | J1.115 | |
| IO_L16P_T2_34 | J1.117 | |
| IO_L17P_T2_34 | J1.111 | |
| IO_L17N_T2_34 | J1.113 | |
| IO_L18P_T2_34 | J1.101 | |
| IO_L18N_T2_34 | J1.103 | |
| IO_L19N_T3_VREF_34 | J1.116 | |
| IO_L19P_T3_34 | J1.114 | |
| IO_L20P_T3_34 | J1.134 | |
| IO_L20N_T3_34 | J1.136 | |
| IO_L21P_T3_DQS_34 | J1.102 | |
| IO_L21N_T3_DQS_34 | J1.104 | |
| IO_L22P_T3_34 | J1.126 | |
| IO_L22N_T3_34 | J1.128 | |
| IO_L23N_T3_34 | J1.123 | |
| IO_L23P_T3_34 | J1.125 | |
| IO_L24P_T3_34 | J1.119 | |
| IO_L24N_T3_34 | J1.121 |
Routing informationEdit
Routing implemented on Bora SoM allows the use of bank 34's signals as differential pairs as well as single-ended lines. Signals are grouped as denoted by the following table that details routing rules on Bora module. No carrier board guidelines can be provided, because these are application-dependent.
Pairs are highlighted with different colors. When used as differential pairs, differential impedence is 100 Ohm. When used as single-ended signals, impedence is 50 Ohm.
| Bora pin name | Individual trace length [mils] |
Intra-pair match [mils] |
Inter-pair match [mils] |
Group name |
| IO_L1N_T0_34 | 821.99 | 5 | 440 | BANK34 Diff group 1 |
| IO_L1P_T0_34 | 821.78 | 5 | 440 | BANK34 Diff group 1 |
| IO_L2N_T0_34 | 679.01 | 5 | 440 | BANK34 Diff group 1 |
| IO_L2P_T0_34 | 684 | 5 | 440 | BANK34 Diff group 1 |
| IO_L3N_T0_DQS_34 | 701.84 | 5 | 440 | BANK34 Diff group 1 |
| IO_L3P_T0_DQS_PUDC_B_34 | 1166.67 | 5 | 440 | BANK34 Diff group 1 |
| IO_L4N_T0_34 | 601.18 | 5 | 440 | BANK34 Diff group 1 |
| IO_L4P_T0_34 | 600.77 | 5 | 440 | BANK34 Diff group 1 |
| IO_L5N_T0_34 | 875.69 | 5 | 440 | BANK34 Diff group 1 |
| IO_L5P_T0_34 | 875.69 | 5 | 440 | BANK34 Diff group 1 |
| IO_L6N_T0_VREF_34 | 863.47 | 5 | 440 | BANK34 Diff group 1 |
| IO_L6P_T0_34 | 866.95 | 5 | 440 | BANK34 Diff group 1 |
| IO_L7N_T1_34 | 727.02 | 5 | 440 | BANK34 Diff group 1 |
| IO_L7P_T1_34 | 727.02 | 5 | 440 | BANK34 Diff group 1 |
| IO_L8N_T1_34 | 800.48 | 5 | 440 | BANK34 Diff group 1 |
| IO_L8P_T1_34 | 798.05 | 5 | 440 | BANK34 Diff group 1 |
| IO_L9N_T1_DQS_34 | 685.07 | 5 | 440 | BANK34 Diff group 1 |
| IO_L9P_T1_DQS_34 | 687.47 | 5 | 440 | BANK34 Diff group 1 |
| IO_L10N_T1_34 | 650.31 | 5 | 440 | BANK34 Diff group 1 |
| IO_L10P_T1_34 | 652.43 | 5 | 440 | BANK34 Diff group 1 |
| IO_L11N_T1_SRCC_34 | 640.93 | 5 | 440 | BANK34 Diff group 1 |
| IO_L11P_T1_SRCC_34 | 636.66 | 5 | 440 | BANK34 Diff group 1 |
| IO_L12N_T1_MRCC_34 | 702.74 | 5 | 440 | BANK34 Diff group 1 |
| IO_L12P_T1_MRCC_34 | 699.86 | 5 | 440 | BANK34 Diff group 1 |
| IO_L13N_T1_MRCC_34 | 844.5 | 5 | 440 | BANK34 Diff group 1 |
| IO_L13P_T1_MRCC_34 | 845.11 | 5 | 440 | BANK34 Diff group 1 |
| IO_L14N_T2_SRCC_34 | 864.85 | 5 | 440 | BANK34 Diff group 1 |
| IO_L14P_T2_SRCC_34 | 862.67 | 5 | 440 | BANK34 Diff group 1 |
| IO_L15N_T2_DQS_34 | 964.59 | 5 | 440 | BANK34 Diff group 1 |
| IO_L15P_T2_DQS_34 | 962.89 | 5 | 440 | BANK34 Diff group 1 |
| IO_L16N_T2_34 | 778.96 | 5 | 440 | BANK34 Diff group 1 |
| IO_L16P_T2_34 | 783.24 | 5 | 440 | BANK34 Diff group 1 |
| IO_L17N_T2_34 | 526.33 | 5 | 440 | BANK34 Diff group 1 |
| IO_L17P_T2_34 | 530.25 | 5 | 440 | BANK34 Diff group 1 |
| IO_L18N_T2_34 | 657.33 | 5 | 440 | BANK34 Diff group 1 |
| IO_L18P_T2_34 | 659.75 | 5 | 440 | BANK34 Diff group 1 |
| IO_L19N_T3_VREF_34 | 723.97 | 5 | 440 | BANK34 Diff group 1 |
| IO_L19P_T3_34 | 727.5 | 5 | 440 | BANK34 Diff group 1 |
| IO_L20N_T3_34 | 728.21 | 5 | 440 | BANK34 Diff group 1 |
| IO_L20P_T3_34 | 728.25 | 5 | 440 | BANK34 Diff group 1 |
| IO_L21N_T3_DQS_34 | 654.43 | 5 | 440 | BANK34 Diff group 1 |
| IO_L21P_T3_DQS_34 | 651.31 | 5 | 440 | BANK34 Diff group 1 |
| IO_L22N_T3_34 | 575.33 | 5 | 440 | BANK34 Diff group 1 |
| IO_L22P_T3_34 | 579.66 | 5 | 440 | BANK34 Diff group 1 |
| IO_L23N_T3_34 | 856.78 | 5 | 440 | BANK34 Diff group 1 |
| IO_L23P_T3_34 | 857.76 | 5 | 440 | BANK34 Diff group 1 |
| IO_L24N_T3_34 | 922.14 | 5 | 440 | BANK34 Diff group 1 |
| IO_L24P_T3_34 | 923.87 | 5 | 440 | BANK34 Diff group 1 |
FPGA Bank 35Edit
The following table reports the available pins connected to bank 35:
| Pin Name | Conn. Pin | Notes |
| IO_0_35 | J1.155 | |
| IO_25_35 | J1.157 | |
| IO_L1N_T0_AD0N_35 | J1.193 | |
| IO_L1P_T0_AD0P_35 | J1.195 | |
| IO_L2P_T0_AD8P_35 | J1.197 | |
| IO_L2N_T0_AD8N_35 | J1.199 | |
| IO_L3P_T0_DQS_AD1P_35 | J1.185 | |
| IO_L3N_T0_DQS_AD1N_35 | J1.187 | |
| IO_L4P_T0_35 | J1.182 | |
| IO_L4N_T0_35 | J1.184 | |
| IO_L5P_T0_AD9P_35 | J1.174 | |
| IO_L5N_T0_AD9N_35 | J1.176 | |
| IO_L6N_T0_VREF_35 | J1.177 | |
| IO_L6P_T0_35 | J1.179 | |
| IO_L7P_T1_AD2P_35 | J1.133 | |
| IO_L7N_T1_AD2N_35 | J1.135 | |
| IO_L8N_T1_AD10N_35 | J1.137 | |
| IO_L8P_T1_AD10P_35 | J1.139 | |
| IO_L9P_T1_DQS_AD3P_35 | J1.159 | |
| IO_L9N_T1_DQS_AD3N_35 | J1.161 | |
| IO_L10P_T1_AD11P_35 | J1.145 | |
| IO_L10N_T1_AD11N_35 | J1.147 | |
| IO_L11N_T1_SRCC_35 | J1.141 | |
| IO_L11P_T1_SRCC_35 | J1.143 | |
| IO_L12N_T1_MRCC_35 | J1.171 | |
| IO_L12P_T1_MRCC_35 | J1.173 | |
| IO_L13P_T2_MRCC_35 | J1.189 | |
| IO_L13N_T2_MRCC_35 | J1.191 | |
| IO_L14P_T2_AD4P_SRCC_35 | J1.149 | |
| IO_L14N_T2_AD4N_SRCC_35 | J1.151 | |
| IO_L15N_T2_DQS_AD12N_35 | J1.152 | |
| IO_L15P_T2_DQS_AD12P_35 | J1.154 | |
| IO_L16N_T2_35 | J1.178 | |
| IO_L16P_T2_35 | J1.180 | |
| IO_L17P_T2_AD5P_35 | J1.163 | |
| IO_L17N_T2_AD5N_35 | J1.165 | |
| IO_L18P_T2_AD13P_35 | J1.148 | |
| IO_L18N_T2_AD13N_35 | J1.150 | |
| IO_L19N_T3_VREF_35 | J1.181 | |
| IO_L19P_T3_35 | J1.183 | |
| IO_L20P_T3_AD6P_35 | J1.160 | |
| IO_L20N_T3_AD6N_35 | J1.162 | |
| IO_L21P_T3_DQS_AD14P_35 | J1.167 | |
| IO_L21N_T3_DQS_AD14N_35 | J1.169 | |
| IO_L22N_T3_AD7N_35 | J1.156 | |
| IO_L22P_T3_AD7P_35 | J1.158 | |
| IO_L23N_T3_35 | J1.166 | |
| IO_L23P_T3_35 | J1.168 | |
| IO_L24P_T3_AD15P_35 | J1.170 | |
| IO_L24N_T3_AD15N_35 | J1.172 |
Routing informationEdit
Routing implemented on Bora SoM allows the use of bank 35's signals as differential pairs as well as single-ended lines. Signals are grouped as denoted by the following table that details routing rules on Bora module. No carrier board guidelines can be provided, because these are application-dependent.
Pairs are highlighted with different colors. When used as differential pairs, differential impedence is 100 Ohm. When used as single-ended signals, impedence is 50 Ohm.
| Bora pin name | Individual trace length [mils] |
Intra-pair match [mils] |
Inter-pair match [mils] |
Group name |
| IO_L1N_T0_AD0N | 1653.52 | 5 | 930 | BANK35 Diff group 1 |
| IO_L1P_T0_AD0P | 1656.04 | 5 | 930 | BANK35 Diff group 1 |
| IO_L2N_T0_AD8N | 1830.25 | 5 | 930 | BANK35 Diff group 1 |
| IO_L2P_T0_AD8P | 1828.16 | 5 | 930 | BANK35 Diff group 1 |
| IO_L3N_T0_DQS_AD1N | 1487.81 | 5 | 930 | BANK35 Diff group 1 |
| IO_L3P_T0_DQS_AD1P | 1487.81 | 5 | 930 | BANK35 Diff group 1 |
| IO_L4N_T0 | 1450.82 | 5 | 930 | BANK35 Diff group 1 |
| IO_L4P_T0 | 1447.23 | 5 | 930 | BANK35 Diff group 1 |
| IO_L5N_T0_AD9N | 1394.95 | 5 | 930 | BANK35 Diff group 1 |
| IO_L5P_T0_AD9P | 1394.98 | 5 | 930 | BANK35 Diff group 1 |
| IO_L6N_T0_VREF | 1501.68 | 5 | 930 | BANK35 Diff group 1 |
| IO_L6P_T0 | 1499.17 | 5 | 930 | BANK35 Diff group 1 |
| IO_L7N_T1_AD2N | 903.67 | 5 | 930 | BANK35 Diff group 1 |
| IO_L7P_T1_AD2P | 900.45 | 5 | 930 | BANK35 Diff group 1 |
| IO_L8N_T1_AD10N | 1106.07 | 5 | 930 | BANK35 Diff group 1 |
| IO_L8P_T1_AD10P | 1106.37 | 5 | 930 | BANK35 Diff group 1 |
| IO_L9N_T1_DQS_AD3N | 1010.9 | 5 | 930 | BANK35 Diff group 1 |
| IO_L9P_T1_DQS_AD3P | 1011.88 | 5 | 930 | BANK35 Diff group 1 |
| IO_L10N_T1_AD11N | 1132.74 | 5 | 930 | BANK35 Diff group 1 |
| IO_L10P_T1_AD11P | 1132.24 | 5 | 930 | BANK35 Diff group 1 |
| IO_L11N_T1_SRCC | 1083.67 | 5 | 930 | BANK35 Diff group 1 |
| IO_L11P_T1_SRCC | 1086.34 | 5 | 930 | BANK35 Diff group 1 |
| IO_L12N_T1_MRCC | 1266.88 | 5 | 930 | BANK35 Diff group 1 |
| IO_L12P_T1_MRCC | 1266.88 | 5 | 930 | BANK35 Diff group 1 |
| IO_L13N_T2_MRCC | 1561.25 | 5 | 930 | BANK35 Diff group 1 |
| IO_L13P_T2_MRCC | 1565.9 | 5 | 930 | BANK35 Diff group 1 |
| IO_L14N_T2_AD4N_SRCC | 1310.96 | 5 | 930 | BANK35 Diff group 1 |
| IO_L14P_T2_AD4P_SRCC | 1314.72 | 5 | 930 | BANK35 Diff group 1 |
| IO_L15N_T2_DQS_AD12N | 1390.3 | 5 | 930 | BANK35 Diff group 1 |
| IO_L15P_T2_DQS_AD12P | 1390.3 | 5 | 930 | BANK35 Diff group 1 |
| IO_L16N_T2 | 1328.03 | 5 | 930 | BANK35 Diff group 1 |
| IO_L16P_T2 | 1323.99 | 5 | 930 | BANK35 Diff group 1 |
| IO_L17N_T2_AD5N | 1066.44 | 5 | 930 | BANK35 Diff group 1 |
| IO_L17P_T2_AD5P | 1066.44 | 5 | 930 | BANK35 Diff group 1 |
| IO_L18N_T2_AD13N | 1274.72 | 5 | 930 | BANK35 Diff group 1 |
| IO_L18P_T2_AD13P | 1271.59 | 5 | 930 | BANK35 Diff group 1 |
| IO_L19N_T3_VREF | 1491.93 | 5 | 930 | BANK35 Diff group 1 |
| IO_L19P_T3 | 1490.98 | 5 | 930 | BANK35 Diff group 1 |
| IO_L20N_T3_AD6N | 1348.54 | 5 | 930 | BANK35 Diff group 1 |
| IO_L20P_T3_AD6P | 1348.54 | 5 | 930 | BANK35 Diff group 1 |
| IO_L21N_T3_DQS_AD14N | 1217.94 | 5 | 930 | BANK35 Diff group 1 |
| IO_L21P_T3_DQS_AD14P | 1219.83 | 5 | 930 | BANK35 Diff group 1 |
| IO_L22N_T3_AD7N | 1209.1 | 5 | 930 | BANK35 Diff group 1 |
| IO_L22P_T3_AD7P | 1212.95 | 5 | 930 | BANK35 Diff group 1 |
| IO_L23N_T3 | 1279.78 | 5 | 930 | BANK35 Diff group 1 |
| IO_L23P_T3 | 1282 | 5 | 930 | BANK35 Diff group 1 |
| IO_L24N_T3_AD15N | 1282.1 | 5 | 930 | BANK35 Diff group 1 |
| IO_L24P_T3_AD15P | 1279.15 | 5 | 930 | BANK35 Diff group 1 |