Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→Low-power idle
[2] 24MHz active oscillator power consumption is included. As the board under test is equipped with iMX6UL revision 1.0, active oscillator is required to implement the fix described by errata ERR009455. Typical consumption of this oscillator is about 20mW. Future revision of the board will be populated with silicon revision 1.1 or newer. Thus active oscillator will be removed. For more details please refer to ''Chip Errata for the i.MX 6UltraLite''<ref name="IMX6ULCE">Freescale Semiconductor, ''Chip Errata for the i.MX 6UltraLite'', Rev. 0.1, 02/2016</ref>.
To configure the system to perform this test, the following commands have been used.
TBD
It is worth to remember that the use of <code>powersave</code> governor '''has a drawback in terms of system reactivity''', because processor is relatively slow to get out of the idle condition. This can lead to phenomena such as the UART RX FIFO overrun, shown in the following box{{efn|This is the same issue described [[Linux_and_interrupt_latency_(Axel)#A_real-word_case:_UART_RX_FIFO_overrun|here]].}}.:
<pre></pre>
==Deep-sleep mode (aka suspend)==