{{WorkInProgress}}This chapter contains the pinout description of the Naon module, grouped in four tables (two – odd and even pins – for each connector) that report the pin mapping of the two 140 pin Naon connectors.Each row in the pinout tables contains the following information:* Pin: reference to the connector pin* Pin Name: pin (signal) name on the Naon connectors* Internal connections: connections to the Naon components** CPU.<x> : pin connected to CPU pad named <x>** KEY.<x>: pin connected to the keypad controller** TSC.<x> : pin connected to the touchscreen controller** EEPROM.<x> : pin connected to the EEPROM** CAN.<x> : pin connected to the CAN transceiver** PMIC.<x> : pin connected to the Power Manager IC** LAN.<x> : pin connected to the LAN PHY** USB.<x> : pin connected to the USB transceiver** SV.<x>: pin connected to voltage supervisor** MTR: pin connected to voltage monitors* Ball/pin #: Component ball/pin number connected to signal* Supply Group: Power Supply Group* Type: pin type** I = Input** O = Output** Z = High impedance** S = Power supply voltage** G = Ground** A = Analog signal** Voltage: I/O voltage levels