Pinout (BORAXpress)
| HOME | SOMs | SBCs | ToloMEO Embedded Assistant |  GET A QUOTE
|
 ONLINE HELPDESK
|
| Roadmap | IoT Services | ML/AI services | Embedded Design Services |
Info Box
|
Contents
Introduction[edit | edit source]
This chapter contains the pinout description of the BORA Xpress module, grouped in six tables (two – odd and even pins – for each connector) that report the pin mapping of the three 140-pin BORA Xpress connectors. Each row in the pinout tables contains the following information:
- Pin: reference to the connector pin
- Pin Name: pin (signal) name on the BORA Xpress connectors
- Internal connections: connections to the BORA Xpress components
- CPU.<x> : pin connected to CPU (processing system) pad named <x>
- FPGA.<x>: pin connected to FPGA (programmable logic) pad named <x>
- CAN.<x> : pin connected to the CAN transceiver
- LAN.<x> : pin connected to the LAN PHY
- USB.<x> : pin connected to the USB transceiver
- NAND.<x>: pin connected to the flash NAND
- NOR.<x>: pin connected to the flash NOR
- SV.<x>: pin connected to voltage supervisor
- MTR: pin connected to voltage monitors
- Ball/pin #: Component ball/pin number connected to signal
- Supply Group: Power Supply Group
- Type: pin type
- I = Input
- O = Output
- D = Differential
- Z = High impedance
- S = Power supply voltage
- G = Ground
- A = Analog signal
- Voltage: I/O voltage levels
J1 odd pins (1 to 139)[edit | edit source]
| Pin | Pin Name | Internal Connections | Ball/pin # | Supply Group | Type | Voltage | Note |
| J1.1 | DGND | DGND | - | - | G | - | Digital ground |
| J1.3 | IO_25_VRP_35 | FPGA.IO_25_35/IO_25_VRP_35 | H5 | Bank 35 | I/O | User defined | Optional on-board pull-down |
| J1.5 | IO_L23P_T3_35 | FPGA.IO_L10P_T1_AD11P_35 | F2 | Bank 35 | I/O | User defined | |
| J1.7 | IO_L23N_T3_35 | FPGA.IO_L23N_T3_35 | F1 | Bank 35 | I/O | User defined | |
| J1.9 | IO_L21P_T3_DQS_AD14P_35 | FPGA.IO_L21P_T3_DQS_AD14P_35 | E4 | Bank 35 | I/O | User defined | |
| J1.11 | IO_L21N_T3_DQS_AD14N_35 | FPGA.IO_L21N_T3_DQS_AD14N_35 | E3 | Bank 35 | I/O | User defined | |
| J1.13 | DGND | DGND | - | - | - | - | Digital ground |
| J1.15 | IO_L19P_T3_35 | FPGA.IO_L19P_T3_35 | H4 | Bank 35 | I/O | User defined | |
| J1.17 | IO_L19N_T3_VREF_35 | FPGA.IO_L19N_T3_VREF_35 | H3 | Bank 35 | I/O | User defined | |
| J1.19 | DGND | DGND | - | - | G | - | Digital ground |
| J1.21 | IO_L17P_T2_AD5P_35 | FPGA.IO_L17P_T2_AD5P_35 | E2 | Bank 35 | I/O | User defined | |
| J1.23 | IO_L17N_T2_AD5N_35 | FPGA.IO_L17N_T2_AD5N_35 | D2 | Bank 35 | I/O | User defined | |
| J1.25 | IO_L15P_T2_DQS_AD12P_35 | FPGA.IO_L15P_T2_DQS_AD12P_35 | A2 | Bank 35 | I/O | User defined | |
| J1.27 | IO_L15N_T2_DQS_AD12N_35 | FPGA.IO_L15N_T2_DQS_AD12N_35 | A1 | Bank 35 | I/O | User defined | |
| J1.29 | DGND | DGND | - | - | G | - | Digital ground |
| J1.31 | IO_L13P_T2_MRCC_35 | FPGA.IO_L13P_T2_MRCC_35 | B4 | Bank 35 | I/O | User defined | |
| J1.33 | IO_L13N_T2_MRCC_35 | FPGA.IO_L13N_T2_MRCC_35 | B3 | Bank 35 | I/O | User defined | |
| J1.35 | DGND | DGND | - | - | G | - | Digital ground |
| J1.37 | IO_L11P_T1_SRCC_35 | FPGA.IO_L11P_T1_SRCC_35 | C6 | Bank 35 | I/O | User defined | |
| J1.39 | IO_L11N_T1_SRCC_35 | FPGA.IO_L11N_T1_SRCC_35 | C5 | Bank 35 | I/O | User defined | |
| J1.41 | IO_L9P_T1_DQS_AD3P_35 | FPGA.IO_L9P_T1_DQS_AD3P_35 | A7 | Bank 35 | I/O | User defined | |
| J1.43 | IO_L9N_T1_DQS_AD3N_35 | FPGA.IO_L9N_T1_DQS_AD3N_35 | A6 | Bank 35 | I/O | User defined | |
| J1.45 | IO_L7P_T1_AD2P_35 | FPGA.IO_L7P_T1_AD2P_35 | C8 | Bank 35 | I/O | User defined | |
| J1.47 | IO_L7N_T1_AD2N_35 | FPGA.IO_L7N_T1_AD2N_35 | B8 | Bank 35 | I/O | User defined | |
| J1.49 | DGND | DGND | - | - | G | - | Digital ground |
| J1.51 | IO_L5P_T0_AD9P_35 | FPGA.IO_L5P_T0_AD9P_35 | F5 | Bank 35 | I/O | User defined | |
| J1.53 | IO_L5N_T0_AD9N_35 | FPGA.IO_L5N_T0_AD9N_35 | E5 | Bank 35 | I/O | User defined | |
| J1.55 | IO_L3P_T0_DQS_AD1P_35 | FPGA.IO_L3P_T0_DQS_AD1P_35 | E8 | Bank 35 | I/O | User defined | |
| J1.57 | IO_L3N_T0_DQS_AD1N_35 | FPGA.IO_L3N_T0_DQS_AD1N_35 | D8 | Bank 35 | I/O | User defined | |
| J1.59 | DGND | DGND | - | - | G | - | Digital ground |
| J1.61 | IO_L1P_T0_AD0P_35 | FPGA.IO_L1P_T0_AD0P_35 | F7 | Bank 35 | I/O | User defined | |
| J1.63 | IO_L1N_T0_AD0N_35 | FPGA.IO_L1N_T0_AD0N_35 | E7 | Bank 35 | I/O | User defined | |
| J1.65 | DGND | DGND | - | - | G | - | Digital ground |
| J1.67 | VDDIO_BANK35 | S | |||||
| J1.69 | XADC_AGND | G | XADC analog ground (internally connected to DGND) | ||||
| J1.71 | XADC_AGND | G | XADC analog ground (internally connected to DGND) | ||||
| J1.73 | PS_MIO45_501 | CPU.PS_MIO45_501 | B14 | Bank 501 | I/O | 1.8V | |
| J1.75 | PS_MIO44_501 | CPU.PS_MIO44_501 | E10 | Bank 501 | I/O | 1.8V | |
| J1.77 | PS_MIO43_501 | CPU.PS_MIO43_501 | B12 | Bank 501 | I/O | 1.8V | |
| J1.79 | PS_MIO42_501 | CPU.PS_MIO42_501 | D15 | Bank 501 | I/O | 1.8V | |
| J1.81 | PS_MIO41_501 | CPU.PS_MIO41_501 | C15 | Bank 501 | I/O | 1.8V | |
| J1.83 | DGND | DGND | - | - | G | - | Digital ground |
| J1.85 | PS_MIO40_501 | CPU.PS_MIO40_501 | E9 | Bank 501 | I/O | 1.8V | |
| J1.87 | ETH_MDIO | CPU.PS_MIO53_501 | C11 | Bank 501 | I/O | 1.8V | 1kOhm pull-up |
| J1.89 | ETH_MDC | CPU.PS_MIO51_501 | D13 | Bank 501 | I/O | 1.8V | |
| J1.91 | ETH_LED1 | LAN.LED1/PME_N1 | 17 | - | 1.8V | 10kOhm pull-up | |
| J1.93 | ETH_LED2 | LAN.LED2 | 15 | - | 1.8V | 10kOhm pull-up | |
| J1.95 | DGND | DGND | - | - | G | - | Digital ground |
| J1.97 | ETH_TXRX1_M | LAN.TXRXM_B | 6 | D | |||
| J1.99 | ETH_TXRX1_P | LAN.TXRXP_B | 5 | D | |||
| J1.101 | DGND | DGND | - | - | G | - | Digital ground |
| J1.103 | ETH_TXRX0_M | LAN.ETH_TXRX0_M | 3 | D | |||
| J1.105 | ETH_TXRX0_P | LAN.ETH_TXRX0_P | 2 | D | |||
| J1.107 | DVDDH | LAN.DVDDH | 16 34 40 |
1.8V | |||
| J1.109 | RFU | - | - | - | - | - | Reserved fo future use. Must be left floating. |
| J1.111 | USBOTG_CPEN | USB.CPEN | 7 | 3.3V | |||
| J1.113 | OTG_VBUS | USB.OTG_VBUS | 2 | ||||
| J1.115 | OTG_ID | USB.ID | 1 | ||||
| J1.117 | DGND | DGND | - | - | G | - | Digital ground |
| J1.119 | SPI0_DQ3/MODE0/NAND_IO0 | CPU.PS_MIO5_500 NOR flash NAND flash |
CPU.A20 | Bank 500 | I/O | 3.3V | This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration. Default configuration: pull-up (BOOT_MODE[0]=1) |
| J1.121 | SPI0_DQ2/MODE2/NAND_IO2 | CPU.PS_MIO4_500 NOR flash NAND flash |
CPU.E19 | Bank 500 | I/O | 3.3V | This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration. Default configuration: pull-down (BOOT_MODE[2]=0) |
| J1.123 | SPI0_DQ1/MODE1/NAND_WE | CPU.PS_MIO3_500 NOR flash NAND flash |
CPU.F17 | Bank 500 | I/O | 3.3V | This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration. Default configuration: pull-down (BOOT_MODE[1]=0) |
| J1.125 | SPI0_DQ0/MODE3/NAND_ALE | CPU.PS_MIO2_500 NOR flash NAND flash |
CPU.A21 | Bank 500 | I/O | 3.3V | This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration. Default configuration: pull-down (BOOT_MODE[3]=0) |
| J1.127 | DGND | DGND | - | - | G | - | Digital ground |
| J1.129 | SPI0_SCLK/MODE4/NAND_IO1 | CPU.PS_MIO6_500 NOR flash NAND flash |
CPU.A19 | Bank 500 | I/O | 3.3V | This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration. Default configuration: pull-down (BOOT_MODE[4]=0) |
| J1.131 | NAND_BUSY | CPU.PS_MIO14_500 NOR flash NAND flash |
CPU.B17 | Bank 500 | I/O | 3.3V | 10kOhm pull-up |
| J1.133 | PS_MIO15_500 | CPU.PS_MIO15_500 WDT.WDI |
CPU.E17 WDT.1 |
Bank 500 | I/O | 3.3V | See also this page |
| J1.135 | RFU | - | - | - | - | - | Reserved fo future use. Must be left floating. |
| J1.137 | MEM_WPn | NAND.WP NOR.WP/IO2 |
NAND.19 NOR.C4 |
3.3V | |||
| J1.139 | DGND | DGND | - | - | G | - | Digital ground |
J1 even pins (2 to 140)[edit | edit source]
| Pin | Pin Name | Internal Connections | Ball/pin # | Supply Group | Type | Voltage | Note |
| J1.2 | VDDIO_BANK35 | S | |||||
| J1.4 | DGND | DGND | - | - | - | G | Digital ground |
| J1.6 | IO_L24P_T3_AD15P_35 | FPGA.IO_L24P_T3_AD15P_35 | H1 | Bank 35 | I/O | User defined | |
| J1.8 | IO_L24N_T3_AD15N_35 | FPGA.IO_L24N_T3_AD15N_35 | G1 | Bank 35 | I/O | User defined | |
| J1.10 | IO_L22P_T3_AD7P_35 | FPGA.IO_L22P_T3_AD7P_35 | G3 | Bank 35 | I/O | User defined | |
| J1.12 | IO_L22N_T3_AD7N_35 | FPGA.IO_L22N_T3_AD7N_35 | G2 | Bank 35 | I/O | User defined | |
| J1.14 | DGND | DGND | - | - | - | G | Digital ground |
| J1.16 | IO_L20P_T3_AD6P_35 | FPGA.IO_L20P_T3_AD6P_35 | G4 | Bank 35 | I/O | User defined | |
| J1.18 | IO_L20N_T3_AD6N_35 | FPGA.IO_L20N_T3_AD6N_35 | F4 | Bank 35 | I/O | User defined | |
| J1.20 | IO_L18P_T2_AD13P_35 | FPGA.IO_L20N_T3_AD6N_35 | B2 | Bank 35 | I/O | User defined | |
| J1.22 | IO_L18N_T2_AD13N_35 | FPGA.IO_L18N_T2_AD13N_35 | B1 | Bank 35 | I/O | User defined | |
| J1.24 | DGND | DGND | - | - | - | G | Digital ground |
| J1.26 | IO_L16P_T2_35 | FPGA.IO_L16P_T2_35 | D1 | Bank 35 | I/O | User defined | |
| J1.28 | IO_L16N_T2_35 | FPGA.IO_L16N_T2_35 | C1 | Bank 35 | I/O | User defined | |
| J1.30 | DGND | DGND | - | - | - | G | Digital ground |
| J1.32 | IO_L14P_T2_AD4P_SRCC_35 | FPGA.IO_L14P_T2_AD4P_SRCC_35 | D3 | Bank 35 | I/O | User defined | |
| J1.34 | IO_L14N_T2_AD4N_SRCC_35 | FPGA.IO_L14N_T2_AD4N_SRCC_35 | C3 | Bank 35 | I/O | User defined | |
| J1.36 | IO_L12P_T1_MRCC_35 | FPGA.IO_L12P_T1_MRCC_35 | D5 | Bank 35 | I/O | User defined | |
| J1.38 | DGND | DGND | - | - | - | G | Digital ground |
| J1.40 | IO_L12N_T1_MRCC_35 | FPGA.IO_L12N_T1_MRCC_35 | C4 | Bank 35 | I/O | User defined | |
| J1.42 | IO_L10P_T1_AD11P_35 | FPGA.IO_L10P_T1_AD11P_35 | A5 | Bank 35 | I/O | User defined | |
| J1.44 | IO_L10N_T1_AD11N_35 | FPGA.IO_L10N_T1_AD11N_35 | A4 | Bank 35 | I/O | User defined | |
| J1.46 | IO_L8P_T1_AD10P_35 | FPGA.IO_L8P_T1_AD10P_35 | B7 | Bank 35 | I/O | User defined | |
| J1.48 | DGND | DGND | - | - | - | G | Digital ground |
| J1.50 | IO_L8N_T1_AD10N_35 | FPGA.IO_L8N_T1_AD10N_35 | B6 | Bank 35 | I/O | User defined | |
| J1.52 | IO_L6P_T0_35 | FPGA.IO_L6P_T0_35 | G6 | Bank 35 | I/O | User defined | |
| J1.54 | IO_L6N_T0_VREF_35 | FPGA.IO_L6N_T0_VREF_35 | F6 | Bank 35 | I/O | User defined | |
| J1.56 | IO_L4P_T0_35 | FPGA.IO_L4P_T0_35 | G8 | Bank 35 | I/O | User defined | |
| J1.58 | IO_L4N_T0_35 | FPGA.IO_L4N_T0_35 | G7 | Bank 35 | I/O | User defined | |
| J1.60 | DGND | DGND | - | - | - | G | Digital ground |
| J1.62 | IO_L2P_T0_AD8P_35 | FPGA.IO_L2P_T0_AD8P_35 | D7 | Bank 35 | I/O | User defined | |
| J1.64 | IO_L2N_T0_AD8N_35 | FPGA.IO_L2N_T0_AD8N_35 | D6 | Bank 35 | I/O | User defined | |
| J1.66 | VDDIO_BANK35 | S | |||||
| J1.68 | VDDIO_BANK35 | S | |||||
| J1.70 | XADC_AGND | G | XADC analog ground (internally connected to DGND) | ||||
| J1.72 | XADC_AGND | G | XADC analog ground (internally connected to DGND) | ||||
| J1.74 | IO_0_VRN_35 | FPGA.IO_0_35/IO_0_VRN_35 | H6 | Bank 35 | I/O | User defined | Optional on-board pull-up |
| J1.76 | RFU | - | - | - | - | - | Reserved fo future use. Must be left floating. |
| J1.78 | RFU | - | - | - | - | - | Reserved fo future use. Must be left floating. |
| J1.80 | PS_MIO49_501 | CPU.PS_MIO49_501 | C9 | Bank 501 | I/O | 1.8V | |
| J1.82 | PS_MIO48_501 | CPU.PS_MIO48_501 | D12 | Bank 501 | I/O | 1.8V | |
| J1.84 | PS_MIO47_501 | CPU.PS_MIO47_501 | B13 | Bank 501 | I/O | 1.8V | 10kOhm pull-up
TBD |
| J1.86 | DGND | DGND | - | - | - | G | Digital ground |
| J1.88 | PS_MIO46_501 | CPU.PS_MIO46_501 | D11 | Bank 501 | I/O | 1.8V | 10kOhm pull-up
TBD |
| J1.90 | ETH_INTn | Can be optionally connected to Ethernet PHY's INT_N / PME_N2 | |||||
| J1.92 | DGND | DGND | - | - | - | G | Digital ground |
| J1.94 | ETH_TXRX3_M | LAN.TXRXM_D | 11 | D | |||
| J1.96 | ETH_TXRX3_P | LAN.TXRXP_D | 10 | D | |||
| J1.98 | DGND | DGND | - | - | - | G | Digital ground |
| J1.100 | ETH_TXRX2_M | ||||||
| J1.102 | ETH_TXRX2_P | ||||||
| J1.104 | DGND | DGND | - | - | - | G | Digital ground |
| J1.106 | CLK125_NDO | LAN.CLK125_NDO | 41 | O | 1.8V | 10kOhm pull-up | |
| J1.108 | RFU | - | - | - | - | - | Reserved fo future use. Must be left floating. |
| J1.110 | RFU | - | - | - | - | - | Reserved fo future use. Must be left floating. |
| J1.112 | DGND | DGND | - | - | - | G | Digital ground |
| J1.114 | USBP1 | USB.DP | 6 | D | |||
| J1.116 | USBM1 | USB.DM | 5 | D | |||
| J1.118 | DGND | DGND | - | - | - | G | Digital ground |
| J1.120 | SPI0_CS0n | CPU.PS_MIO1_500 NOR flash |
CPU.A22 | Bank 500 | I/O | 3.3V | |
| J1.122 | NAND_CS0/SPI0_CS1 | CPU.PS_MIO0_500 NAND flash |
CPU.G17 | Bank 500 | I/O | 3.3V | 10kOhm pull-up |
| J1.124 | NAND_IO3 | CPU.PS_MIO13_500 NAND flash |
CPU.A17 | Bank 500 | I/O | 3.3V | |
| J1.126 | NAND_IO4 | CPU.PS_MIO9_500 NAND flash |
CPU.C19 | Bank 500 | I/O | 3.3V | |
| J1.128 | NAND_IO5 | CPU.PS_MIO10_500 NAND flash |
CPU.G16 | Bank 500 | I/O | 3.3V | |
| J1.130 | DGND | DGND | - | - | - | G | Digital ground |
| J1.132 | NAND_IO6 | CPU.PS_MIO11_500 NAND flash |
CPU.B19 | Bank 500 | I/O | 3.3V | |
| J1.134 | NAND_IO7 | CPU.PS_MIO12_500 NAND flash |
CPU.C18 | Bank 500 | I/O | 3.3V | |
| J1.136 | NAND_RD_B/VCFG1 | CPU.PS_MIO8_500 NAND flash |
CPU.E18 | Bank 500 | I/O | 3.3V | This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration. |
| J1.138 | NAND_CLE/VCFG0 | CPU.PS_MIO7_500 NAND flash |
CPU.D18 | Bank 500 | I/O | 3.3V | This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration. |
| J1.140 | DGND | DGND | - | - | - | G | Digital ground |
J2 odd pins (1 to 139)[edit | edit source]
| Pin | Pin Name | Internal Connections | Ball/pin # | Supply Group | Type | Voltage | Note |
| J2.1 | DGND | DGND | - | - | G | - | Digital ground |
| J2.3 | DGND | DGND | - | - | G | - | Digital ground |
| J2.5 | IO_L8P_T1_34 | FPGA.IO_L8P_T1_34 | J2 | Bank 34 | I/O | User defined | |
| J2.7 | IO_L8N_T1_34 | FPGA.IO_L8N_T1_34 | J1 | Bank 34 | I/O | User defined | |
| J2.9 | IO_L6P_T0_34 | FPGA.IO_L6P_T0_34 | M8 | Bank 34 | I/O | User defined | CAN_RX |
| J2.11 | IO_L6N_T0_VREF_34 | FPGA.IO_L6N_T0_VREF_34 | M7 | Bank 34 | I/O | User defined | |
| J2.13 | DGND | DGND | - | - | G | - | Digital ground |
| J2.15 | IO_L3P_T0_DQS_PUDC_B_34 | FPGA.IO_L3P_T0_DQS_PUDC_B_34 | K7 | Bank 34 | I/O | User defined | Internally connected to VDDIO_BANK34 via 10K resistor |
| J2.17 | IO_L3N_T0_DQS_34 | FPGA.IO_L3N_T0_DQS_34 | L7 | Bank 34 | I/O | User defined | |
| J2.19 | IO_L2P_T0_34 | FPGA.IO_L2P_T0_34 | J7 | Bank 34 | I/O | User defined | |
| J2.21 | IO_L2N_T0_34 | FPGA.IO_L2N_T0_34 | J6 | Bank 34 | I/O | User defined | |
| J2.23 | DGND | DGND | - | - | G | - | Digital ground |
| J2.25 | IO_L22P_T3_34 | FPGA.IO_L22P_T3_34 | M4 | Bank 34 | I/O | User defined | |
| J2.27 | IO_L22N_T3_34 | FPGA.IO_L22N_T3_34 | M3 | Bank 34 | I/O | User defined | |
| J2.29 | IO_L21P_T3_DQS_34 | FPGA.IO_L21P_T3_DQS_34 | N4 | Bank 34 | I/O | User defined | |
| J2.31 | IO_L21N_T3_DQS_34 | FPGA.IO_L21N_T3_DQS_34 | N3 | Bank 34 | I/O | User defined | |
| J2.33 | DGND | DGND | - | - | G | - | Digital ground |
| J2.35 | IO_L19P_T3_34 | FPGA.IO_L19P_T3_34 | N6 | Bank 34 | I/O | User defined | CAN_TX |
| J2.37 | IO_L19N_T3_VREF_34 | FPGA.IO_L19N_T3_VREF_34 | N5 | Bank 34 | I/O | User defined | |
| J2.39 | IO_L18P_T2_34 | FPGA.IO_L18P_T2_34 | P3 | Bank 34 | I/O | User defined | |
| J2.41 | IO_L18N_T2_34 | FPGA.IO_L18N_T2_34 | P2 | Bank 34 | I/O | User defined | |
| J2.43 | DGND | DGND | - | - | G | - | Digital ground |
| J2.45 | IO_L15P_T2_DQS_34 | FPGA.IO_L15P_T2_DQS_34 | M2 | Bank 34 | I/O | User defined | |
| J2.47 | IO_L15N_T2_DQS_34 | FPGA.IO_L15N_T2_DQS_34 | M1 | Bank 34 | I/O | User defined | |
| J2.49 | DGND | DGND | - | - | G | - | Digital ground |
| J2.51 | IO_L13P_T1_MRCC_34 | FPGA.IO_L13P_T1_MRCC_34 | T2 | Bank 34 | I/O | User defined | |
| J2.53 | IO_L13N_T1_MRCC_34 | FPGA.IO_L13N_T1_MRCC_34 | T1 | Bank 34 | I/O | User defined | |
| J2.55 | DGND | DGND | - | - | G | - | Digital ground |
| J2.57 | IO_L11P_T1_SRCC_34 | FPGA.IO_L11P_T1_SRCC_34 | K4 | Bank 34 | I/O | User defined | |
| J2.59 | IO_L11N_T1_SRCC_34 | FPGA.IO_L11N_T1_SRCC_34 | K3 | Bank 34 | I/O | User defined | |
| J2.61 | DGND | DGND | - | - | G | - | Digital ground |
| J2.63 | IO_L10P_T1_34 | FPGA.IO_L10P_T1_34 | L2 | Bank 34 | I/O | User defined | |
| J2.65 | IO_L10N_T1_34 | FPGA.IO_L10N_T1_34 | L1 | Bank 34 | I/O | User defined | |
| J2.67 | IO_25_VRP_34 | FPGA.IO_25_VRP_34 | R8 | Bank 34 | I/O | User defined | Optional Internal Termination resistors for DCI |
| J2.69 | IO_0_VRN_34 | FPGA.IO_0_VRN_34 | H8 | Bank 34 | I/O | User defined | Optional Internal Termination resistors for DCI |
| J2.71 | DGND | DGND | - | - | G | - | Digital ground |
| J2.73 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.75 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.77 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.79 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.81 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.83 | ETH0_PHY_RST | LAN.RESET_N | 42 | BANK 501 | O | 1.8V | Internally connected to DGND via 10K resistor |
| J2.85 | USB0_PHY_RST | USB.RESETB | 23 | BANK 501 | O | 1.8V | Internally connected to DGND via 10K resistor |
| J2.87 | CAN_3STn | LEVEL_SHIFTER.3ST# | 6 | BANK 34 | I | User defined | TBD Internally connected to VDDIO_BANK34 via 10K resistor |
| J2.89 | EXT_VMON2_V1 | - | - | - | - | Reserved for future use. Must be left floating. | |
| J2.91 | EXT_VMON2_V2 | - | - | - | - | Reserved for future use. Must be left floating. | |
| J2.93 | RTC_32KHZ | RTC.32KHZ | 1 | 3.3V | O | 3.3V | |
| J2.95 | RTC_RST | RTC.~RST | 4 | 3.3V | I/O | 3.3V | |
| J2.97 | XADC_VN_R | FPGA.VN_0 | L12 | Bank 0 | A | ||
| J2.99 | XADC_VP_R | FPGA.VP_0 | M11 | Bank 0 | A | ||
| J2.101 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.103 | CONN_SPI_RSTn | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.105 | CAN_L | CAN.CANL | 6 | - | D | - | |
| J2.107 | CAN_H | CAN.CANH | 7 | - | D | - | |
| J2.109 | DGND | DGND | - | - | G | - | Digital ground |
| J2.111 | RTC_INT/SQW | RTC.RTC_INT/SQW | 3 | 3.3V | I/O | 3.3V | It can be left open if not used. When used, a proper pull-up resistor is required on the carrier board. For further details, please refer to the Maxim Integrated DS3232 datasheet. |
| J2.113 | RTC_VBAT | RTC.VBAT | 6 | - | S | - | TBD |
| J2.115 | VBAT | CPU.VCCBATT_0 | G14 | - | S | - | TBD |
| J2.117 | DGND | DGND | - | - | G | - | Digital ground |
| J2.119 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.121 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.123 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.125 | DGND | DGND | - | - | G | - | Digital ground |
| J2.127 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.129 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.131 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.133 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.135 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.137 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.139 | DGND | DGND | - | - | G | - | Digital ground |
J2 even pins (2 to 140)[edit | edit source]
| Pin | Pin Name | Internal Connections | Ball/pin # | Supply Group | Type | Voltage | Note |
| J2.2 | DGND | DGND | - | - | G | - | Digital ground |
| J2.4 | IO_L9P_T1_DQS_34 | FPGA.IO_L9P_T1_DQS_34 | J3 | Bank 34 | I/O | User defined | |
| J2.6 | IO_L9N_T1_DQS_34 | FPGA.IO_L9N_T1_DQS_34 | K2 | Bank 34 | I/O | User defined | |
| J2.8 | IO_L7P_T1_34 | FPGA.IO_L7P_T1_34 | J5 | Bank 34 | I/O | User defined | |
| J2.10 | IO_L7N_T1_34 | FPGA.IO_L7N_T1_34 | K5 | Bank 34 | I/O | User defined | |
| J2.12 | DGND | DGND | - | - | G | - | Digital ground |
| J2.14 | IO_L5P_T0_34 | FPGA.IO_L5P_T0_34 | N8 | Bank 34 | I/O | User defined | |
| J2.16 | IO_L5N_T0_34 | FPGA.IO_L5N_T0_34 | P8 | Bank 34 | I/O | User defined | |
| J2.18 | IO_L4P_T0_34 | FPGA.IO_L4P_T0_34 | L6 | Bank 34 | I/O | User defined | |
| J2.20 | IO_L4N_T0_34 | FPGA.IO_L4N_T0_34 | M6 | Bank 34 | I/O | User defined | |
| J2.22 | DGND | DGND | - | - | G | - | Digital ground |
| J2.24 | IO_L24P_T3_34 | FPGA.IO_L24P_T3_34 | P7 | Bank 34 | I/O | User defined | |
| J2.26 | IO_L24N_T3_34 | FPGA.IO_L24N_T3_34 | R7 | Bank 34 | I/O | User defined | |
| J2.28 | IO_L23P_T3_34 | FPGA.IO_L23P_T3_34 | R5 | Bank 34 | I/O | User defined | |
| J2.30 | IO_L23N_T3_34 | FPGA.IO_L23N_T3_34 | R4 | Bank 34 | I/O | User defined | |
| J2.32 | DGND | DGND | - | - | G | - | Digital ground |
| J2.34 | IO_L20P_T3_34 | FPGA.IO_L20P_T3_34 | P6 | Bank 34 | I/O | User defined | |
| J2.36 | IO_L20N_T3_34 | FPGA.IO_L20N_T3_34 | P5 | Bank 34 | I/O | User defined | |
| J2.38 | IO_L1P_T0_34 | FPGA.IO_L1P_T0_34 | J8 | Bank 34 | I/O | User defined | |
| J2.40 | IO_L1N_T0_34 | FPGA.IO_L1N_T0_34 | K8 | Bank 34 | I/O | User defined | |
| J2.42 | DGND | DGND | - | - | G | - | Digital ground |
| J2.44 | IO_L17P_T2_34 | FPGA.IO_L17P_T2_34 | R3 | Bank 34 | I/O | User defined | |
| J2.46 | IO_L17N_T2_34 | FPGA.IO_L17N_T2_34 | R2 | Bank 34 | I/O | User defined | |
| J2.48 | IO_L16P_T2_34 | FPGA.IO_L16P_T2_34 | N1 | Bank 34 | I/O | User defined | |
| J2.50 | IO_L16N_T2_34 | FPGA.IO_L16N_T2_34 | P1 | Bank 34 | I/O | User defined | |
| J2.52 | DGND | DGND | - | - | G | - | Digital ground |
| J2.54 | IO_L14P_T2_SRCC_34 | FPGA.IO_L14P_T2_SRCC_34 | U2 | Bank 34 | I/O | User defined | |
| J2.56 | IO_L14N_T2_SRCC_34 | FPGA.IO_L14N_T2_SRCC_34 | U1 | Bank 34 | I/O | User defined | |
| J2.58 | DGND | DGND | - | - | G | - | Digital ground |
| J2.60 | IO_L12P_T1_MRCC_34 | FPGA.IO_L12P_T1_MRCC_34 | L5 | Bank 34 | I/O | User defined | |
| J2.62 | IO_L12N_T1_MRCC_34 | FPGA.IO_L12N_T1_MRCC_34 | L4 | Bank 34 | I/O | User defined | |
| J2.64 | DGND | DGND | - | - | G | - | Digital ground |
| J2.66 | VDDIO_BANK34 | FPGA.VCCO_34 | K6 H2 L3 N7 P4 R1 |
Bank 34 | S | User defined | Bank34 I/O Power Supply |
| J2.68 | VDDIO_BANK34 | FPGA.VCCO_34 | K6 H2 L3 N7 P4 R1 |
Bank 34 | S | User defined | Bank34 I/O Power Supply |
| J2.70 | VDDIO_BANK34 | FPGA.VCCO_34 | K6 H2 L3 N7 P4 R1 |
Bank 34 | S | User defined | Bank34 I/O Power Supply |
| J2.72 | VDDIO_BANK34 | FPGA.VCCO_34 | K6 H2 L3 N7 P4 R1 |
Bank 34 | S | User defined | Bank34 I/O Power Supply |
| J2.74 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.76 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.78 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J2.80 | JTAG_TDO | CPU.TDO_0 | G9 | BANK 0 | O | 3.3V | |
| J2.82 | JTAG_TDI | CPU.TDI_0 | H9 | BANK 0 | I | 3.3V | |
| J2.84 | JTAG_TMS | CPU.TMS_0 | H10 | BANK 0 | I | 3.3V | |
| J2.86 | JTAG_TCK | CPU.TCK_0 | H11 | BANK 0 | I | 3.3V | |
| J2.88 | DGND | DGND | - | - | G | - | Digital ground |
| J2.90 | FPGA_INIT_B | FPGA.INIT_B_0 | T8 | BANK 0 | I/O | 3.3V | Place external 4.7 kΩ (or stronger) pull-up resistor to BOARD_PGOOD driven +3.3V supply
For more details please refer to Table 2-4 on 7 Series FPGAs Configuration |
| J2.92 | FPGA_PROGRAM_B | FPGA.PROGRAM_B_0 | V10 | BANK 0 | I | 3.3V | Place external 4.7 kΩ (or stronger) pull-up resistor to BOARD_PGOOD driven +3.3V supply
For more details please refer to Table 2-4 on 7 Series FPGAs Configuration (10 kΩ pull-up resistor is already mounted on BORAX module) |
| J2.94 | FPGA_DONE | FPGA.DONE0 | T10 | BANK 0 | I/O | 3.3V | Place external 300Ω pull-up resistor to BOARD_PGOOD driven +3.3V supply
For more details please refer to Table 2-4 on 7 Series FPGAs Configuration |
| J2.96 | WD_SET2 | WDT.SET2 | 6 | 3.3V | I | 3.3V | |
| J2.98 | WD_SET1 | WDT.SET1 | 5 | 3.3V | I | 3.3V | |
| J2.100 | WD_SET0 | WDT.SET0 | 4 | 3.3V | I | 3.3V | |
| J2.102 | DGND | DGND | - | - | G | - | Digital ground |
| J2.104 | PS_MIO50_501 | CPU.PS_MIO50_501 USBOTG.RESETB |
D10 22 |
BANK 501 | I/O | 1.8V | For further details, please refer to Reset_scheme_(BoraXpress)#PS_MIO50_501 |
| J2.106 | PS_MIO51_501 | CPU.PS_MIO51_501 ETHPHY1GB.RESET_N |
C13 42 |
BANK 501 | I/O | 1.8V | For further details, please refer to Reset_scheme_(BoraXpress)#PS_MIO51_501 |
| J2.108 | SOM_PGOOD | SOM_PGOOD_LOGIC.OUT | n.a. | 3.3V | O | 3.3V | Internally connected to DGND via 100K resistor |
| J2.110 | CB_PWR_GOOD | 1.0VREGULATOR.ENABLE SOM_PGOOD_LOGIC.IN |
n.a. | 3.3VIN | I | 3.3V | Internally connected to 3.3VIN via 10K resistor |
| J2.112 | SYS_RSTn | CPU.PS_SRST_B_501 | C14 | BANK 501 | I | 1.8V | Internally connected to 1.8V via 20K resistor |
| J2.114 | PORSTn | CPU.PS_POR_B_500 WD.~WDO NOR.~RESET/RFU |
B18 7 A4 |
BANK 500 | I/O | 3.3V | Internally connected to 3.3VIN via 2.2K resistor. For further details, please refer to Reset_scheme_(BoraXpress)#PORSTn |
| J2.116 | MRSTn | Voltage monitor | 6 | 3.3VIN | I | 3.3V | Internally connected to 3.3VIN via 2.2K resistor
For further details, please refer to Reset_scheme_(BoraXpress) |
| J2.118 | DGND | DGND | - | - | G | - | Digital ground |
| J2.120 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.122 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.124 | DGND | DGND | - | - | G | - | Digital ground |
| J2.126 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.128 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.130 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.132 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.134 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.136 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.138 | 3.3VIN | 3.3VIN | - | 3.3VIN | S | SOM Power Supply | |
| J2.140 | DGND | DGND | - | - | G | - | Digital ground |
J3 odd pins (1 to 139)[edit | edit source]
| Pin | Pin Name | Internal Connections | Ball/pin # | Supply Group | Type | Voltage | Note |
| J3.1 | DGND | DGND | - | - | G | - | Digital ground |
| J3.3 | MGTREFCLK0N | FPGA.MGTREFCLK0N_112 | V9 | MGTAVCC | D | ||
| J3.5 | MGTREFCLK0P | FPGA.MGTREFCLK0P_112 | U9 | MGTAVCC | D | ||
| J3.7 | DGND | DGND | - | - | G | - | Digital ground |
| J3.9 | MGTxTXP0 | FPGA.MGTXTXP0_112 | AA3 | MGTAVCC | D | ||
| J3.11 | MGTxTXN0 | FPGA.MGTXTXN0_112 | AB3 | MGTAVCC | D | ||
| J3.13 | DGND | DGND | - | - | G | - | Digital ground |
| J3.15 | MGTxTXP1 | FPGA.MGTXTXP1_112 | W4 | MGTAVCC | D | ||
| J3.17 | MGTxTXN1 | FPGA.MGTXTXN1_112 | Y4 | MGTAVCC | D | ||
| J3.19 | DGND | DGND | - | - | G | - | Digital ground |
| J3.21 | MGTxTXP2 | FPGA.MGTXTXP2_112 | AA5 | MGTAVCC | D | ||
| J3.23 | MGTxTXN2 | FPGA.MGTXTXN2_112 | AB5 | MGTAVCC | D | ||
| J3.25 | DGND | DGND | - | - | G | - | Digital ground |
| J3.27 | MGTxTXP3 | FPGA.MGTXTXP3_112 | W2 | MGTAVCC | D | ||
| J3.29 | MGTxTXN3 | FPGA.MGTXTXN3_112 | Y2 | MGTAVCC | D | ||
| J3.31 | DGND | DGND | - | - | G | - | Digital ground |
| J3.33 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J3.35 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J3.37 | DGND | DGND | - | - | G | - | Digital ground |
| J3.39 | IO_L23P_T3_13 | FPGA.IO_L23P_T3_13 | V16 | Bank 13 | I/O | User defined | |
| J3.41 | IO_L23N_T3_13 | FPGA.IO_L23N_T3_13 | W16 | Bank 13 | I/O | User defined | |
| J3.43 | DGND | DGND | - | - | G | - | Digital ground |
| J3.45 | IO_L9P_T1_DQS_13 | FPGA.IO_L9P_T1_DQS_13 | AB13 | Bank 13 | I/O | User defined | |
| J3.47 | IO_L9N_T1_DQS_13 | FPGA.IO_L9N_T1_DQS_13 | AB14 | Bank 13 | I/O | User defined | |
| J3.49 | DGND | DGND | - | - | G | - | Digital ground |
| J3.51 | IO_L7P_T1_13 | FPGA.IO_L7P_T1_13 | AA11 | Bank 13 | I/O | User defined | |
| J3.53 | IO_L7N_T1_13 | FPGA.IO_L7N_T1_13 | AB11 | Bank 13 | I/O | User defined | |
| J3.55 | DGND | DGND | - | - | G | - | Digital ground |
| J3.57 | IO_L5P_T0_13 | FPGA.IO_L5P_T0_13 | U11 | Bank 13 | I/O | User defined | |
| J3.59 | IO_L5N_T0_13 | FPGA.IO_L5N_T0_13 | U12 | Bank 13 | I/O | User defined | |
| J3.61 | DGND | DGND | - | - | G | - | Digital ground |
| J3.63 | IO_L4P_T0_13 | FPGA.IO_L4P_T0_13 | V11 | Bank 13 | I/O | User defined | |
| J3.65 | IO_L4N_T0_13 | FPGA.IO_L4N_T0_13 | W11 | Bank 13 | I/O | User defined | |
| J3.67 | DGND | DGND | - | - | G | - | Digital ground |
| J3.69 | DGND | DGND | - | - | G | - | Digital ground |
| J3.71 | IO_L3P_T0_DQS_13 | FPGA.IO_L3P_T0_DQS_13 | W12 | Bank 13 | I/O | User defined | |
| J3.73 | IO_L3N_T0_DQS_13 | FPGA.IO_L3N_T0_DQS_13 | W13 | Bank 13 | I/O | User defined | |
| J3.75 | DGND | DGND | - | - | G | - | Digital ground |
| J3.77 | IO_L2P_T0_13 | FPGA.IO_L2P_T0_13 | V15 | Bank 13 | I/O | User defined | |
| J3.79 | IO_L2N_T0_13 | FPGA.IO_L2N_T0_13 | W15 | Bank 13 | I/O | User defined | |
| J3.81 | DGND | DGND | - | - | G | - | Digital ground |
| J3.83 | IO_L1P_T0_13 | FPGA.IO_L1P_T0_13 | V13 | Bank 13 | I/O | User defined | |
| J3.85 | IO_L1N_T0_13 | FPGA.IO_L1N_T0_13 | V14 | Bank 13 | I/O | User defined | |
| J3.87 | DGND | DGND | - | - | G | - | Digital ground |
| J3.89 | IO_25_13 | FPGA.IO_25_13 | U16 | Bank 13 | I/O | User defined | |
| J3.91 | IO_0_13 | FPGA.IO_0_13 | T16 | Bank 13 | I/O | User defined | |
| J3.93 | DGND | DGND | - | - | G | - | Digital ground |
| J3.95 | VDDIO_BANK13 | FPGA.VCCO_13 | AA13 AB20 T18 Y16 W19 V12 U15 |
Bank 13 | S | User defined | Bank13 I/O Power Supply |
| J3.97 | VDDIO_BANK13 | FPGA.VCCO_13 | AA13 AB20 T18 Y16 W19 V12 U15 |
Bank 13 | S | User defined | Bank13 I/O Power Supply |
| J3.99 | VDDIO_BANK13 | FPGA.VCCO_13 | AA13 AB20 T18 Y16 W19 V12 U15 |
Bank 13 | S | User defined | Bank13 I/O Power Supply |
| J3.101 | DGND | DGND | - | - | G | - | Digital ground |
| J3.103 | DGND | DGND | - | - | G | - | Digital ground |
| J3.105 | IO_L21P_T3_DQS_13 | FPGA.IO_L21P_T3_DQS_13 | V18 | Bank 13 | I/O | User defined | |
| J3.107 | IO_L21N_T3_DQS_13 | FPGA.IO_L21N_T3_DQS_13 | W18 | Bank 13 | I/O | User defined | |
| J3.109 | DGND | DGND | - | - | G | - | Digital ground |
| J3.111 | IO_L19P_T3_13 | FPGA.IO_L19P_T3_13 | R17 | Bank 13 | I/O | User defined | |
| J3.113 | IO_L19N_T3_VREF_13 | FPGA.IO_L19N_T3_VREF_13 | T17 | Bank 13 | I/O | User defined | |
| J3.115 | DGND | DGND | - | - | G | - | Digital ground |
| J3.117 | IO_L18P_T2_13 | FPGA.IO_L18P_T2_13 | AA19 | Bank 13 | I/O | User defined | |
| J3.119 | IO_L18N_T2_13 | FPGA.IO_L18N_T2_13 | AA20 | Bank 13 | I/O | User defined | |
| J3.121 | DGND | DGND | - | - | G | - | Digital ground |
| J3.123 | IO_L16P_T2_13 | FPGA.IO_L16P_T2_13 | AB18 | Bank 13 | I/O | User defined | |
| J3.125 | IO_L16N_T2_13 | FPGA.IO_L16N_T2_13 | AB19 | Bank 13 | I/O | User defined | |
| J3.127 | DGND | DGND | - | - | G | - | Digital ground |
| J3.129 | IO_L14P_T2_SRCC_13 | FPGA.IO_L14P_T2_SRCC_13 | AA16 | Bank 13 | I/O | User defined | |
| J3.131 | IO_L14N_T2_SRCC_13 | FPGA.IO_L14N_T2_SRCC_13 | AA17 | Bank 13 | I/O | User defined | |
| J3.133 | DGND | DGND | - | - | G | - | Digital ground |
| J3.135 | IO_L12P_T1_MRCC_13 | FPGA.IO_L12P_T1_MRCC_13 | Y14 | Bank 13 | I/O | User defined | |
| J3.137 | IO_L12N_T1_MRCC_13 | FPGA.IO_L12N_T1_MRCC_13 | Y15 | Bank 13 | I/O | User defined | |
| J3.139 | DGND | DGND | - | - | G | - | Digital ground |
J3 even pins (2 to 140)[edit | edit source]
| Pin | Pin Name | Internal Connections | Ball/pin # | Supply Group | Type | Voltage | Note |
| J3.2 | DGND | DGND | - | - | G | - | Digital ground |
| J3.4 | DGND | DGND | - | - | G | - | Digital ground |
| J3.6 | MGTREFCLK1N | FPGA.MGTREFCLK1N_112 | V5 | MGTAVCC | D | ||
| J3.8 | MGTREFCLK1P | FPGA.MGTREFCLK1P_112 | U5 | MGTAVCC | D | ||
| J3.10 | DGND | DGND | - | - | G | - | Digital ground |
| J3.12 | MGTxRXP0 | FPGA.MGTXRXP0_112 | AA7 | MGTAVCC | D | ||
| J3.14 | MGTxRXN0 | FPGA.MGTXRXN0_112 | AB7 | MGTAVCC | D | ||
| J3.16 | DGND | DGND | - | - | G | - | Digital ground |
| J3.18 | MGTxRXP1 | FPGA.MGTXRXP1_112 | W8 | MGTAVCC | D | ||
| J3.20 | MGTxRXN1 | FPGA.MGTXRXN1_112 | Y8 | MGTAVCC | D | ||
| J3.22 | DGND | DGND | - | - | G | - | Digital ground |
| J3.24 | MGTxRXP2 | FPGA.MGTXRXP2_112 | AA9 | MGTAVCC | D | ||
| J3.26 | MGTxRXN2 | FPGA.MGTXRXN2_112 | AB9 | MGTAVCC | D | ||
| J3.28 | DGND | DGND | - | - | G | - | Digital ground |
| J3.30 | MGTxRXP3 | FPGA.MGTXRXP3_112 | W6 | MGTAVCC | D | ||
| J3.32 | MGTxRXN3 | FPGA.MGTXRXN3_112 | Y6 | MGTAVCC | D | ||
| J3.34 | DGND | DGND | - | - | G | - | Digital ground |
| J3.36 | DGND | DGND | - | - | G | - | Digital ground |
| J3.38 | IO_L24P_T3_13 | FPGA.IO_L24P_T3_13 | W17 | Bank 13 | I/O | User defined | |
| J3.40 | IO_L24N_T3_13 | FPGA.IO_L24N_T3_13 | Y17 | Bank 13 | I/O | User defined | |
| J3.42 | DGND | DGND | - | - | G | - | Digital ground |
| J3.44 | IO_L10P_T1_13 | FPGA.IO_L10P_T1_13 | Y12 | Bank 13 | I/O | User defined | |
| J3.46 | IO_L10N_T1_13 | FPGA.IO_L10N_T1_13 | Y13 | Bank 13 | I/O | User defined | |
| J3.48 | DGND | DGND | - | - | G | - | Digital ground |
| J3.50 | IO_L8P_T1_13 | FPGA.IO_L8P_T1_13 | AA12 | Bank 13 | I/O | User defined | |
| J3.52 | IO_L8N_T1_13 | FPGA.IO_L8N_T1_13 | AB12 | Bank 13 | I/O | User defined | |
| J3.54 | DGND | DGND | - | - | G | - | Digital ground |
| J3.56 | IO_L6P_T0_13 | FPGA.IO_L6P_T0_13 | U13 | Bank 13 | I/O | User defined | |
| J3.58 | IO_L6N_T0_VREF_13 | FPGA.IO_L6N_T0_VREF_13 | U14 | Bank 13 | I/O | User defined | |
| J3.60 | DGND | DGND | - | - | G | - | Digital ground |
| J3.62 | MON_MGTAVCC | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.64 | MON_MGTAVCCAUX | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.66 | MON_MGTAVTT | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.68 | DGND | DGND | - | - | G | - | Digital ground |
| J3.70 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J3.72 | MON_VCCPLL | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.74 | MON_XADC_VCC | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.76 | MON_FPGA_VDDIO_BANK35 | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.78 | MON_FPGA_VDDIO_BANK34 | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.80 | MON_FPGA_VDDIO_BANK13 | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.82 | MON_1.8V_IO | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.84 | MON_3.3V | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.86 | MON_1V2_ETH | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.88 | MON_VDDQ_1V5 | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.90 | MON_1.8V | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.92 | MON_1.0V | A | By default this pin must not be connected. Optionally it can route power voltage generated by BoraXpress PSU. This option is meant to allow monitoring such voltage by carrier board circuitry. It is not meant to power carrier board devices. For more information please contact technical support. | ||||
| J3.94 | DGND | DGND | - | - | G | - | Digital ground |
| J3.96 | VDDIO_BANK13 | FPGA.VCCO_13 | AA13 AB20 T18 Y16 W19 V12 U15 |
Bank 13 | S | User defined | Bank13 I/O Power Supply |
| J3.98 | VDDIO_BANK13 | FPGA.VCCO_13 | AA13 AB20 T18 Y16 W19 V12 U15 |
Bank 13 | S | User defined | Bank13 I/O Power Supply |
| J3.100 | RFU | - | - | - | - | - | Reserved for future use. Must be left floating. |
| J3.102 | DGND | DGND | - | - | G | - | Digital ground |
| J3.104 | IO_L22P_T3_13 | FPGA.IO_L22P_T3_13 | U17 | Bank 13 | I/O | User defined | |
| J3.106 | IO_L22N_T3_13 | FPGA.IO_L22N_T3_13 | U18 | Bank 13 | I/O | User defined | |
| J3.108 | DGND | DGND | - | - | G | - | Digital ground |
| J3.110 | IO_L20P_T3_13 | FPGA.IO_L20P_T3_13 | U19 | Bank 13 | I/O | User defined | |
| J3.112 | IO_L20N_T3_13 | FPGA.IO_L20N_T3_13 | V19 | Bank 13 | I/O | User defined | |
| J3.114 | DGND | DGND | - | - | G | - | Digital ground |
| J3.116 | IO_L17P_T2_13 | FPGA.IO_L17P_T2_13 | AB16 | Bank 13 | I/O | User defined | |
| J3.118 | IO_L17N_T2_13 | FPGA.IO_L17N_T2_13 | AB17 | Bank 13 | I/O | User defined | |
| J3.120 | DGND | DGND | - | - | G | - | Digital ground |
| J3.122 | IO_L15P_T2_DQS_13 | FPGA.IO_L15P_T2_DQS_13 | AB21 | Bank 13 | I/O | User defined | |
| J3.124 | IO_L15N_T2_DQS_13 | FPGA.IO_L15N_T2_DQS_13 | AB22 | Bank 13 | I/O | User defined | |
| J3.126 | DGND | DGND | - | - | G | - | Digital ground |
| J3.128 | IO_L13P_T2_MRCC_13 | FPGA.IO_L13P_T2_MRCC_13 | Y18 | Bank 13 | I/O | User defined | |
| J3.130 | IO_L13N_T2_MRCC_13 | FPGA.IO_L13N_T2_MRCC_13 | Y19 | Bank 13 | I/O | User defined | |
| J3.132 | DGND | DGND | - | - | G | - | Digital ground |
| J3.134 | IO_L11P_T1_SRCC_13 | FPGA.IO_L11P_T1_SRCC_13 | AA14 | Bank 13 | I/O | User defined | |
| J3.136 | IO_L11N_T1_SRCC_13 | FPGA.IO_L11N_T1_SRCC_13 | AA15 | Bank 13 | I/O | User defined | |
| J3.138 | DGND | DGND | - | - | G | - | Digital ground |
| J3.140 | DGND | DGND | - | - | G | - | Digital ground |
