Pinout (BORAXpress)

Info Box Applies to BORA Xpress

Introduction

This chapter contains the pinout description of the BORA Xpress module, grouped in six tables (two – odd and even pins – for each connector) that report the pin mapping of the three 140-pin BORA Xpress connectors. Each row in the pinout tables contains the following information:

• Pin: reference to the connector pin
• Pin Name: pin (signal) name on the BORA Xpress connectors
• Internal connections: connections to the BORA Xpress components
  • CPU.<x> : pin connected to CPU (processing system) pad named <x>
  • FPGA.<x>: pin connected to FPGA (programmable logic) pad named <x>
  • CAN.<x> : pin connected to the CAN transceiver
  • LAN.<x> : pin connected to the LAN PHY
  • USB.<x> : pin connected to the USB transceiver
  • NAND.<x>: pin connected to the flash NAND
  • NOR.<x>: pin connected to the flash NOR
  • SV.<x>: pin connected to voltage supervisor
  • MTR: pin connected to voltage monitors
• Ball/pin #: Component ball/pin number connected to signal
• Supply Group: Power Supply Group
• Type: pin type
  • I = Input
  • O = Output
  • D = Differential
  • Z = High impedance
  • S = Power supply voltage
  • G = Ground
  • A = Analog signal
• Voltage: I/O voltage levels

J1 odd pins (1 to 139)

Pin	Pin Name	Internal Connections	Ball/pin #	Supply Group	Type	Voltage	Note
J1.1	DGND	DGND	-	-	-	-
J1.3	IO_25_VRP_35	FPGA.IO_25_35/IO_25_VRP_35	H5	Bank 35	I/O	User defined	Optional on-board pull-down
J1.5	IO_L23P_T3_35	FPGA.IO_L10P_T1_AD11P_35	F2	Bank 35	I/O	User defined
J1.7	IO_L23N_T3_35	FPGA.IO_L23N_T3_35	F1	Bank 35	I/O	User defined
J1.9	IO_L21P_T3_DQS_AD14P_35	FPGA.IO_L21P_T3_DQS_AD14P_35	E4	Bank 35	I/O	User defined
J1.11	IO_L21N_T3_DQS_AD14N_35	FPGA.IO_L21N_T3_DQS_AD14N_35	E3	Bank 35	I/O	User defined
J1.13	DGND	DGND	-	-	-	-
J1.15	IO_L19P_T3_35	FPGA.IO_L19P_T3_35	H4	Bank 35	I/O	User defined
J1.17	IO_L19N_T3_VREF_35	FPGA.IO_L19N_T3_VREF_35	H3	Bank 35	I/O	User defined
J1.19	DGND	DGND	-	-	-	-
J1.21	IO_L17P_T2_AD5P_35	FPGA.IO_L17P_T2_AD5P_35	E2	Bank 35	I/O	User defined
J1.23	IO_L17N_T2_AD5N_35	FPGA.IO_L17N_T2_AD5N_35	D2
J1.25	IO_L15P_T2_DQS_AD12P_35	FPGA.IO_L15P_T2_DQS_AD12P_35	A2
J1.27	IO_L15N_T2_DQS_AD12N_35	FPGA.IO_L15N_T2_DQS_AD12N_35	A1
J1.29	DGND	DGND	-	-	-	-
J1.31	IO_L13P_T2_MRCC_35	FPGA.IO_L13P_T2_MRCC_35	B4
J1.33	IO_L13N_T2_MRCC_35	FPGA.IO_L13N_T2_MRCC_35	B3
J1.35	DGND	DGND	-	-	-	-
J1.37	IO_L11P_T1_SRCC_35	FPGA.IO_L11P_T1_SRCC_35	C6
J1.39	IO_L11N_T1_SRCC_35	FPGA.IO_L11N_T1_SRCC_35	C5
J1.41	IO_L9P_T1_DQS_AD3P_35	FPGA.IO_L9P_T1_DQS_AD3P_35	A7
J1.43	IO_L9N_T1_DQS_AD3N_35	FPGA.IO_L9N_T1_DQS_AD3N_35	A6
J1.45	IO_L7P_T1_AD2P_35	FPGA.IO_L7P_T1_AD2P_35	C8
J1.47	IO_L7N_T1_AD2N_35	FPGA.IO_L7N_T1_AD2N_35	B8
J1.49	DGND	DGND	-	-	-	-
J1.51	IO_L5P_T0_AD9P_35	FPGA.IO_L5P_T0_AD9P_35	F5
J1.53	IO_L5N_T0_AD9N_35	FPGA.IO_L5N_T0_AD9N_35	E5
J1.55	IO_L3P_T0_DQS_AD1P_35	FPGA.IO_L3P_T0_DQS_AD1P_35	E8
J1.57	IO_L3N_T0_DQS_AD1N_35	FPGA.IO_L3N_T0_DQS_AD1N_35	D8
J1.59	DGND	DGND	-	-	-	-
J1.61	IO_L1P_T0_AD0P_35	FPGA.IO_L1P_T0_AD0P_35	F7
J1.63	IO_L1N_T0_AD0N_35	FPGA.IO_L1N_T0_AD0N_35	E7
J1.65	DGND	DGND	-	-	-	-
J1.67	VDDIO_BANK35
J1.69	XADC_AGND
J1.71	XADC_AGND
J1.73	PS_MIO45_501	CPU.PS_MIO45_501	B14	Bank 501	I/O	1.8V
J1.75	PS_MIO44_501	CPU.PS_MIO44_501	E10	Bank 501	I/O	1.8V
J1.77	PS_MIO43_501	CPU.PS_MIO43_501	B12	Bank 501	I/O	1.8V
J1.79	PS_MIO42_501	CPU.PS_MIO42_501	D15	Bank 501	I/O	1.8V
J1.81	PS_MIO41_501	CPU.PS_MIO41_501	C15	Bank 501	I/O	1.8V
J1.83	DGND	DGND	-	-	-	-
J1.85	PS_MIO40_501	CPU.PS_MIO40_501	E9	Bank 501	I/O	1.8V
J1.87	ETH_MDIO	CPU.PS_MIO53_501	C11	Bank 501	I/O	1.8V	1kOhm pull-up
J1.89	ETH_MDC	CPU.PS_MIO51_501	D13	Bank 501	I/O	1.8V
J1.91	ETH_LED1	LAN.LED1/PME_N1	17	-		1.8V	10kOhm pull-up
J1.93	ETH_LED2	LAN.LED2	15	-		1.8V	10kOhm pull-up
J1.95	DGND	DGND	-	-	-	-
J1.97	ETH_TXRX1_M	LAN.TXRXM_B	6		D
J1.99	ETH_TXRX1_P	LAN.TXRXP_B	5		D
J1.101	DGND	DGND	-	-	-	-
J1.103	ETH_TXRX0_M	LAN.ETH_TXRX0_M	3		D
J1.105	ETH_TXRX0_P	LAN.ETH_TXRX0_P	2		D
J1.107	DVDDH	LAN.DVDDH	16 34 40
J1.109	RFU	-	-	-	-	-	Reserved fo future use. Must be left floating.
J1.111	USBOTG_CPEN	USB.CPEN	7			3.3V
J1.113	OTG_VBUS	USB.OTG_VBUS	2
J1.115	OTG_ID	USB.ID	1
J1.117	DGND	DGND	-	-	-	-
J1.119	SPI0_DQ3/MODE0/NAND_IO0	"CPU.PS_MIO5_500
NOR flash
NAND flash"	CPU.A20	Bank 500	I/O	3.3V	This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration.
J1.121	SPI0_DQ2/MODE2/NAND_IO2	"CPU.PS_MIO4_500
NOR flash
NAND flash"	CPU.E19	Bank 500	I/O	3.3V	This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration.
J1.123	SPI0_DQ1/MODE1/NAND_WE	"CPU.PS_MIO3_500
NOR flash
NAND flash"	CPU.F17	Bank 500	I/O	3.3V	This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration.
J1.125	SPI0_DQ0/MODE3/NAND_ALE	"CPU.PS_MIO2_500
NOR flash
NAND flash"	CPU.A21	Bank 500	I/O	3.3V	This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration.
J1.127	DGND	DGND	-	-	-	-
J1.129	SPI0_SCLK/MODE4/NAND_IO1	"CPU.PS_MIO6_500
NOR flash
NAND flash"	CPU.A19	Bank 500	I/O	3.3V	This signal is pulled up or down by 20kOhm resistor to select proper bootstrap configuration.
J1.131	NAND_BUSY	"CPU.PS_MIO14_500
NOR flash
NAND flash"	CPU.B17	Bank 500	I/O	3.3V	10kOhm pull-up
J1.133	PS_MIO15_500	"CPU.PS_MIO15_500
WDT.WDI
"	"CPU.E17
WDT.1"	Bank 500	I/O	3.3V	See also this page
J1.135	RFU	-	-	-	-	-	Reserved fo future use. Must be left floating.
J1.137	MEM_WPn	"NAND.WP
NOR.WP/IO2"	"NAND.19
NOR.C4"			3.3V
J1.139	DGND	DGND	-	-	-	-