3,260
edits
Changes
→Exporting generated source file
MUX_VAL(PINCNTL3, (IEN | IPU | FCN1 )) /* SD1_DAT[0] */\
</cpp>
Before building and installing the new binaries we suggest to take a look at the [[wikipedia:Diff|diff]] between the original pinmux.h and the generated one. The changed should be restricted only on the user chosen pins
<diff>
diff --git a/board/dave/naon/pinmux.h b/board/dave/naon/pinmux.h
index c1fccd6..0e6b2e2 100644
--- a/board/dave/naon/pinmux.h
+++ b/board/dave/naon/pinmux.h
@@ -208,8 +208,8 @@ MUX_VAL(PINCNTL168, (IEN | IPU | DISABLED )) /* safe_mode */\
MUX_VAL(PINCNTL169, (IEN | IPD | DISABLED )) /* safe_mode */\
MUX_VAL(PINCNTL170, (IEN | IPD | DISABLED )) /* safe_mode */\
MUX_VAL(PINCNTL171, (IEN | IPD | DISABLED )) /* safe_mode */\
-MUX_VAL(PINCNTL172, (IEN | IPD | DISABLED )) /* safe_mode */\
-MUX_VAL(PINCNTL173, (IEN | IPU | DISABLED )) /* safe_mode */\
+MUX_VAL(PINCNTL172, (IDIS | IPD | FCN6 )) /* UART2_RXD_MUX0 */\
+MUX_VAL(PINCNTL173, (IDIS | IPD | FCN6 )) /* UART2_TXD_MUX1 */\
MUX_VAL(PINCNTL174, (IEN | IPD | DISABLED )) /* safe_mode */\
MUX_VAL(PINCNTL175, (IEN | IPD | FCN1 )) /* VOUT[0]_FLD_MUX1 */\
MUX_VAL(PINCNTL176, (IEN | IPD | FCN1 )) /* VOUT[0]_CLK */\
</diff>
{{Board Specific Information|text=To avoid timestamp problems and broken dependency, before building U-Boot we suggest to run '''u-boot_clean''' target: