Bureaucrats, dave_user, Administrators
4,650
edits
Changes
→Multi-protocol UARTs
| MPUART0 || UART7 || J34 || 2-wire RS232 || <code>/dev/ttymxc6</code> ||
|-
| MPUART1 || UART3 || J21 || RS485 [1]|| <code>/dev/ttymxc2</code> ||
|-
|}
| MPUART0 || UART8 || J34 || 2-wire RS232 || <code>/dev/ttymxc7</code> ||
|-
| MPUART1 || UART3 || J21 || RS485 [1] || <code>/dev/ttymxc2</code> ||
|-
|}
[1] Supported baud rate range: 9600 Bps - 115200 Bps.
==UART2 on mezzanine connector J53==
Please note that '''this UART is not available if WiFi/Bluetooth module is populated'''.
