Bureaucrats, dave_user, Administrators
8,154
edits
Changes
→UART2 on mezzanine connector J53
|1.2.0
|Update for new XUELK release
|-
|2.0.0
|September 2017
|2.0.0
|Validated on latest XUELK release
|-
|}
|-
|}
===Ordering code: XUBxx0xxx1xXUBxx0xxxxx===
{| class="wikitable"
|-
|-
| MPUART1 || UART3 || J21 || RS485 [1] || <code>/dev/ttymxc2</code> ||
|-
|}
[1] Supported baud rate range: 9600 Bps - 115200 Bps.
===Ordering code: XUBxx3xxxxx===
{| class="wikitable"
|-
! Physical device !! Processor's resource !! Connector !! Type !! Linux device file !! Notes
|-
| MPUART0 || UART8 || J38 || RS485 [1] || <code>/dev/ttymxc7</code> ||
|-
| MPUART1 || UART3 || J39 || RS485 [1] || <code>/dev/ttymxc2</code> ||
|-
|}
|-
|}
==CAN==
Please note that '''the CAN interface is optionally available on J21 or J40 connectors''' with a custom Order code.
{| class="wikitable"
|-
! Processor's resource !! Connector !! Type !! Linux device file !! Notes
|-
| FLEXCAN1 || J21 or J40 || PHY translated (on-board)|| <code>can0</code> || Alternative mount of MPUART1 (not available)
|-
|}
==Ethernet==
Ethernet port is associated to <code>eth0</code> interface. It can be managed with standard Linux commands. See for example http://www.tecmint.com/ifconfig-command-examples/.
