Bureaucrats, dave_user, Administrators
8,185
edits
Changes
no edit summary
=== LED ===
The two LEDs, connected to the ethernet PHY are configured as ''Tri-color dual-LED mode'' (see more info in the [https://ww1.microchip.com/downloads/en/DeviceDoc/00002117F.pdf#page=24 KSZ9031 datasheet]): link/activity for 100mbit/s and link/activity/ for 1000mbit/s.
<section end=Ethernet/>
<section end=micro SD/>
<section begin=NOR_NAND/>
==NOR and NAND flash==
{{ImportantMessage|text=NOR and NAND flash memories cannot be accessed at the same time because they shares some Zynq pins. In U-boot the switching between accesses to NOR and NAND is automatically done by U-boot itself. By default in kernel only NAND flash can be accessed. For NOR support in kernel please contact [mailto:support-bora@dave.eu technical support].}}
mtd7: 3f000000 00020000 "nand-ubi"
</pre>
<section end=NOR_NAND/>
<section begin=USB OTG/>
==CAN==
See [[BoraXEVB#CAN_-_J24 BORA_Xpress_SOM/BORA_Xpress_Evaluation_Kit/Interfaces_and_Connectors/CAN | CAN Pinout]] page and [[Creating_and_building_example_Vivado_project_(BORA_SOM/BELK-L/Development/BXELK) Creating_and_building_a_Vivado_example | BXELK Vivado project]] for more details.
{| class="wikitable"
</pre>
See [[Advanced_use_of_Yocto_build_system_(BORA_SOM/BELK-L/Development/BXELK)Advanced_use_of_Yocto_build_system | Advanced use of Yocto build system]] for more information about using Yocto packages and <code>smart</code>
<section end=CAN/>
<section begin=UART0/>
==UART0==
UART0 is a spare UART device available on the JP17 PMOD connector. This device is routed through the PL.
See [[Creating_and_building_example_Vivado_project_(BORA_SOM/BELK-L/Development/BXELK) Creating_and_building_a_Vivado_example | BXELK Vivado project]] for more details.
{| class="wikitable"
<section begin=Temperature sensors/>
== Temperature sensors ==
Bora SOM has a [http://www.ti.com/lit/ds/symlink/tmp422.pdf TMP421AIDCN] temperature sensor onboard.
